AdBlue Module on Iveco & Trucks

[minchion]

Hi DK friends !
I saw this emulator for AdBlue on a chinese site,
the EU emulators are much more expensive for the moment,
has anyone tried it on Iveco or other Truck ?
Truck Adblue Emulator for IVECO (http://www.ecutool.com/Truck-Adblue-Emulator-for-IVECO_10315.html)

[mufti]

I ordered an one ... next week i post the result ...

[minchion]

I ordered an one ... next week i post the result ...
Thankyou ! I hope it works !!!

[minchion]

I ordered an one ... next week i post the result ...
Did you got it ? report please !!

[klonone]

i purchar 1 emulator remove adblue man truck
i report resullt..
regards

[minchion]

i purchar 1 emulator remove adblue man truck
i report resullt..
regards

Hi ! where did you bought it from ?

[augustinbz]

i tried for Volvo and Iveco => NOT WORKING !
Too much headache... fu** that stupid vendor. "Here we tested and works very good!".... mda... for sure they don't have such trucks in China. They have MingShontsung trucks :)))

[atomiczen]

tested one from china for iveco stralis today
Don't Work!!!! stay away
waste of time and money

[minchion]

tested one from china for iveco stralis today
Don't Work!!!! stay away
waste of time and money
Thanks !
has you try any other module that works ?

[augustinbz]

i hear also scania is no good

[atomiczen]

Thanks !
has you try any other module that works ?
minchion mandami un pm se ti servono info

[gizmo666]

I have tested for scania and volvo, i buy from ecutool and they dont work! 100% faulty products...they promise to me sort this out but lets see how it goes:)
I report results later.

[zsoltika]

Hi!

AdBlue emulator box (http://diagnostic55.com/adblue.php)

Test on IVECO, VOLVO, DAF!
Work perfect, easy install!

BR!

zsolt

[tecno321]

Works good on 105 460 euro 4?

[autobamm]

tecno321 which one works good? chinese version or diag55 version?

[atomiczen]

tecno321 which one works good? chinese version or diag55 version?
diag55 version

[viorelcarl]

And i bought from china and tested ... not work ... the green led is off the the red led is on (waiting for self lerning ) ,,,, i want if somebody have the software for programing adblue emulator to try to erase and programing again

[atomiczen]

And i bought from china and tested ... not work ... the green led is off the the red led is on (waiting for self lerning ) ,,,, i want if somebody have the software for programing adblue emulator to try to erase and programing again
there's no software and no usb connector, so no way to make it work

[garryreed]

tried on volvo havent had any luck yet

[atomiczen]

someone could share software for inizialize the right truck into adblue emulator?

[gizmo666]

maybe there is way to get these work if we can add usb port so we can program at90can128?

[atomiczen]

maybe there is way to get these work if we can add usb port so we can program at90can128?
could be a way to make it work

[atomiczen]

noone have the software?

[gizmo666]

i have the software but i am on the holiday this week, i can post it to next week.

[atomiczen]

i have the software but i am on the holiday this week, i can post it to next week.

thanks, i'll wait your news

[zsoltika]

Sorry, i'm was busy, there is the sw!

regards!

zsolt

[zsoltika]

This is the sw without pw protected!

BR!

zsolt

[atomiczen]

This is the sw without pw protected!

BR!

zsolt
thanks a lot
could you give me the pass for the first zip file?

[ee28]

i have daf emulator chinesse and not run, any solution ??

not led green on, not learning

[atomiczen]

both these boards don't work
one have a 8 pins connector and one have mini usb

[mufti]

Did you got it ? report please !!

So! Today i tried on 2 trucks - IVECO STRALIS 2008 two pieces of chinese emu NO SUCCESS!!! Fu..ing shits!!! I tried diag55 emu and works on both trucks fine!!!

But be carefull, NOX sensor must be OK, because this one is controlled by EDC via CAN, not by adblue unit!!!

[ee28]

any solution for chinesse adblue ??

[tech12]

Did someone bought adblue emulator from diagnostic55 ? Does It work?

[zsoltika]

I bought 10 pc, work perfect!

[tech12]

I bought 10 pc, work perfect!
But the installation is the same on all truck ...IVECO ,MAN....!!

[tech12]

I bought 10 pc, work perfect!
But to install it on Iveco Stralis i must connect box emulator to body computer's CAN H and CAN L or to Ad BLUE original module' s CAN H - CANL ? If i must connect to CAN H and CAN L of adblueoriginal module, ,where is it ?

[tech12]

nobody know how install this box emulator?

[zsoltika]

connect the box to the can network.if you learn the box, swithc off the original adblue ecu.
the instruction is good, i test it!

zsolt

[tech12]

yes, but where is the original adblue module on iveco stralis to connect the emulator box?

