View Full Version : help immo off golf4 1.4 16v IAW 4AV.V0 29f200
mexanico1971
24th October, 2012, 12:58 AM
HI !
does anyone know"s the solution for immo off in this ECU ?
IAW4AV.V0
61600.346.13
036 906 014 AA
this one have a 29F200AB
I gonna lef some pic"s of the ECU !
Thank"s in Advance
BR
cqae
24th October, 2012, 02:34 AM
i cant help you with an immo off, but see the 4 leg chip thats under the cover you have removed? if you read that then swap it with the info in the replecement ecu it will start, or swap chips
Lt Data
24th October, 2012, 09:23 PM
93c56? Read and post Dump.
cqae
25th October, 2012, 12:40 AM
in regards to your pm mexanico, I have replied, but please direct your questions in here so others can learn from our experience
aksimo
7th November, 2012, 05:35 PM
You need pin from dash and dash adapt 10 ch 000 ok done.
Immo off not so easy flash from tuner or emulator.
:beheaded:
Pali33
12th November, 2012, 08:39 AM
Hello,
did you solved immo off for this ECU? Is this possible?
Thanks.
aksimo
12th November, 2012, 08:47 AM
no immo off, I have taken the pin from dash and recoded it and works.
Pali33
12th November, 2012, 09:04 AM
sorry, i was thinking of MEXICANO1971.
But thanks for your answer.
@Mexicano1971 :
did you solved immo off for this ECU?
aksimo
12th November, 2012, 09:08 AM
sorry, i was thinking of MEXICANO1971.
But thanks for your answer.
@Mexicano1971 :
did you solved immo off for this ECU?
Ok no problem
mexanico1971
12th November, 2012, 10:32 AM
Hello,
did you solved immo off for this ECU? Is this possible?
Thanks.
Hi !
akimo is rigth !
no solution yet !
recode the dash width the ecu !
BR
cqae
12th November, 2012, 12:26 PM
I didn't immo off mine. I swapped info on the chips. The 93c56
Cdoc
5th August, 2013, 12:46 PM
HI
IN THIS ECU is a 95040 no 93c56
thanks fab
cristion
21st March, 2016, 09:27 AM
Hello, I have a VW golf 4 ecu IAW4AV with this problem IMMO and I wanted to ask if you can make any changes in memory dash walk or replace the computer with another from Siemens or Bosh but do not know what to replace it, thanks in advance
electrones
21st March, 2016, 01:16 PM
.................................................. ...
electrones
21st March, 2016, 01:18 PM
Hi friend
Yes u can make your virgim dump and recode or synchronize ECU with the dash, but u will need a pin code, but u can not change MM to Siemens or Bosch ECU that can not fit in Cheers
cristion
23rd March, 2016, 09:17 AM
Thanks, i syncronize ecu with the dash , i have a pin
cristion
24th March, 2016, 08:26 AM
Thanks, i syncronize ecu with the dash , i have a pin
JakeGT
27th September, 2021, 06:29 PM
Apologies for bringing up an old thread but is it now possible to read pin from ECU dump?
rafal
27th September, 2021, 06:31 PM
Apologies for bringing up an old thread but is it now possible to read pin from ECU dump?
what ecu?
info please
JakeGT
1st October, 2021, 10:09 PM
036906014AA
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.