FY800HD

[jatrophaseed]

For those FY800HD with only green lite appears but cant boot up, just replace the 2 pc of MP1482ds or es. I heard some bros paid as much as $80+ for that repair on a crap box. My sympathy.

Pls dont PM me for repair as I m really really very old and cant do sophisticated work. Just try my suggestion, I wont lead u astray.

[uu161]

that is power ic right?

[jatrophaseed]

Yes, if u measure the 3.3v and 1.8v(1117@1.8 side n center pin), u will find it missing, so it the power chip thats faulty for the boot-sector. One poor uncle show me his bill and I was shocku ne. So ex just bcos he bot his box 1yr+ ago for $400???? Poor soul. I wonder why some repairman is so nasty. Cost of a compatible equivalent is abt SGD75 only in China and better quality too.

Sorry, if box boot but no chn appear or seems inactive with selected chn, it the other power chip also 1482. So suggest just replace both to save time opening up the box again.


that is power ic right?

[uu161]

Yes, if u measure the 3.3v and 1.8v(1117@1.8 side n center pin), u will find it missing, so it the power chip thats faulty for the boot-sector. One poor uncle show me his bill and I was shocku ne. So ex just bcos he bot his box 1yr+ ago for $400???? Poor soul. I wonder why some repairman is so nasty.

oic

pity that uncle

--------------------------------------------
is not hard to diy 8 pin ic for those who to try.
u would save at least $70

thank you master jatrophaseed great post :beerglass:

[jatrophaseed]

Yes, in SimLim Tower from Dav Jones (Liu Chen), it only abt $2.00 each loose, ofcos 100pc or more will get her to discount.



oic
pity that uncle
chip itself cost a $1.00 or less :beheaded:
it easy diy 8 pin ic

[exclaim]

Hi jatrophaseed (http://www.digital-kaos.co.uk/forums/members/167002-jatrophaseed/)

I'm getting 1x green LED and can't boot up.
My box is the FYHD800C-II.
You mention to replace the 2x MP1482ds or es (i'm assuming these are power IC chips) I'm not electrical or Electronic trained so i'm really need some help here.

I opened up my box at the power broad area, i can't seems to find those 2 IC chips at least with that model number you mention.

I only found 3 IC chips
8-pin 0B2358AP
4-PIN 1125B (ORIENT 817C)
2-PIN 1009 (KA 432AZ)

Attached are the images.

[DBTraitor]

After you post the picture, I am now even more determine not to buy FY boxes... :)

[jatrophaseed]

Yrs is CII and not d HD800C, but same power supply wud not kick-start theory.
FY problem r, 1117 and that 1482 or equivalent and their cheapo power-pack.
1117 a 100uf x pin2 and 3
1482 juz change them.
All on the main Mobo not the power-pack side.

No use talking to Dav Jones, they no more repairing as the Chinaman gone home for good.



Hi jatrophaseed (http://www.digital-kaos.co.uk/forums/members/167002-jatrophaseed/)

I'm getting 1x green LED and can't boot up.
My box is the FYHD800C-II.
You mention to replace the 2x MP1482ds or es (i'm assuming these are power IC chips) I'm not electrical or Electronic trained so i'm really need some help here.

I opened up my box at the power broad area, i can't seems to find those 2 IC chips at least with that model number you mention.

I only found 3 IC chips
8-pin 0B2358AP
4-PIN 1125B (ORIENT 817C)
2-PIN 1009 (KA 432AZ)

Attached are the images.

[exclaim]

Hi jatrophaseed

I found the 2x MP1482ES, AMS1117 3.3 and LM1117 1.8 on the main-board.

Will be heading down to Sim Lim tower tomorrow to get the components and DIY on the replacement.
Hopefully after replacing it will work.

Will update if it is successful or failure.

Thanks for the guidance.

[jatrophaseed]

Replace only the 2 pc 1482 1st as thet r the most common calprit. DS or ES r both ok.
1117 3.3volt and 1.8 volt no need to change, juz put a 100uf (10v) across center pin and Ground (GND).


Hi jatrophaseed

I found the 2x MP1482ES, AMS1117 3.3 and LM1117 1.8 on the main-board.

Will be heading down to Sim Lim tower tomorrow to get the components and DIY on the replacement.
Hopefully after replacing it will work.

Will update if it is successful or failure.

Thanks for the guidance.

[neb04]

Hi Jatrophaseed,

I have a HD800C-II unit. I cannot get component output signal from it.

Can you advise, please? Thanks.

[jatrophaseed]

Hi Jatrophaseed,

I have a HD800C-II unit. I cannot get component output signal from it.

Can you advise, please? Thanks.

See if yr HDMI is working. If HDMI worked. (sorry for the high lite, some cannot see what I posted). 17-1-13 edited.
replace FL128, chip next to the composite connector socket.

If HDMI dont work, something wrong with the Box software. I dont hv the sw so u hv to asked DragonHead.

[crap80]

Hi jatrophaseed

I found the 2x MP1482ES, AMS1117 3.3 and LM1117 1.8 on the main-board.

Will be heading down to Sim Lim tower tomorrow to get the components and DIY on the replacement.
Hopefully after replacing it will work.

Will update if it is successful or failure.

Thanks for the guidance.

Hi, can post a pic on where these 2 IC chips ar located?
simple plug and play? as in still have need for soldering etc?
Thanks in advance

[neb04]

See if yr HDMI is working. If HDMI worked.
replace FL128, chip next to the composite connector socket.

If HDMI dont work, something wrong with the Box software. I dont hv the sw so u hv to asked DragonHead.

Many thanks for your advice, Jatro.

HDMI and composite are working, so looks like software is ok. I shall go shopping for a new FL128 for my 2 boxes.

[exclaim]

Hi, can post a pic on where these 2 IC chips ar located?
simple plug and play? as in still have need for soldering etc?
Thanks in advance

Hi Crap80

Yes, you need to remove and resolder the chip.
But the problem is i have replaced 2x MP1482ES, AMS1117 3.3 and AMS1117 1.8. My box still failed to boot. Not sure Jatrophaseed have any other solution, i really hope it is not software issue, else it's really goodbye to to my box.

Attached it the image of the location of the chips.

[crap80]

thanks man.. opened my box to take a look but i'm not so technically inclined to solder.
Was touching the two chips with my magnetised screwdriver set and since i can't do anything, just on the set.. then surprisingly it works.

I off the mains yesterday and back to same prob of not being able to boot.

Give up.. time to get another box and make/model

[jatrophaseed]

From what u posted, it now back to the Power board, change all the capacitor wont cost more than $5 and it shud worked.

Hv u add 2 cap 100uf to the 1117 3.3v and 1.8v? Usually this may kick boot the box!

The Chinese capacitors r very bad quality always not enuf kick to boot the box that Y it hangs at 'start' but not booting. This is easy, jus change the 5 pc Big capacitors, I shall attach a jpg later to show what I did to the Power board. It looks very layman but s long s it works, i dont complain. My camera battery low, sori. Later pls.

Yes, cardless box r ok but it SW change u may hv to change box if no SW update avlb, whereas with card, u jus change card instead of the whole box. FYHD always hv some chns missing with their cardless model. The earlier model with card, it dont hv this problem. Oh, 1 more thing, many FYHD box wont auto update keys, depends on where the supply comes from. At moment no problem is bcos SH didnt change keys for 25months liao.

@2015hr juz change the cap with marker dot in attached jpg.

[exclaim]

Hi jatrophaseed (http://www.digital-kaos.co.uk/forums/members/167002-jatrophaseed/)

Thanks for the info, I will try to change the capacitors too.
Anyway how do you add 2 cap 100uf to the 1117 3.3v and 1.8v?

[neb04]

See if yr HDMI is working. If HDMI worked.
replace FL128, chip next to the composite connector socket.

If HDMI dont work, something wrong with the Box software. I dont hv the sw so u hv to asked DragonHead.

Hi Jatro,

I went looking for the FL128 chip today and was told not to waste my time. It seems that the component output sockets on my HD800C-II box are dummies and do not output any signal. Is this true?

[jatrophaseed]

It isnt a dummy, f... him.
It output for RCA n component. If u used only hdmi, this chip ' may not ' b necesary. If yr box can hv RCA signal but not hdmi, chk hdmi pin connection to mobo. Seems their soldering not good or loose from to much mishandling of the plug/unplging of cable. Use a x15 loop eye glass to inspect the connection.
Sent from my GT-S5830

[jatrophaseed]

Pls understand if hdmi is ok, disregard this fl128 chip.
If everything dont hv, too bad, suggest u buy new box.
Sent from my GT-S5830

[neb04]

It isnt a dummy, f... him.
It output for RCA n component. If u used only hdmi, this chip ' may not ' b necesary. If yr box can hv RCA signal but not hdmi, chk hdmi pin connection to mobo. Seems their soldering not good or loose from to much mishandling of the plug/unplging of cable. Use a x15 loop eye glass to inspect the connection.
Sent from my GT-S5830


Pls understand if hdmi is ok, disregard this fl128 chip.
If everything dont hv, too bad, suggest u buy new box.
Sent from my GT-S5830

Hi Jatro,

You're right, f...him! I opened up the box and see the component outputs sockets are soldered onto the circuit board, no dummies.

The situation is this -
HDMI output - ok
Composite output - ok
Component outputs - no signal

I don't see any FL128 chip. Only one MX B101931 chip and one 4588D chip near the sockets. Also a FL12.000 and a FL25.000 (crystal oscillators?). See attached photo.

Please advise. Thanks

Update: I tried connecting to the TV again using component. TV screen show "INVALID FORMAT". What does this mean?