[zsoltika]

behind the engine

[tech12]

behind the engine

But have you ever installed this box on iveco stralis ?
Have you connect this box to original adblue module or to another unit ?

[caaltu]

you dont must connected directly to the module adblue, seeking the cables in the truck.

I have somme modules from diag55 installed, works all perfect:thefinger:

[tech12]

you dont must connected directly to the module adblue, seeking the cables in the truck.

I have somme modules from diag55 installed, works all perfect:thefinger:

But this cable Can H and Can L come from the original unit adblue?

[chiptorque]

sorry for the inconvenience, but one with the manual or cd emulator good?
diag55 there is also that of China but I guess with better quality. only to compare several manuals.
thanks and regards.

[gznide]

So! Today i tried on 2 trucks - IVECO STRALIS 2008 two pieces of chinese emu NO SUCCESS!!! Fu..ing shits!!! I tried diag55 emu and works on both trucks fine!!!

But be carefull, NOX sensor must be OK, because this one is controlled by EDC via CAN, not by adblue unit!!!

Hello,

Which emulator is controled by edc can, the Diag55 or the other chinese emulator. Does the Diag55 emulator work if the NOx sensor is faulty?

Thank you

[tecno321]

connect the box to the can network.if you learn the box, swithc off the original adblue ecu.
the instruction is good, i test it!

zsolt
Hi. In daf 105.460 if you put on the fuse of adblue, the adblue system works normally? Or continue OFF?

I bought one from 1000? at my country because I don"t know about this box from diag55, but I have more trucks and if this work with the same type, I want some of them.

My box:

[dimitar22]

I have heard that ad blue has to work without any faults in order this adblue emulator to work.
Is it true that if original adblue is not working this emulator will not work.

[scs-mem]

Yes,
need to learn the emulator with adblue,with the system without fault.

[zsoltika]

Hi. In daf 105.460 if you put on the fuse of adblue, the adblue system works normally? Or continue OFF?

I bought one from 1000? at my country because I don"t know about this box from diag55, but I have more trucks and if this work with the same type, I want some of them.

My box:

I think, this is not from diag55.

[jaxone]

What about this ?
Anyone tried it ?

2013 Adblue Emulation Module/Truck Adblue Remove Tool (http://www.chinasinoy.com/wholesale/2013-adblue-emulation-module-truck-adblue-remove-tool-2441.html)

[scs-mem]

I think, this is not from diag55.
This is the first done emulator for adblue

[gizmo666]

have anybody get these chinese emulators to work?

[chiptorque]

a question, to run the emulator to remove the jumper ahy programming? thanks

[abmoughit]

dont work! 100%

[chiptorque]

that is exactly what is not working? I do not understand

[zsoltika]

If you like to reset the emulator, switch on the jumper.
Otherwise necessary remove the jumper.

Br!

zsolt

[fred83]

hI, then the news for a good emulator AdBlue?

[atomiczen]

Yes,
need to learn the emulator with adblue,with the system without fault.
Not true. If you program a good working emulator with a learning from a working truck you can make it work on a faulty truck also.
tested 100% by me

[gizmo666]

Not true. If you program a good working emulator with a learning from a working truck you can make it work on a faulty truck also.
tested 100% by me

Yes this is true.. its enough if adblue system sends can messages right but if your original adblue system is totally dead then you have problems:(

[mdanilo]

This is the sw without pw protected!

BR!

zsolt

Please send me ept file.Thank you.

Rgds.,
Danilo

[zafer71]

i use the china emulator no working ..china product bad..

[minchion]

i use the china emulator no working ..china product bad..
where did you buy it from ?
it can help knowing what seller and what type of tool is not working !

[popescovici11]

i think all emulators are from same factory....
ecutool just announce that they improve their emulators...
anyone tested 7 in 1 emulators?

[diagman]

tested china shi..t emulators , not working , wasting money !!!!!!!!

[elchip]

First at all china 7 in 1 work good.
If you do not know how to assemble and condition must be on truck then do not use them.
I am not from china and I not resale them but I was used a lot and every 7 in 1 work OK...

Regard's

[darkthrone]

I have software solution to remove torque reduction for volvo trucks.

[troy5]

I tried to volvo chinese emulator but does not work, only the red LEDS, fails to light up on the green LED

[troy5]

I need to install and emulator Adblue in volvo truck euro 4/5 has anyone tried the emulator adblue v2 of teh page that is discussed in diagnostic55 here?
or you advise the new VR module, please someone who has tried it is not wrong in the model to be installed

[hercamp]

hi , dkrs have anyone try to read with galleto for adblue off???