Becker BE2580 in Alfaromeo

[dekoderi]

Hi,
Can anyone find the code through serial,I do not have programer to read the flash.
if can anyone help me I would be grateful.
Becker - BE2580
Serial- Y5045462


best regards

[andersonmaxi]

BE2580 recode (decode impossible) only possible by reading and writing AM29F800 flash.

[dekoderi]

I saw in the forum that someone had found with martech !!!

[gepakg]

for other codes,but for ICS only read/write flash 29f400 or 29f800 depend on version

regards Gepa


I saw in the forum that someone had found with martech !!!

[cp9]

try 5285 or 6366
good luck

[dekoderi]

code 5285 and 6366 not ok

[bogege]

code 5285 and 6366 not ok

Please read before your next post!
Here:http://www.digital-kaos.co.uk/forums/search.php?searchid=12199046

[dekoderi]

!!!!! ??????

[bogege]

!!!!! ??????

Look here:
http://www.digital-kaos.co.uk/forums/search.php?searchid=12206863

[gepakg]

for that money better to desolder flash,20min.job:proud:

regards Gepa


New activation BE2580 systems supports ;

- calculate original navigation and radio codes(ICS-NAVI/RADIO) from serial number (Alfa Romeo, Lancia)
(one calculation of two codes per day) BE2580 Systems - Martech (http://shop.martech.pl/en/programs/57-be2580-systems-.html)


Check this post http://www.digital-kaos.co.uk/forums/f176/alfa-166-code-radio-navigation-help-299850/ (http://www.digital-kaos.co.uk/forums/f176/alfa-166-code-radio-navigation-help-299850/)

[tech mobil]

for that money better to desolder flash,20min.job:proud:

regards Gepa

You are right - you need to have programmer and socket. You need also desire to soldering and skills to do it. Everyone choose own needs... and work comfort counts too.

[dekoderi]

Hi,
Can anyone find the code through serial,I do not have programer to read the flash.
if can anyone help me I would be grateful.
Becker - BE2580
Serial- Y5045462
best regards

[Zoka52]

Read flash in Siemens.

[zorans]

Hello to all,
I have olso be250 navi from alfa 166. I try to do like nyo4 describe but to me not work. After program 29f800 (standard pinout) with possible code, navi start with screen "Bootsektor 5.25 AR , LADE LOADER". I have one cd with softver for alfa166 and after finish first step, start next screen "Loader 5.24 NVAR, Lade ICS Version 5.51" and on bottom screen " ERROR 3: 0.0 (code:1 Bytes:1)" !? Know somebody what mean that? Have somebody contents for flash for standard and reverse pinout for version ICS 5.51?
Thanks in advance,
ZoranS

[zorans]

correct: be250=be2580
data for navi: siemens 5WK 78220 SN:AR2200052995/01

[zorans]

Damp attached.

[lesi02]

Hy!
Please help me.
Alfa ICS
5Wk78100
AR1000187081/03
SW3.40
No Becker number, there is no paper in the.