[jatrophaseed]

MX ( fl128 equivalent) is d video output chip.
4558 is the audio chip.
4get abt crystal as the box boot worked ok.
Wrong video format is color miss match, i guess yrs may b a Samsung TV, pls chk the red, green & blue + audio red& white is connected accordingly.
I think nothing wrong with yr box, it yr conection!!!
Sent from my GT-S5830

[neb04]

MX ( fl128 equivalent) is d video output chip.
4558 is the audio chip.
4get abt crystal as the box boot worked ok.
Wrong video format is color miss match, i guess yrs may b a Samsung TV, pls chk the red, green & blue + audio red& white is connected accordingly.
I think nothing wrong with yr box, it yr conection!!!
Sent from my GT-S5830

Using LG TV. Double checked connections. All correct, but still getting picture flashing on and off on screen plus INVALID FORMAT message. Picture mostly red and green. BOTH my boxes same result. Connection to BR player no problem. Strange. Maybe wrong circuit wiring in boxes? Or maybe LG TVs don't like boxes, haha.

[jatrophaseed]

R u using a usb to component/composite adaptor to yr TV?

1 way of getting the correct input to component is (1 at a time) :
Green from box to tv component grenn, the TV show Green picture. (dont connect red and blue)
Blue from box to tv component blue, the TV show Blue picture. ( dont connect Green and red)
lastly, Red from box ( make sure it is not the RED from audio) to TV component red, the TV show Red picture.
If not clearly defined, juz toto luck with each color wire, as there r only 3 wires for 3 color, not much variation needed. Juz try this method, probably u may hv mix up the red with audio RED.

[neb04]

R u using a usb to component/composite adaptor to yr TV?

1 way of getting the correct input to component is (1 at a time) :
Green from box to tv component grenn, the TV show Green picture. (dont connect red and blue)
Blue from box to tv component blue, the TV show Blue picture. ( dont connect Green and red)
lastly, Red from box ( make sure it is not the RED from audio) to TV component red, the TV show Red picture.
If not clearly defined, juz toto luck with each color wire, as there r only 3 wires for 3 color, not much variation needed. Juz try this method, probably u may hv mix up the red with audio RED.

Hi Jatro,

Connected as you suggested. Tried an Akira TV as well. No luck.
Pb - no blue picture
Pr - no red picture
Y - got black picture flashing on and off, and not centered on screen.

I think box got problem somewhere.

[janidoods]

where can get this fyhd white? Pm me anyone?

[jatrophaseed]

Sorry I think yr box is no good liao. Accept as it is. Dont waste money as new system is used by 45% of subscriber liao. Most had recvd their N3 card for updating this month for those using DCI model.
Rest of the boxes not upgradable, i think may be......



Hi Jatro,

Connected as you suggested. Tried an Akira TV as well. No luck.
Pb - no blue picture
Pr - no red picture
Y - got black picture flashing on and off, and not centered on screen.

I think box got problem somewhere.

[neb04]

Sorry I think yr box is no good liao. Accept as it is. Dont waste money as new system is used by 45% of subscriber liao. Most had recvd their N3 card for updating this month for those using DCI model.
Rest of the boxes not upgradable, i think may be......

Yea, thanks for your help, Jatro. I think it's a common problem with this box model because I have 2 boxes and both show same problem. Time to change boxes when N3 is implemented.

[pekakbadak15]

where can get this fyhd white? Pm me anyone?

Still want to buy this set after so much of bad review?

[Koonz]

Wholesale fy800hd - Buy Low Price fy800hd Lots on Aliexpress.com (http://www.aliexpress.com/wholesale?SearchText=fy800hd&catId=0&manual=y)

[jatrophaseed]

Wholesale fy800hd - Buy Low Price fy800hd Lots on Aliexpress.com (http://www.aliexpress.com/wholesale?SearchText=fy800hd&catId=0&manual=y)

Good advertiser..

[neb04]

Any idea why no component output for new FY800HD C-IV? Earlier models have it.

[Bomchacha]

According to Supplier in China
Only the latest Fy800HD-VI (Black Color can support N3)
All the white colors and older models cannot

Bad news for all who owns it

[imbadude]

I have a FYHD800 and it was working for a week until all th SH channels are scrambled. :(
Anyone here can help? I tried recanning many times

[Logger]

Good advertiser..
Lolz. Sure a not, it mention will dominate the wholesale TV world. So bold !

(2. The most important: support SN network sharing,support Nagra 3, which is the strongest special features from other machines.
This machine has longer lifetime! ! (After the system upgrades to Nagra 3,it will dominate the wholesale TV world

[SGDVB]

According to Supplier in China
Only the latest Fy800HD-VI (Black Color can support N3)
All the white colors and older models cannot

Bad news for all who owns it

Just my 2 cent worth.

Anyone can say their box can support N3 but to what I know even before N3 start, dreambox are the only one that are N3 compatible (Subjected to descramble solution available).

Those OEM box (i.e: fyhd), it will be useless if they does not come with software upgrade only release by factory & only if they have the solution.

Lastly, dun be cheated by "N3 Supported". This does not mean that you will be able to watch locked channel when N1 signal is switch off. What it mean is when card-share is available (if any), you can pay them monthly subscription in order to view all locked channel. I mean IF card-share is available & no promise there will be any so as good as nothing.

For those having those FYHD, god bless you. I will never buy such box if I'm you.




Sent from my iPhone using Tapatalk 2

[akiden]

Just my 2 cent worth.

Anyone can say their box can support N3 but to what I know even before N3 start, dreambox are the only one that are N3 compatible (Subjected to descramble solution available).

Those OEM box (i.e: fyhd), it will be useless if they does not come with software upgrade only release by factory & only if they have the solution.

Lastly, dun be cheated by "N3 Supported". This does not mean that you will be able to watch locked channel when N1 signal is switch off. What it mean is when card-share is available (if any), you can pay them monthly subscription in order to view all locked channel. I mean IF card-share is available & no promise there will be any so as good as nothing.

For those having those FYHD, god bless you. I will never buy such box if I'm you.




Sent from my iPhone using Tapatalk 2

I like to share my 2 cents worth too.

If ppl are looking to get the maximum $$ out of a black box to be able to do many much more then just tuning in to SH channels then yes I agree the DreamBox's linux open platform can certainly do much more.

But for ppl who just want to be able to tune in to SH channels and do not want to scratch their heads over how to mod images, burn and backup bouquets and just want a simple plug & play receiver, the FYHD is a good option.

Doing a simple browse through this forum and you will be able to spot the fair share of problems DreamBox users encounter too.

BTW for those FYHD users who complain they are missing ESPN sports channels, I'm not surprised they can't find them at all. Because SH has RENAMED ESPN sports channels to FOX SPORTS channels!! As with all systems, half of the problems are always due to user misuse :laugh:

My point is no single system is perfect! But there is a suitable system for every different group of users.

[mafiaprince]

clap clap for u...juz beware big brother is watching keep it low

[Rolloo]

Do you know where to get the FY 800 Hd fixed? I'm also having green light but can't boot up. Soldering it is too technical for me.

[jatrophaseed]

Do you know where to get the FY 800 Hd fixed? I'm also having green light but can't boot up. Soldering it is too technical for me.

There r 2 ic need change. method was posted on page 1. Their Box hv this problem from 1st Gen to the 7th Gen, never solved. But recently, I saw their 8th gen seems to hv a better Power unit. Hope dont hv this problem.

[esakao]

Master Jatrophaseed, my FYHD800C box with green lite but cannot boot up. So I changed the 2 MP1482ES you recommended. Now the boot wordings appear with green lites but the channel selection did not come up. Should I changed the 5 cap you marked? My powerboard looks slightly different from the one you

posted. Pictures attached198321198322198323 TIA

[jatrophaseed]

No, yr box is working. U refresh with "DragonHead" USB firmware which he posted some many mths ago. Then box shud b able o view. Remember, do a scan with only, 394, 458,450 only, he rest of chns r already in liao.
Pls search DragonHead's firmware yrself.

[esakao]

OK I got the link http://www.digital-kaos.co.uk/forums/f34/fy-hd-hd800-c-195345/ (FY.AP). I will try tonight and feedback so that others can share my experience. Thank you, Master Jatrophaseed.

[ultrakiasu]

I helped one elderly guy fixed his hanging FYHD800C.
I just replaced all the electrolytic capacitors, and the unit revived.
Spend about under $20, bought spare capacitor (in bulk - savings).

Maybe you could try this solution.

PS: Electrolytic Capacitor got polarity.. please don't insert pin blindly.

[jatrophaseed]

I agreed with ultrakiasu, the electrolytic caps r a nuisance.

[esakao]

I plugged in the flash drive with the unzipped file FY.AP but no luck. The lite on the flash drive flicker. My TV shows there are output on the HDMI connection (by a darker image) but no picture. The boot wordings with 2 green lites still there. Still no Channel Selection. Any masters out there can advice me what to change/do. Please don't ask me to change to another box. I retired liao and cannot afford to get a new box. TIA.

[Koonz]

china box are very problematic
everytime i buy a box from them, i feel like I am buying a second hand or faulty box to repair myself
Must change here and there... solder etc
:(

[jatrophaseed]

Try update yr box with RCA video bcos the HDMI 19pin connections by FY is real F**K up.


I plugged in the flash drive with the unzipped file FY.AP but no luck. The lite on the flash drive flicker. My TV shows there are output on the HDMI connection (by a darker image) but no picture. The boot wordings with 2 green lites still there. Still no Channel Selection. Any masters out there can advice me what to change/do. Please don't ask me to change to another box. I retired liao and cannot afford to get a new box. TIA.

[esakao]

Tried that also. But still no luck. So near yet so far. RCA connections are active on my TV but no Channel Selection on front panel. Plug in flash drive on both front and back panel but still the same. Look like box really konk out and be dead weight.

