View Full Version : Y20DTH egr off
ivica
5th November, 2012, 08:11 PM
is it posible Y20DTH egr off ?
regards
Ivica
LaraVAG
5th November, 2012, 10:27 PM
no problem with this engine
mbtun
5th November, 2012, 10:29 PM
Raise EGR map and DTC related to EGR and you are good to go.
ivica
6th November, 2012, 03:17 AM
which tool reads psg16 because the map is in psg16 write ?
mbtun
6th November, 2012, 03:57 AM
No tool can read directly from the ECU.
antibisic
6th November, 2012, 10:01 AM
No tool can read directly from the ECU.
I have now the same problem and I think that Tech2 can read only
LaraVAG
6th November, 2012, 11:06 AM
Tech2 can do that job, many times done, connect to car, download file from server, copy to card, modificate with winols, write, and car done.
Tibutin
29th April, 2013, 04:50 PM
Hi,
Can you send the file? or attach in the reply.
Thanks,
T
mbtun
29th April, 2013, 06:10 PM
attach what file? you go through SPS procedure by tech2 to get the file from database for each car... what is it not clear?
mishu_b
29th April, 2013, 08:19 PM
Hi,
Can you send the file? or attach in the reply.
Thanks,
T
what to attache - 32MB content of the card?
kardi78
21st July, 2014, 09:50 PM
Hi LaraVag.
I need some help, I want to do EGR off in Y20dth psg16 pump. Zafira A, 2004 year
I downloded software by tech2 of ( Global TIS ) SPS, just do not know which part should be copied to the Tech2 card. I attached complete PCMCI tech2 card dump.
Can you help me?
Thank you in advance.
bobolin4o
22nd July, 2014, 10:00 AM
The ECU bin file is between addresses 1500000 and 15FFFF0 of the memory card.
Cheers!
kardi78
22nd July, 2014, 02:26 PM
The ECU bin file is between addresses 1500000 and 15FFFF0 of the memory card.
Cheers!
Thank you for your answer.
I cut this part, I gave 1.00mb file.
This good?
bobolin4o
22nd July, 2014, 03:46 PM
Thank you for your answer.
I cut this part, I gave 1.00mb file.
This good?
Yes, it is ok...
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.