View Full Version : Daewoo Lanos
theodor229
24th October, 2012, 09:09 AM
please help immo off this ecu
Delco Delphi 09388029 DLBZ
Hybrith with 95020
theodor229
24th October, 2012, 10:54 AM
Can anybody help me?
stormb
24th October, 2012, 02:19 PM
Hi!You need immo off flash dump,not an eeprom.
theodor229
24th October, 2012, 02:31 PM
No , its not in flash its like this : http://www.digital-kaos.co.uk/forums/f178/daewoo-lanos-im710-hybrid-ecu-218682/
bugajewski have the solution
please pass or help
thanks
theodor229
24th October, 2012, 03:32 PM
:party:
any help ?
stormb
24th October, 2012, 03:46 PM
If you have tools for reading FLASH dump,I will help you.
theodor229
24th October, 2012, 03:52 PM
do you have pinouts ?
stormb
24th October, 2012, 11:10 PM
B3,B2 connect to +12v;A1 conn. to GND;K-line to B15.A-grey connector,B-black one.Full dump should be 256KB.
bugajewski_pl
25th October, 2012, 08:35 AM
eeprom with immo off
Pass in PM
eliasole
10th November, 2012, 08:12 AM
eeprom with immo off
Pass in PM
Hi , i need that file to , i have same ecu for repair.:giveup:
also is there any trick to desolder the chip?
Is any chance to read it without desolder it?
I use upa.
Thanks!!
ChipDoctor
21st February, 2013, 06:30 PM
eeprom with immo off
Pass in PM
Hello my friend
I have the same ecu can you give me the pass pleaseeee.
Thanks!!!
ftc
14th March, 2016, 10:50 AM
Please bugajewski_pl (http://www.digital-kaos.co.uk/forums/member.php/96050-bugajewski_pl)
.pass file inmo off daewo lanos.95020 fault.Thanks in advance
ddomi
6th May, 2016, 08:35 PM
Hello mate
I need the pass please
I have the same problem
thank you
vladanr
7th May, 2016, 12:59 PM
hi ,
imodecoder 3 can do immo off ,testeed 100%
Fec001
2nd August, 2018, 09:23 AM
If I program immo off dump to eprom, immobox must be disconnected or can be stay connected?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.