[jack_diniro]

Hi All Bros,

I have one of the boxes to try.. But after the loading LED on the box, it shows ASH. Then nothing happens.. Any idea why?

Thanks all! =D

[jatrophaseed]

U plug in the USB into the front USD input. Switch off from Mains 220v supply. Press 'Menu' dont let go, now on the mains and see LED show activities, let go 'menu' button and wait patiently until box reboot.


Tried that also. But still no luck. So near yet so far. RCA connections are active on my TV but no Channel Selection on front panel. Plug in flash drive on both front and back panel but still the same. Look like box really konk out and be dead weight.

[jatrophaseed]

The r many version of FYHD800c, MBHD800C, FYDM800C etc,
1) use method I post above
2) juz plug in USB in front slot, on mains, the 'on' the standby with remote and wait till box reboot.
Pls note the file is abt 6M must wait abt 4min for full flash then reboot, dont unplug b4 reboot. However, can always reflash as the nand dont suffer from corrupted failure. ie, u can flash as many times as u like, the flash will not be dead.

[jack_diniro]

Any bros came across this problem before? Thanks!


Hi All Bros,

I have one of the boxes to try.. But after the loading LED on the box, it shows ASH. Then nothing happens.. Any idea why?

Thanks all! =D

[jatrophaseed]

Any bros came across this problem before? Thanks!

i think sometin on mobo shorted. i tried many variation but cant get a #*

Sent from my GT-I9100 using Tapatalk 2

[CyberTron88]

I have a fyhd 800c vii, and suddenly it is not able to boot. Tried putting a thumbdrive in the usb port, does not seem to read the usb. Can't seem to find the 2 chip on my box too. The whole box come with only 1 single pcb, and closest chip is something like PT1203SC or something like that.

Can someone help me replace the power ic?

Thanks

[CyberTron88]

hmm...spend some time troubleshooting... i observe the following :
1. The box will be startup from cold
2. If you leave it connected, after awhile, it might boot up
3. However, once it boot up, I'm unable to scan any channels.
4. I'm not able to read my usb thumbdrive though the led on my thumbdrive shows there is power.
5. I believe the 2 power IC on my box is PT1203SC.
6. The box seems to run very hot and hang the box.

I suspect is either the 2 power IC problem or the capacitors. I noticed some of the capacitors do not have the solder underneath the pcb. Can these be replaced? Based on what I google, they should be smd style capacitors.

hmm... anyone knows where I can get the power ic and capacitors replaced.

[jatrophaseed]

PT12035SC can buy from Dav Jones SimLim Tower Basemt. The smd electrolytic capacitor replaced with lead capacitor will still work, b very careful with d =/- poles or the oil in cap will boil and explode. After replace, the box booted, then reflash with a thunbdrive with only fy.ap file in the drive, no other files unless yr box can access file menu which able to select fy.ap to flash.

[chrome08]

hi all, just would like to know, cos i purchased the latest FY800HD-VII set top box.
Unable to add in the new channels like Lifetime, Lifetime HD, H2, H2 HD and also TV4Me.
This channels are all in 156.00Mhz frequency with the symbolrate of 6090 (as given by astrobox).
Anyone able to add these channels in the set top box or have any idea how to resolve this?

[pekakbadak15]

hi all, just would like to know, cos i purchased the latest FY800HD-VII set top box.
Unable to add in the new channels like Lifetime, Lifetime HD, H2, H2 HD and also TV4Me.
This channels are all in 156.00Mhz frequency with the symbolrate of 6090 (as given by astrobox).
Anyone able to add these channels in the set top box or have any idea how to resolve this?

Have u try manual scan frequency 157mhz.

[stunner]

U got the white box or black one?heard the white one got no tuner at all.

Sent from my GT-N7102 using Tapatalk 2

[jatrophaseed]

The Vii outside is a poor indication of the mobo version. If your 'Chn search' is 3 digits, chances r no, you cannot get 156.5Mhz but TV4$ME is ok, search for the freq.
If your 'Chn search' is 6digit, ( new small digi-tuner) this type box can rcvd 156.5Mhz. h2,h2 hd. lifetime and lifetime hd. I heard a new fw is coming out soon, perhaps you contact your supplier for new fw upgrade??
Dont PM me, I am not related with them.

Pls also note these boxes' RJ45 are not connected, so it is a doorstop when N3 comes. Info i suggested are for your own reveal, many tawkays noobies dont care about changing boxes every few months, i was told straight in the face. Decision at your discretion.
I always pre-empt any new changes.


hi all, just would like to know, cos i purchased the latest FY800HD-VII set top box.
Unable to add in the new channels like Lifetime, Lifetime HD, H2, H2 HD and also TV4Me.
This channels are all in 156.00Mhz frequency with the symbolrate of 6090 (as given by astrobox).
Anyone able to add these channels in the set top box or have any idea how to resolve this?

[jatrophaseed]

Can you pls elaborate? some jpg to support your hear-say?


U got the white box or black one?heard the white one got no tuner at all.

Sent from my GT-N7102 using Tapatalk 2

[stunner]

I'm on black fy800HD unless I could open up my friend's white box if not I couldn't post the jpg here.maybe some senior here will know about this more.

Sent from my GT-N7102 using Tapatalk 2

[chrome08]

Have u try manual scan frequency 157mhz.

yup tried 156 and also 157, still cannot.

[chrome08]

U got the white box or black one?heard the white one got no tuner at all.

Sent from my GT-N7102 using Tapatalk 2

I go the latest small black colour one, which is about the size of the palm....
something like this
205485

[chrome08]

The Vii outside is a poor indication of the mobo version. If your 'Chn search' is 3 digits, chances r no, you cannot get 156.5Mhz but TV4$ME is ok, search for the freq.
If your 'Chn search' is 6digit, ( new small digi-tuner) this type box can rcvd 156.5Mhz. h2,h2 hd. lifetime and lifetime hd. I heard a new fw is coming out soon, perhaps you contact your supplier for new fw upgrade??
Dont PM me, I am not related with them.

Pls also note these boxes' RJ45 are not connected, so it is a doorstop when N3 comes. Info i suggested are for your own reveal, many tawkays noobies dont care about changing boxes every few months, i was told straight in the face. Decision at your discretion.
I always pre-empt any new changes.


you are right, the channel search is 3 digit only, no chance of putting in the .5 mhz, maybe thats why can't search for the channel, also, can i just ask, what do you mean by "doorstop when N3 comes"?
I have been trying to contact my supplier for FW upgrade for days, still awaiting response

[pekakbadak15]

you are right, the channel search is 3 digit only, no chance of putting in the .5 mhz, maybe thats why can't search for the channel, also, can i just ask, what do you mean by "doorstop when N3 comes"?
I have been trying to contact my supplier for FW upgrade for days, still awaiting response
Simple term is the box will become useless. The supplier can claim that their fy box will work on n3 but has it been tested? Even their autoroll function was not put to the test yet.

[jatrophaseed]

@ P15, yes, u r right, their AU roll is not tested. N3 some models had bn tested but 95% of their boxes are NOT usable in N3 new system share. The box will not work independently. Pls read up on Nagra3 system sharing and get a 1st hand knowledge of what is to come. My personal suggestion is a small group ~~~~. Dont depend on market uploader.

[Polluxti]

Seems this FYHD thread is the most subscribe.. anyway, I was pondering over which dreambox to get and came to a decision to get the DM800HD-SE but with N3 in the works, I went for the FYHD800 VII because it is too bloody cheap for the price on a HD set compared to the 800se.. and asking the old birds here for directions where to buy the box seem to go nowhere as it's probably sensitive..

My opinions on the box? The FYHD is really a good budget box. It appears to be a touch slower compared to a friend's DM500C box and the SH default stb. The interface still loses out to those by Dreambox, but it's HD resolution is great and the tuner seems to acquire the signal better than dreambox, although this is just an impression as I haven't and don't intend to test the 2 units side by side as the boxes are at different places (mine and a friends).

Unfortunately, the tuner doesn't have the .5hz searching function so h2 and the other newer channels are no go but it's not a deal breaker for me as I have a SH set top box in the main living room. (using it as a spare for bedroom viewing before sleeping).
(UPDATE 22Aug2013: the new firmware is out and I can now receive these new channels no problem, link is in post #273 (http://www.digital-kaos.co.uk/forums/f34/fy800hd-302337/index19.html#post2068869))

I have read thru the cons of the FYHD boxes, and these version may have addressed them. The previous box suffered from a poor PSU design within the box and they have mitigated this by using a external power adapter instead. I haven't tested if the ethernet is connected anot but looking at the interface of the box, it doesn't appear to have any network function but I'm not aware how it usually works as it's my first time using such a stb.. there are USB ports and there is an option to use a USB wireless adapter so MAYBE it can have a wifi function but I haven't looked into it either..

Firmware update appears to be done only via USB so it appears there's no way for user updating so be aware where you buy the set from as the firmware upgrade needs to be compiled by the factory so YMMV with any of the supplier..
All in, I can't complain for the price since I can watch alot of channels already for a auxiliary room box..

[Polluxti]

Got a reply from the source I enquired about the newer h2 frequencies


If manual search no help, have to wait for next upgrade software. If you need to get more channels,i suggest you buy DM800HD or DM800SE.
(UPDATE 22Aug2013: the new firmware is out and I can now receive these new channels no problem, link is in post #273 (http://www.digital-kaos.co.uk/forums/f34/fy800hd-302337/index19.html#post2068869))

[8allan5]

Hi bros... I have a white hd800-e... it keep auto reboot after some time... any1 know how to resolve? Thanks!

