Matiz immo problem

[antlio]

Hi

I have a Daewoo Matiz with immo problem . When the customer started the engine the battery had low 12v and the car didn t start . Then the immo lamp always was on .Ecu is Kemsco 4R model 2003 with 29f200bb and immo with L56R .I opened the immo box and i fount that there wasn t keys written in L56R .So i believe that keys are lost from the file from low 12v .If i will use T300 and program the keys again the car will start? Is there someone to tested it before because the car is far away from me ? If T300 not work what else must i do exept from emulator that i tested and didn t work .

regards

[ciptel07]

yes, program the keys again and put new battery.

[antlio]

Hi

Thanks for your answer . Did you try with t300 in the past this and it worked ? Must i will reset also the ecu or not?

regards

[ciptel07]

I make with mvp key programer

[Meat-Head]

Did u fix this

[keysph]

This is a common problem with matiz/spark. When low power suply occur it erase the keys. Don't forgot to put back the OBD cap after you finish programing procedure. It has a resistor in the cap that must be in place.