PDA

View Full Version : Ford Transit connect new Galletto



budG60
22nd October, 2012, 11:02 PM
Hi,
Does someone have any experience with a new galletto and a Frod transit connect 1.8tdci from 2005 with Delphy ecu / ST10F269?
I have tried to read the ecu, but it does not work. Ecu data is fine and to read it you will have to turn off and on the dash a few times. It seems to read, but no file is present.

budG60
8th January, 2013, 06:17 PM
I have tried to flash the ecu when removed from the car, but still no luck. Does anyone know if the attached connections are fine?

xbobcz
8th January, 2013, 08:19 PM
On your picture, it isn't Delphi ECU, but older FoMoCo EEC Ecu (made by Visteon). It doesn't use CAN but J1850PWM (SCP) protocol.
Power connection is OK - PINs marked CAN- and CAN+ are J1850PWM - +

PIN13 - Programming voltage 18V during programming or reading in security mode
PIN15 - SCP -
PIN16 - SCP +

PIN97 +12V
PIN8 +12V ignition
PIN55 +12V Keep alive power
PIN76 PIN77 PIN 103 - Ground