[chrome08]

Hi bros... I have a white hd800-e... it keep auto reboot after some time... any1 know how to resolve? Thanks!

i think its the firmware issue. Might wanna get the firmware from the supplier and reflash it.

[denverp]

Can one download the FYHD800C VII firmware from somewhere? Iin case of need to reload the firmware.

[jatrophaseed]

Refer to link with update:

http://www.digital-kaos.co.uk/forums/f34/dm802se-latest-dreambox-wannabe-clone-hd-box-344158/index2.html#post2031447

[num3000]

Dear master JD

Can this firmware be use on fyhd800 III?

This is the 1st hd box from fy which I got.

Please advise

Many thanks

[jatrophaseed]

Yes it can be used. Put into USB and load from Menu setup, search the file, press ok, ok manual updat press update. Too many versions, I don't know their marketing model nor but jus put to Manual update shudder b ok.

[psytoburnies]

Hi guys,

Is there any difference between the FY800 HD sets, e.g. FY HD800C VII, FYHDc -e? I know there are some differences in the set top box itself, like white and black colour. But otherwise, is there a difference in the internals?

Thanks!

[Bomchacha]

China side likes to create awareness by playing with the numbers just to get more sales.
Very unethical. Any minor changes to the firmware, they will release as a new version. But everything is still the same. It may look a little diff.

What I see so far

FY800HD
FY800HD - II
FY800HD - III
FY800HD - IV
FY800HD - V
FY800HD - VI
FY800HD - VII
FY800HD - VIII
FY800HD - e
MVHD800
HDC888

[num3000]

Yes it can be used. Put into USB and load from Menu setup, search the file, press ok, ok manual updat press update. Too many versions, I don't know their marketing model nor but jus put to Manual update shudder b ok.

Thank you sir!

[1inuyasha]

Yes it can be used. Put into USB and load from Menu setup, search the file, press ok, ok manual updat press update. Too many versions, I don't know their marketing model nor but jus put to Manual update shudder b ok.

Thanks alot can now watch new channels

[jatrophaseed]

I hope to get the latest bouquet update with the 19yh July's 5 HD chn asap. Keep tuned in.

[Bomchacha]

Its good to see that Master and Seniors provide some form of support for the FY boxes here
Otherwise the FY box users here has no one to turn to when problem arises

Upzzzz

[Polluxti]

Hopefully can see new firmware up.. at the moment master J's firmware listed here (http://www.digital-kaos.co.uk/forums/f34/dm802se-latest-dreambox-wannabe-clone-hd-box-344158/index2.html#post2031447) should be the latest. I understand from my supplier that white and black fyhd boxes has different firmware..
the black fyhd firmware is attached for those who needs a backup. note that it's the default firmware of the box I have.. it's indicated sw version 100 so you can go into your box menu to see what version you have..

still waiting for new firmware updates..

[1inuyasha]

have tried both v100 and the one jatrophaseed have uploaded which is v2.1
v100 looks more sleek but can't tune to the latest channels, for v2.1 looks the same as v1.0 but can tune to the new channels

[lAwBoY]

How do i upgrade the firmware?
I insert the thumbdrive into the setup box and select upgrade usb.
The setup box did a reboot that all.

Did i miss out on any step?

-------------------

Rename the unzipped files to upgrade.bin
and Flashed via USB thumbdrive.

[lAwBoY]

Hi all, i did a manual search n all my channels are messed up.
Can anyone please guide me how to i recover the starhub channels listing?
what frequency should i use?

[nelsonhtb]

Hi all, i did a manual search n all my channels are messed up.
Can anyone please guide me how to i recover the starhub channels listing?
what frequency should i use?

Did the channels mess up after you upgraded firmware?
If yes, when first startup did you choose Country = Hong Kong?
Reinstall firmware and during first startup choose Hong Kong and rescan channels.
Channel sort = By LCN

[lAwBoY]

Did the channels mess up after you upgraded firmware?
If yes, when first startup did you choose Country = Hong Kong?
Reinstall firmware and during first startup choose Hong Kong and rescan channels.
Channel sort = By LCN

i did not manage to upgrade the software.
I manage to get back most of the channels after i did the auto scan.
Thanks bro.

[Polluxti]

have tried both v100 and the one jatrophaseed have uploaded which is v2.1
v100 looks more sleek but tune to the latest channels, for v2.1 looks the same as v1.0 but can tune to the new channels

You are using which fy box? Black or white?



Sent from my Mobile on Tapatalk.

[blackiez]

anyone able to see the EPG in their FY800HD box?

[denverp]

HD800C-VII box, v100 upgraded to v2.1.
results:
- better UI but 90% similar controls,
- new HD channels,
- lost Eurosport channels,
- EPG cannot be seen,
- feels that response is faster

[mq2012]

are all channel number in order?

[kerorozu85]

is the firmware a go for black fhyd?

[1inuyasha]

You are using which fy box? Black or white?



Sent from my Mobile Command Centre on Tapatalk.

i am using white but both firmware can be used

[jerjan]

Any FYHD white or black can see all 226-233 ?

[1q2a3c]

Any FYHD white or black can see all 226-233 ?

Just updated. New HD channels are available. But anyone manage to find a way around BPL channel?

[1q2a3c]

Guys I found this not sure if its of any help. *********. The first link is dated 20/7/13 which is the lastest FYHD update. But im not sure if it is applicable for all version. But I do believe that that 2nd link dated 17july which is posted by jatrophaseed http://www.digital-kaos.co.uk/forums/f34/dm802se-latest-dreambox-wannabe-clone-hd-box-344158/index2.html. that link is supposed for the model FYHD MVD. But apparently according to a few and myself, the 2nd link update works for FYHD 800c vii, does include new channels but not BPL. Anyone has a spare console or would like to play around with the FIRST link? might have updates on BPL or something. That im not sure, thus need some guru to double confirm.

[sotong]

help needed,anyone ever encounter got pictures no sound after installation.Is there any setting need to be done to my TV or box ? TIA...am using FYHD 800c vii on a Panasonic Plasma TH-P42A2S..but when i tested on my friend TV everything works perfectly .

[micromouse]

222222222222222222222222222

[1q2a3c]

are you another one who doesn't think before they type? is it just me or this forum filled with angst personel. Obviously there is no fy forum thus the fy user came over here. the fy thread has been dated since few years back. So whats your point exactly by stating such a statement now? by proving your idiocy?

[gmb45]

:rulez:

as theres no fy forum perhaps start a thread in the general cable tv forum then if it gets used it can be stickied.

[jatrophaseed]

Dear beloved Brothers, Please note that I am not uploading anymor FY files. Personal reason.
Dear Admin, pls close this thread if possible.

[SGDVB]

are you another one who doesn't think before they type? is it just me or this forum filled with angst personel. Obviously there is no fy forum thus the fy user came over here. the fy thread has been dated since few years back. So whats your point exactly by stating such a statement now? by proving your idiocy?

No FY forum???

Maybe I'm outdated but I think I ever come across one but just not active.


*****************************************
Sent from my iPhone using Tapatalk

[jatrophaseed]

Master SGDVB, FY site it is still there, they juz lazy to search.
I no more support FY boxes.

Thanks Mmouse, I try not 2b conservative but some PMs really make my day.
However,this my last posting of update for FYHD800C and TNHD888 (both can use),juz to show my sincerity to some good friendly Brothers' need.

Attachment deleted, Sorry. (9-8-13) Personal reason.

[micromouse]

222222222222222222222222222

[jatrophaseed]

Thanks Master Micromouse for your support.

[moronicgenius]

hi all DK veterans, I know this forum is for DB and all these FYHD boxes are just dummy version of it. but many of us FYHD box users are not tech incline and only just wanna watch free tv (cheapo:joyous:). when we faced with tech issues I hope veterans here can continue to support this thread and just help us where possible. many thanks.

[xodren]

just bought two sets of FYHD VII and saw this thread...:(

[SGDVB]

just bought two sets of FYHD VII and saw this thread...:(

Must say... Good luck.

Pray hard that the box can still be use like it promised (N3 supported).

Like I said before, the ethernet port for certain batch of the FYHD box have been deactivated on purpose so u have to buy new box when the time come if Cs is require.


*****************************************
Sent from my iPhone using Tapatalk

[ronny1]

Must say... Good luck.

Pray hard that the box can still be use like it promised (N3 supported).

Like I said before, the ethernet port for certain batch of the FYHD box have been deactivated on purpose so u have to buy new box when the time come if Cs is require.


*****************************************
Sent from my iPhone using Tapatalk

Wah Sian! i also just buy this FYHD then i saw this forum. decides to check it out. sian sian sian bad news.
I also realised i cant get any of those new channel like tv4me, lifetime, H2. I did however saw a thread on updating the firmware. will give it a try and update :D

[hancj]

:thumbup::thumbup::thumbup:Save your effort for preparation of N3... I will find time next week to go find you...

Hi Micromouse and all the Masters, please do continue to support it as many of us newbies .. still in great need for it ...
thanks all of u for a great support and hope we (newbies) can still have ur support.

[syazaqil]

For FYHD user... click this link to update your firmware..Lastest Firmware for MVHD/FYHD/TNHD white and black box (http://www.singapore-dreambox.com/lastest-firmware-for-mvhd-fyhd-tnhd-white-and-black-box/)

[ronny1]

For FYHD user... click this link to update your firmware..Lastest Firmware for MVHD/FYHD/TNHD white and black box (http://www.singapore-dreambox.com/lastest-firmware-for-mvhd-fyhd-tnhd-white-and-black-box/)

harlow brother. you using what model ah?
and which file you download ah?
i download jathro firmware upgrade in page 7 of this thread.
but then hor i only got 229 and 230 working. the rest of the channel my FYHD 800 black box cannot receive. haha

[Pokemon999]

harlow brother. you using what model ah?
and which file you download ah?
i download jathro firmware upgrade in page 7 of this thread.
but then hor i only got 229 and 230 working. the rest of the channel my FYHD 800 black box cannot receive. haha

Hi Ronny,
I am thinking of doing the upgrade to my white box. Did you manage to get back the rest of the channels?

[xodren]

harlow brother. you using what model ah?
and which file you download ah?
i download jathro firmware upgrade in page 7 of this thread.
but then hor i only got 229 and 230 working. the rest of the channel my FYHD 800 black box cannot receive. haha


same...managed to get those BPL channels working but not all

[ronny1]

same...managed to get those BPL channels working but not all
bro which channel you get?

[xodren]

bro which channel you get?

229,230,231,234

[ronny1]

229,230,231,234

may i know which box you are using? FYHD black/white or the MVHD?
and you use which firmware update? jathro one or website or your own source?
I also got 229 230 231 :/.
234 is no epl i think haha

[xodren]

may i know which box you are using? FYHD black/white or the MVHD?
and you use which firmware update? jathro one or website or your own source?
I also got 229 230 231 :/.
234 is no epl i think haha

jatrophaseed (http://www.digital-kaos.co.uk/forums/members/167002-jatrophaseed/) bro posted a link at bottom of page 7. used that. don't see any newer firmware anywhere else.

[croc]

those with white FYHD.....are you able to get any BXL channels?

with firmware 071713 ? or?

[Pokemon999]

I just upgraded my white FYHD to the one posted by jastro on page 7. Everything works fine now. CH229-231. Excellent support from by jastro. Thank you.

[riozis05]

Master SGDVB, FY site it is still there, they juz lazy to search.
I no more support FY boxes.

Thanks Mmouse, I try not 2b conservative but some PMs really make my day.
However,this my last posting of update for FYHD800C and TNHD888 (both can use),juz to show my sincerity to some good friendly Brothers' need.

Thank you!

[ronny1]

can anyone manage to scan 135.5mhz on FYHD?
my black box return no value leh.
128.5mhz gives me 129, 130, 131.
149.5mhz it says 8 tv found, but it didnt show any more epl channel for me :(
jathro bro any advise?

[ypvs125]

can anyone manage to scan 135.5mhz on FYHD?
my black box return no value leh.
128.5mhz gives me 129, 130, 131.
149.5mhz it says 8 tv found, but it didnt show any more epl channel for me :(
jathro bro any advise?

Have u try with 136 and 150?

[nelsonhtb]

Can rcv no problem.
Did you btw change SR to 6090?
Try again should work if you used latest fw.

Sent from my Nexus S using Tapatalk 2

[ronny1]

Have u try with 136 and 150?

ya i try bro. i try 149.1 all the way to 149.9 and 150
also try 135.1 all the way to 135.9 and 136


Can rcv no problem.
Did you btw change SR to 6090?
Try again should work if you used latest fw.

Sent from my Nexus S using Tapatalk 2

Yes brother i use 6090 all nothing sia. why man :(

[mq2012]

me too with the latest few, fyhd can only tuned to 229,230 and 231. for DM800 with the updated E2 SGSH online bouquets updater plugin for sg from master uu161 can get all 8 channels.

[ultrakiasu]

Once you upgraded the firmware, don't scan manually.
Do a factory reset, and upon the language setting page, just do a blind full scan.. and wait..
(press ok ok ok ok.. all the way.. no need key in anything...)

It worked for me...

[mq2012]

Thanks for the info, anyway follow your method still don't work for me :( only the same 3 channels.

[SGDVB]

me too with the latest few, fyhd can only tuned to 229,230 and 231. for DM800 with the updated E2 SGSH online bouquets updater plugin for sg from master uu161 can get all 8 channels.

This is the disadvantage with the FYHD, MVHD, TNHD or watever XXHD they call them b'cos the channel were found as data instead of tv profile when scan.

For dreambox, the brother here who provide the bouquet or updates used dreamboxedit to change it from data to tv.

There are many software to support dreambox unlike those oem boxes will have to wait for official firmware updates from the manufacturer.

Those who have tried using dreamboxedit or dreamup will understand wat I'm trying to say here.

I'm oso not saying the dreambox is good or powerful or trying to put other boxes down. Juz my 2 cents worth. Dreambox recently oso have many problem itself due to component discontinued therefore the maker are using china oem part to substitute resulting all the problem like image drop or weaker signal.

Hope my comments does not offend any trader here.


*****************************************
Sent from my iPhone using Tapatalk

[jatrophaseed]

Something b4 I go on leave.
What ever box need from now pls choose those which full digital tuners, yhose Bros cant get chn r those tuner with the Fconnect and TV connecter further apart than 10mm, thats bcos those r the coil tuner with low sensitivity for extreme low or high freq.
I hv posted the type of tuners to look for, pls refer back to many mths ago on jpg of tuners.

Juz my finding, those boxes with Full digi tuner can recvd all 8chn, no proble, including FY boxes. Those not digi tuner, most hv difficulties. No way around xcept by a booster or change box. Last nite all 8 were tested and runs very smoothly, ie, all 8chns r now fully operational, but I still believe they will still increase signal strenght some days later as more subscriber registered.

[fabz87]

Thanks for the info, anyway follow your method still don't work for me :( only the same 3 channels.

Yeap. Same for me. Any gurus can help? :(

[croc]

FYHD Picture - More Detailed Picture about Latest! tnHDC 888 is Singapore HD800C best white box FYHD800C Set Top Box Better than FYHD FYHD800C Picture in Set-top Boxes from BESTBOX (http://www.aliexpress.com/item-img/white-box-FYHD-HDC-800-Singapore-EPG-Network-HD-800C-FYHD800C-Set-Top-Box/595877624.html#)

r u guys talking this box? cos mine is this

[ultrakiasu]

FYHD Picture - More Detailed Picture about Latest! tnHDC 888 is Singapore HD800C best white box FYHD800C Set Top Box Better than FYHD FYHD800C Picture in Set-top Boxes from BESTBOX (http://www.aliexpress.com/item-img/white-box-FYHD-HDC-800-Singapore-EPG-Network-HD-800C-FYHD800C-Set-Top-Box/595877624.html#)

r u guys talking this box? cos mine is this

Obviously you guys not aware there is a even latest newer model from "Tonnow" model tnHDC-999

But owned both models and tested, there is a serious flaw which may be a problem soon.

May avoid getting the model if that important function is not present.

I will be testing the MV HD series next week..

[fabz87]

FYHD Picture - More Detailed Picture about Latest! tnHDC 888 is Singapore HD800C best white box FYHD800C Set Top Box Better than FYHD FYHD800C Picture in Set-top Boxes from BESTBOX (http://www.aliexpress.com/item-img/white-box-FYHD-HDC-800-Singapore-EPG-Network-HD-800C-FYHD800C-Set-Top-Box/595877624.html#)

r u guys talking this box? cos mine is this

Nope. Mine is this: The latest Gen 6 Black FYHD HD800C-VII Starhub cable HD TV receiver in Singapore (http://www.singapore-dreambox.com/fyhd-black-fyhd-hdc-800-vii-hdmi-epg-fyhd800c-singapore-starhub-tv-box/)

[mq2012]

Black FYHD HDC-800-VII and this FYHDC-800-e both the same problem.

[ultrakiasu]

Be careful updating the firmware of HD800C-VII box, I got a friend, flashed until bricked, and no way to get it fixed.

Be absolutely sure the files u obtained is for your model. Few models don't perform hardware check before burning the rom, and u won't be able to boot up later.

[jnashville]

sometimes you may think is brick, but its actually not. for my dm800hd-c, after any flash of any image, i cannot just restart my box. I have to power off my box and remove the power cord to drain out the excess power... den switch it on back. then only it works. if i plug my power cord in and restart, it will nv boot up. always stuck at the dreambox multimedia logo.

[uu161]

sometimes you may think is brick, but its actually not. for my dm800hd-c, after any flash of any image, i cannot just restart my box. I have to power off my box and remove the power cord to drain out the excess power... den switch it on back. then only it works. if i plug my power cord in and restart, it will nv boot up. always stuck at the dreambox multimedia logo.

bro he was taking about FYHD box not dreambox

[jnashville]

bro he was taking about FYHD box not dreambox

oops sorry.

[croc]

i did that and also only 229 ~231 nia....

what abt others? also found out alot of channels distorted

[tammytan]

Master SGDVB, FY site it is still there, they juz lazy to search.
I no more support FY boxes.

Thanks Mmouse, I try not 2b conservative but some PMs really make my day.
However,this my last posting of update for FYHD800C and TNHD888 (both can use),juz to show my sincerity to some good friendly Brothers' need.

Is this firmware for all FYHD800C? I dont even know which version is mine, lol.

Update: The system just show "can not find file" while I try to do software upgrade.

Anyone can help?

[aaronlim]

hi guys,

C for around 4 months

[moronicgenius]

hi aaron how is the quality of kadibo q5? can it scan b p l channels? i'm considering it as its cheaper. pls advice.
hi guys,

noob here, i am curious to know what happens when SGSH change to n3? or if SGSH changes the keys, do I have to change the sim card? or just update firmware?

i am using kadibo q5 which is similar to FYHD800C for around 4 months

[aaronlim]

autoroll and n3 support

[SGDVB]

hi guys,

noob here, i am curious to know what happens when SGSH change to n3? or if SGSH changes the keys, do I have to change the sim card? or just update firmware?

i am using kadibo q5 which is similar to FYHD800C for around 4 months

If only change key... Juz change key to continue watching.

But if change to N3, then you will have to change your viewing method. Either subscribe to SH or wait for cardshare.


*****************************************
Sent from my iPhone using Tapatalk

[croc]

i really need help...i cannot scan 135.5mhz...the other 2 no problem...i really need 135.5 cos i know it is ch 102 ~104...so anyone can help?

the other 2 actually don't need cos i know man u games cfm wouldn't broadcast from 105 onward unless last game of the season

[aaronlim]

try a new coaxial

[croc]

try to adjust your coaxial cable to ensure the dB is high so can detect. From my layman experience if dB < 85 it will not detect.

Sometimes coaxial tighten too much the dB will be too low. Just monitor the dB and screw and unscrew, or you try another cable point. My 2 boxes one no problem, the other one had some problem so i adjust the coaxial and can already. If coaxial cable too old maybe create alot of noise, try a new coaxial

don't think is cable rite? cos my issue is ALL channels can receive less than 135.5 channels....

[b3nzzz]

anybody able to have epl channels on their fy800 hd white set?

[cyrus666]

i have tried manual scan with 6090 symbol rate with 128.5,139.5 and 149.5 i have only got bpl channels 229.230,231 the rest i could not get. Pls help me

[croc]

139.5 or 135.5?

[tammytan]

I finally found out that mine is the first gen FYHD800, can I use the firmware provided here on page 7?

[cyrus666]

thanks for the reply, i have tried manual scan with 6090 symbol rate with 128.5,135.5,139.5 and 149.5 i have only got bpl channels 229.230,231 the rest i could not get. Pls help me

[jerjan]

I finally found out that mine is the first gen FYHD800, can I use the firmware provided here on page 7?

Is EPL a must ?





thanks for the reply, i have tried manual scan with 6090 symbol rate with 128.5,135.5,139.5 and 149.5 i have only got bpl channels 229.230,231 the rest i could not get. Pls help me

Let me contribute a bit, do not frame me if I am wrong

I believe white box are unable to scan for 135.5 or 135 (any white box FYHD got the channel ?)
It got nothing to do with signal strength.
As for channel 232-233 (149.5) It is all at the 1000+ channel.
You guys scan but did not go through all the channel............

just my 1/2 cents worth :joyous:

[Thirtys37en]

Hi im new here. Is there any firmware update for fyhd800cii & fyhd800ciii? Im not sure if those posted are meant for those sets.

Im having the same problem with only having 229, 230, 231 n 233 B*L channel. Have tried manual tuning (using the freq shared) but no success.

[amanosg]

Flashed FW from jatrospeed today. All systems go. mio Stadium channels are there (3x), plus other sports channels.
What I have: TNHD HDC888 (White)

[croc]

but i can't get leh

[tammytan]

Flashed FW from jatrospeed today. All systems go. mio Stadium channels are there (3x), plus other sports channels.
What I have: TNHD HDC888 (White)

Do you need to change the file name to FY.AP? Cos my set couldnt detect the file downloaded from page 7 here.

[moronicgenius]

u receiving 226-228 ok? these channels not running smooth for me, freeze every few sec.
Flashed FW from jatrospeed today. All systems go. mio Stadium channels are there (3x), plus other sports channels.
What I have: TNHD HDC888 (White)

[amanosg]

Do you need to change the file name to FY.AP? Cos my set couldnt detect the file downloaded from page 7 here.

I didn't change anything. Downloaded the file. Put into usb drive. File ext is bin.

[amanosg]

Yes ok. After flashing, have to rescan. Took a while to do it, when completed, the sports channels were there and the channel sequence is in the correct order.

[cyrus666]

amanosg what box are you using.... i am using hd800c-vii but my channels are not in order and also i don,t have 226,227,228. I used the fw provided by jatrospeed

[tammytan]

Pardon me but I felt I really have to speak my mind. I have join this forum recently hoping I could get some help from fellow FYHD user. But it seems like most of them here are only interested in asking questions and not interested to help out. I tried to read thru most of the related threads but still dont get any answers. A simple yes/no or can/cannot would have been very much appreciated. Nevermind, I have given hope on getting any answer here. Thanks for reading.

[trdspec86]

Hi, can anyone send me the firmware update file?
Its not available for download anymore.
Thanks in advance!

[cyrus666]

i need the new fw too someone pls help to upload it here. thank you

[Arraysys]

Channel 232 & 233 are located at frequency 149500mhz. From my understand n name channel is unable to display in FYHD box after scan.


Is EPL a must ?

Let me contribute a bit, do not frame me if I am wrong

I believe white box are unable to scan for 135.5 or 135 (any white box FYHD got the channel ?)
It got nothing to do with signal strength.
As for channel 232-233 (149.5) It is all at the 1000+ channel.
You guys scan but did not go through all the channel............

just my 1/2 cents worth :joyous:

[amanosg]

amanosg what box are you using.... i am using hd800c-vii but my channels are not in order and also i don,t have 226,227,228. I used the fw provided by jatrospeed

TNHD HDC888 (White) - this is what I have..The stock FW that came with the box had the channels mixed up too like what ur having now. After flashing jatrospeed's FW, the channels are in order.

[amanosg]

Other resources if u can't get your hands on wokring FW in this thread. Good luck. Always remember: Google is your friend. Self service makes you more resourceful and intelligent :P

[ronny1]

TNHD HDC888 (White) - this is what I have..The stock FW that came with the box had the channels mixed up too like what ur having now. After flashing jatrospeed's FW, the channels are in order.

your that box can get all 8 channel ?!

[fivehai]

Bro, Have u tried autoscan?? I did , and most of the MIO channel turn up ...
Mines FYHD800-cii

[ronny1]

Bro, Have u tried autoscan?? I did , and most of the MIO channel turn up ...
Mines FYHD800-cii

bro yours is fyhd or mvhd?
cause i know mvhd box can, but fyhd cannot yet :(

i know the mvhd looking box all can get.
all the fyhd boxes so far none reported.
i saw your box. loooks like its the older version of mvhd. thats why maybe your can?
i try also scan manual scan all scan scan scan all cannot :( haha

[almar01sg]

can try using nit search

[almar01sg]

the channel is at the end of the channel

[ronny1]

can try using nit search


the channel is at the end of the channel

what.... ?

[almar01sg]

usually there are auto search, nit search and manual search .
fyhd had the nit search rite.

[ronny1]

usually there are auto search, nit search and manual search .
fyhd had the nit search rite.

hmm bro, fyhd only got auto search manual search and full scan. so which is nit search?

[kungfu11]

yea i am also having problems finding the new channels like BPLS, BIO HD. searched manual and auto didnt get any. looked into 900+ 1000+ channels and no valid.

[dreamyeyes]

bro yours is fyhd or mvhd?
cause i know mvhd box can, but fyhd cannot yet :(

i know the mvhd looking box all can get.
all the fyhd boxes so far none reported.
i saw your box. loooks like its the older version of mvhd. thats why maybe your can?
i try also scan manual scan all scan scan scan all cannot :( haha

Hmm, seems like you got the same issue as me.
Anyone managed to scan 135.5mhz channels on your FYHD white boxes?

[kungfu11]

cant even enter decimals for my fyhd :(

[jerjan]

Let me contribute a bit again..........


Pardon me but I felt I really have to speak my mind. I have join this forum recently hoping I could get some help from fellow FYHD user. But it seems like most of them here are only interested in asking questions and not interested to help out. I tried to read thru most of the related threads but still dont get any answers. A simple yes/no or can/cannot would have been very much appreciated. Nevermind, I have given hope on getting any answer here. Thanks for reading.

If you would have try harder......(can)


i have tried manual scan with 6090 symbol rate with 128.5,139.5 and 149.5 i have only got bpl channels 229.230,231 the rest i could not get. Pls help me


i need the new fw too someone pls help to upload it here. thank you

You have already d/l the firmware that can scan the 128.5 Ks/s.
They is nothing you can do to get channel 226-228 as of now !.
Get a New set.


bro yours is fyhd or mvhd?
cause i know mvhd box can, but fyhd cannot yet :(

i know the mvhd looking box all can get.
all the fyhd boxes so far none reported.
i saw your box. loooks like its the older version of mvhd. thats why maybe your can?
i try also scan manual scan all scan scan scan all cannot :( haha


what.... ?

No framing pls. I may be wrong.....

I Believe there are three suppliers of this boxes.

1) First version FYHD ..CI ..CII Black ......(MVHD Wifi)..... can get 226-233

2) White FYHD including FYHD VII ? latest ( Cannot get 226-228)

3)TNHD HDC 888 (can get according to the pprevious post)

Hope this help !!

[ronny1]

Let me contribute a bit again..........



If you would have try harder......(can)





You have already d/l the firmware that can scan the 128.5 Ks/s.
They is nothing you can do to get channel 226-228 as of now !.
Get a New set.





No framing pls. I may be wrong.....

I Believe there are three suppliers of this boxes.

1) First version FYHD ..CI ..CII Black ......(MVHD Wifi)..... can get 226-233

2) White FYHD including MVHD VII ? latest ( Cannot get 226-228)

3)TNHD HDC 888 (can get according to the pprevious post)

Hope this help !!

bro, the fyhd black is not the MVHD wifi version. these are the ones cannot get 226-233.
MVHD is also black colour but their box are labelled mvhd instead of FYHD. these is the one MVHD wifi that can get 226-233.
FYHD sister model is the white colour, also came out another one white colour which i think is TNHD HDC 888. this one 50/50 can get 226-233.

please correct me if im wrong. i aga aga only :D
dont be offended if im wrong :P

[jerjan]

bro, the fyhd black is not the MVHD wifi version. these are the ones cannot get 226-233.
MVHD is also black colour but their box are labelled mvhd instead of FYHD. these is the one MVHD wifi that can get 226-233.
FYHD sister model is the white colour, also came out another one white colour which i think is TNHD HDC 888. this one 50/50 can get 226-233.

please correct me if im wrong. i aga aga only :D
dont be offended if im wrong :P

The earlier version FYHD black can get 226-228
TNHD HDC 888 confrm by amon.. can get ?

[tammytan]

My first version FYHD is able to get all the 8 channels plus all those new channels.

[nelsonhtb]

My first version FYHD is able to get all the 8 channels plus all those new channels.

Congrats, thought you given up.

Sent from my Nexus S using Tapatalk 2

[ronny1]

My first version FYHD is able to get all the 8 channels plus all those new channels.

hi! can tell us what is your exact model name and which firmware you use to get all 8 channel?

[almar01sg]

brother ronny1
sorry quote wrong inform, my friend tell me to use nit search on fyhd800C-ii. fyhd800c-vii, and fyhd800c i dont know they dont had nit search.
anywhere the fyhd had to update the firmware, right now it search the frequency in step 1 not 0.5.mhz. that why we cannot get the channel.

[ronny1]

brother ronny1
sorry quote wrong inform, my friend tell me to use nit search on fyhd800C-ii. fyhd800c-vii, and fyhd800c i dont know they dont had nit search.
anywhere the fyhd had to update the firmware, right now it search the frequency in step 1 not 0.5.mhz. that why we cannot get the channel.

no worries almar!
but my version is fyhd 800c-vii lol. but no nit search.
sorry what you mean by step 1 not 0.5mhz? i abit toot toot one :/

[tammytan]

hi! can tell us what is your exact model name and which firmware you use to get all 8 channel?

Model: HD800
SW version : 2011.03.07.V01
HW version : 7C28.NXP1611.1
Date version : 2010.V01

[ronny1]

Model: HD800
SW version : 2011.03.07.V01
HW version : 7C28.NXP1611.1
Date version : 2010.V01

erm then which firmware update you use to update ? mind sharing ? :D

[tammytan]

erm then which firmware update you use to update ? mind sharing ? :D

I got it in one of the thread here, but cant remember where as I have look thru so many threads. The file name should be FY.AP

[jerjan]

Your is the latest(mistake in my post MVHD VII= FYHD VII), believe is the same as the white FYHD, cannot get 226-228

[jerjan]

no worries almar!
but my version is fyhd 800c-vii lol. but no nit search.
sorry what you mean by step 1 not 0.5mhz? i abit toot toot one :/

Your is the latest(mistake in my post MVHD VII= FYHD VII), believe is the same as the white FYHD, cannot get 226-228

[ronny1]

I got it in one of the thread here, but cant remember where as I have look thru so many threads. The file name should be FY.AP

brother is it from dragon head? http://www.digital-kaos.co.uk/forums/f34/fy-hd-hd800-c-195345/
got 2 which one you use ah?
but your file format is FY.AP ? not .BIN ah ?

[ronny1]

Your is the latest(mistake in my post MVHD VII= FYHD VII), believe is the same as the white FYHD, cannot get 226-228

haha bro dont say lastest. lastest cannot get channel :blue:
even first gen can get lo.
sigh life is so tough, wan watch bpl also so hard :P

i was wondering if the newer model fyhd can take the firmware from what tammytan said which is in the file format of .AP. the newer models take in .BIN

[tammytan]

brother is it from dragon head? http://www.digital-kaos.co.uk/forums/f34/fy-hd-hd800-c-195345/
got 2 which one you use ah?
but your file format is FY.AP ? not .BIN ah ?

Cant remember, but looking thru your post it seems to me yours is a different model from mine. Better dont upgrade with my FW, later brick.

[ronny1]

Cant remember, but looking thru your post it seems to me yours is a different model from mine. Better dont upgrade with my FW, later brick.

ahhh okay.
thanks for your help anyway. ^^

[jerjan]

haha bro dont say lastest. lastest cannot get channel :blue:
even first gen can get lo.
sigh life is so tough, wan watch bpl also so hard :P

i was wondering if the newer model fyhd can take the firmware from what tammytan said which is in the file format of .AP. the newer models take in .BIN


I believe is the tuner they use, cheaper? (read somewhere in the forum) therefore not new mean can get.
You CANNOT upgrade .bin with .AP (system will not accept ,think so me not pro)
Again I think hor the FY.AP is the original firmware (look at the date)

[ronny1]

I believe is the tuner they use, cheaper? (read somewhere in the forum) therefore not new mean can get.
You CANNOT upgrade .bin with .AP (system will not accept ,think so me not pro)
Again I think hor the FY.AP is the original firmware (look at the date)

okay thanks friend!
time to bang wall liao $%%^^&& (:

[darkpool]

After flashing FY HDC 800 with new firmware, how to auto search for channels again? what are the settings like country and frequency?

thanks a lot

[dreamyeyes]

Just wondering if there will be a new firmware update to resolve the missing 3 BPL channels?
Anyone can foresee here?

[NT-Social]

Let me contribute a bit again..........



If you would have try harder......(can)





You have already d/l the firmware that can scan the 128.5 Ks/s.
They is nothing you can do to get channel 226-228 as of now !.
Get a New set.





No framing pls. I may be wrong.....

I Believe there are three suppliers of this boxes.

1) First version FYHD ..CI ..CII Black ......(MVHD Wifi)..... can get 226-233

2) White FYHD including FYHD VII ? latest ( Cannot get 226-228)

3)TNHD HDC 888 (can get according to the pprevious post)

Hope this help !!


Hi,

I am currently having a TNHD HDC888 but unable to get any of the BPL channels.. i tried to do the scans but cant get the channels.. anyone can guide how to scan for the BPL channels? thanks in advance!

[dreamyeyes]

Hi,

I am currently having a TNHD HDC888 but unable to get any of the BPL channels.. i tried to do the scans but cant get the channels.. anyone can guide how to scan for the BPL channels? thanks in advance!

Did you update your set using the latest firmware? if yes, do a restore factory defaults.. you should be able to get the channels.

[NT-Social]

Did you update your set using the latest firmware? if yes, do a restore factory defaults.. you should be able to get the channels.

How do i know if i have the latest firmware. I have just bought this. Previously using a DM500C which i have relocated to my room..

[eric923456]

one question. Is any of the fyhd model able to support streaming of channels through rj45 to any computer connected to router?

[fivehai]

bro yours is fyhd or mvhd?
cause i know mvhd box can, but fyhd cannot yet :(

i know the mvhd looking box all can get.
all the fyhd boxes so far none reported.
i saw your box. loooks like its the older version of mvhd. thats why maybe your can?
i try also scan manual scan all scan scan scan all cannot :( haha

213446
My current set.
213447
Channel 229-231 as it is.
Channel 232-233, it never change name, but still receive the channels. Clearly.

213448
Rest of channel at 9++.
If your setting at 135500/6090/qam256, only scramble channels.
Adjust your setting to 135000 and search.

[dreamyeyes]

looks like the scan only works for mvhd

[Manikam]

Fyhd hd800c-vii cannot pick up 133500mhz frequency. Seems like hardware limitation. :(
not sure if there is a official firmware from fyhd manufacturer.

[DBTraitor]

Now sure if you could find your firmware here
Lastest Firmware for MVHD/FYHD/TNHD white and black box (http://www.singapore-dreambox.com/lastest-firmware-for-mvhd-fyhd-tnhd-white-and-black-box/)

[DBTraitor]

Some answer may work for your box
http://www.digital-kaos.co.uk/forums/f34/mvhd-new-channels-epl-359981/

[rekria]

Doesn't Work For Mhd 600C. Don't Think It Will Work For Newer Versions Of Fyhd either. The Main Issue Is That The Set Top Boxes Just Won't Receive 135 Or 135.5GHz. Not Sure If A Firmware Update Can Solve This Issue. Or Is It A Hardware Limitation. AnyOne Can Advise?

[NT-Social]

Now sure if you could find your firmware here
Lastest Firmware for MVHD/FYHD/TNHD white and black box (http://www.singapore-dreambox.com/lastest-firmware-for-mvhd-fyhd-tnhd-white-and-black-box/)

Hi DBTraitor,

i followed ur link and is the same link as suggested by dreamyeyes.. i tried the image and it works for TNHD 888

just fyi for other TNHD 888 users.. the image for the white FYHD works for TNHD 888 too.. except it can only scan 229, 230 and 231.

I am receiving alot of distortions though. Anyone else facing similar distortion issues and how to solve it?

[tammytan]

I thought it would be good to share here how I manage to get all the new channels here since I've got PM asking me on how I do it.
1) Make sure you have the latest FW ( file should be FY.AP), not those on pg 7 here.
2) select Menu/ Channel search / Manual search.
3) At Frequency(MHZ) select 128 / 136 / 149 (do one frequency at a time) and Symbol at 6090
4) Before you press ok to search,WAIT for the Quality bar below for signal strength first. If no signal shown, pressing ok will not get you any new channel. (It may take around 5-30 sec before you see the Quality bar showing signal and it may take a few try before you get it.)


Channel 101 to 106 will be shown and 107/108 will be shown as unknownChl
Remember all the new channels will be situated at the back and will not be in correct order. I just save them as FAV for easy access. Hope it helps.

[cyrus666]

tried your fy.ap software but it is not detecting in my box fyr hd800c-vii. I even renamed the file to .bin it detects but when loading it says error.

[tammytan]

tried your fy.ap software but it is not detecting in my box fyr hd800c-vii. I even renamed the file to .bin it detects but when loading it says error.

Read somewhere only FYHD HD800C I II III are able to use this. My is first version FYHD HD800C.

[cyrus666]

well .ap does not detects on the fyhd hd800c-vii pls do not put that file and try or rename it to .bin because your box might brick.

[tammytan]

This is where I've downloaded the FY.AP file
http://www.digital-kaos.co.uk/forums/f34/fy-hd-hd800-c-195345/
post #8 (Dragon head)

[nelsonhtb]

This is where I've downloaded the FY.AP file
http://www.digital-kaos.co.uk/forums/f34/fy-hd-hd800-c-195345/
post #8 (Dragon head)

Hmm, this file was from Jan 2012.

[rekria]

I'm using the MHD 600C which apparently is the latest White variant of the FYHD800 series. Managed to receive all channels including 229, 230 and 231. Channels 232 and 233 are stored in the 1000+ channel numbers. From the posts I've Read So Far, it is evident that the newer series FYHD STBs are unable to receive channels 226 to 228. This is because the STB is Unable to pick up any signals from freq 135 and 135.5GHz. Even the whole spectrum from 130 to 140GHz has zero signal strength!

I'm not sure if this can be solved through a firmware update or it's a H/W limitation of the STB. Any kind souls can advise on this?

[diet7up]

Hi guys can I update the firmware that u guys post earlier on set fyhd (hdc-800 sf-v2.1, hw-v2.0 & tndt800) for viewing bpl thanks

[1inuyasha]

Hello those who wants all the BPL channels can rescan now at 135.5 6090 will work now

[ong26bj]

Hi, newbie here. I am getting pixelated and sometimes no image on these channels (Travel Channel HD, GINX HD, iConcerts HD, Fox Family Movies HD, CinemaWorld HD, Sky News HD & channel M HD) on my FYHD800C. These 7 channels were picked up on auto-scan at 482MHz, Sym6875, 256QAM.

Would appreciate if some master can advise on this. Thank you in advance.

[zhugeliang90]

Hi, me a newbie here can any one here help how to get channel 227-228 from TNHD HDC-800-E white setup box? As I m new new step by step pls thanks

[drakelord]

I thought it would be good to share here how I manage to get all the new channels here since I've got PM asking me on how I do it.
1) Make sure you have the latest FW ( file should be FY.AP), not those on pg 7 here.
2) select Menu/ Channel search / Manual search.
3) At Frequency(MHZ) select 128 / 136 / 149 (do one frequency at a time) and Symbol at 6090
4) Before you press ok to search,WAIT for the Quality bar below for signal strength first. If no signal shown, pressing ok will not get you any new channel. (It may take around 5-30 sec before you see the Quality bar showing signal and it may take a few try before you get it.)


Channel 101 to 106 will be shown and 107/108 will be shown as unknownChl
Remember all the new channels will be situated at the back and will not be in correct order. I just save them as FAV for easy access. Hope it helps.

TAMMY, THANKS FOR YOUR ADVICE BUT IS THE SOUND AVAILABLE? THE SOUND FOR SOME CHANNELS IS NOT AVAILABLE FOR ME BUT NEVERTHELESS, REALLY THANKS ALOT

[zhugeliang90]

How to get the 135.5 6090?

[jerjan]

Read from page 1 start read and read

[NT-Social]

zhugeliang90.. yea.. read from the start.. the info all there.. but it is also summarised step by step *******************

[zhugeliang90]

How to get channel 852 & 839?

[Pokemon999]

852 and 839 are On Demand channels. Only with SH box.

[neb04]

Model: HD800
SW version : 2011.03.07.V01
HW version : 7C28.NXP1611.1
Date version : 2010.V01

Hi Tammy,

Can you tell us what the Model No. on your box front is? It should read something like HD800C, HD800Cii, etc.
Thanks.

[mradorable]

Hi Tammy,

Can you tell us what the Model No. on your box front is? It should read something like HD800C, HD800Cii, etc.
Thanks.


Tammy, I would also like to know this, would appreciate if you could give us more details!

I am currently using a white FYHD800-C-III and was not able to upgrade the firmware from here:
http://www.digital-kaos.co.uk/forums/f34/fy-hd-hd800-c-195345/
post #8 (Dragon head)

I inserted the USB thumbdrive to the back of the box (I only have the slot at the back), and when I tried to update it from the menu it said it could not find the file in the USB. I tried rebooting it and trying again but it did not work.

Can anyone help? Thanks!

[Civicguy]

I thought it would be good to share here how I manage to get all the new channels here since I've got PM asking me on how I do it.
1) Make sure you have the latest FW ( file should be FY.AP), not those on pg 7 here.
2) select Menu/ Channel search / Manual search.
3) At Frequency(MHZ) select 128 / 136 / 149 (do one frequency at a time) and Symbol at 6090
4) Before you press ok to search,WAIT for the Quality bar below for signal strength first. If no signal shown, pressing ok will not get you any new channel. (It may take around 5-30 sec before you see the Quality bar showing signal and it may take a few try before you get it.)


Channel 101 to 106 will be shown and 107/108 will be shown as unknownChl
Remember all the new channels will be situated at the back and will not be in correct order. I just save them as FAV for easy access. Hope it helps.




i sincerely thank you so much. Like you, i had a very old FYHD and was told I need buy new ones. Saw your post and followed carefully and it worked !!

Let me share with everyone here the photos so that you can see my box and my firmware.

as tammy said, the quality bar is important. If it is empty, no good. Wait,, till it is yellow... Very important :)

now watching Man U match...

thank you TAMMY !!!!! You saved me a lot of $$$$$ :)

[Jazzyboy]

Hi everyone. Can I say that I should get a MVHD HD800C-V instead of those FYHD series in order to watch B*L channels?

I am considering to get either MVHD or FYHD but after reading this thread, I realised that FYHD is unable to scan the channels.

Can any experts advise me on this? Thank you.

[drakelord]

Civicguy, can you get the sound from the BPL Channel? i could not get any sound from it and wondering how to solve the problem. Pls do guide me.

[zxcvbnm3817]

Hi everyone. Can I say that I should get a MVHD HD800C-V instead of those FYHD series in order to watch B*L channels?

I am considering to get either MVHD or FYHD but after reading this thread, I realised that FYHD is unable to scan the channels.

Can any experts advise me on this? Thank you.

Looking for a answer on this also. Kindly PM Me.

[jeffchiang]

Looking for a answer on this also. Kindly PM Me.

My FYHD white MHD 600C can get all B*L channels. MVHD with the latest firmware able to get too.

[ultrakiasu]

Something to ponder about...

In about half a year ago and before, its a norm for most of the guys here to bash FYHD boxes, and preach the virtues of Dreamboxes..
Nows seems the tides had changed... discussion of these boxes quite brisk.

Old Deng once said..
Regardless black or white cats, it's a good one if they catch rats...

[micromouse]

Hahahaha.. You Have Been Hacked!!!

[Jazzyboy]

My FYHD white MHD 600C can get all B*L channels. MVHD with the latest firmware able to get too.

Thanks for your advice :joyous:

[anathema]

Hi ultrakiasu, can u advise if the 2013-05-08 FW is compatible with FYHD-800e? Its current FW is dated 2013-04-08.

[anathema]

Hi dbtraitor,

i have a white FYHD-800e. Is this newer than the HDC-800 model series? Wondering if i can use the Singapore dreambox 05-08 FW.

[HokkienPeng]

I followed the steps. Upgrade software and scan again. All have. Simple enough and finally figured how to do it correctly.

Mine is FYHD white box (800-IV). Can cancel Mio Stadium once contract expire on Sep.



:party :

[dragon head]

http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/misc/quote_icon.png Originally Posted by tammytan http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/buttons/viewpost-right.png (http://www.digital-kaos.co.uk/forums/f34/fy800hd-302337-post2056510/#post2056510)
I thought it would be good to share here how I manage to get all the new channels here since I've got PM asking me on how I do it.
1) Make sure you have the latest FW ( file should be FY.AP), not those on pg 7 here.
2) select Menu/ Channel search / Manual search.
3) At Frequency(MHZ) select 128 / 136 / 149 (do one frequency at a time) and Symbol at 6090
4) Before you press ok to search,WAIT for the Quality bar below for signal strength first. If no signal shown, pressing ok will not get you any new channel. (It may take around 5-30 sec before you see the Quality bar showing signal and it may take a few try before you get it.)


Channel 101 to 106 will be shown and 107/108 will be shown as unknownChl
Remember all the new channels will be situated at the back and will not be in correct order. I just save them as FAV for easy access. Hope it helps.




"Thanks so much,able to watch now".
press QAM scan

[ihatedb]

Hi all,

Using fy hd800c vii, after update epl channel available but I lost star Chinese movie legend, the normal channels ( channel 8 ,5 etc.) also the channel list is all jumble up even after I do a full rescan and factory reset... Pls help

[jerjan]

Hi all,

Using fy hd800c vii, after update epl channel available but I lost star Chinese movie legend, the normal channels ( channel 8 ,5 etc.) also the channel list is all jumble up even after I do a full rescan and factory reset... Pls help

Do another auto scan with symbol 6875 ?
Arrange Channel by LCN ?

p.s i dont have a VII.

[Civicguy]

Civicguy, can you get the sound from the BPL Channel? i could not get any sound from it and wondering how to solve the problem. Pls do guide me.


Hi bro. I dun have any sound issue. It works right away.

[ihatedb]

Negative bro... Tried but failed... Can't watch local channels unless I unplug and use tv direct. Channel 103-107 missing...

[mardybum]

Doesn't seem to work on HD800C-II...tried all the steps. Even updated the firmware..

[jerjan]

Negative bro... Tried but failed... Can't watch local channels unless I unplug and use tv direct. Channel 103-107 missing...

try manual scan 642000
symbol 6875