View Full Version : Pajero 3.2 DID 2006 ECU Mitsubishi
sanek2xlc
10th November, 2012, 08:00 AM
Hello, who can make tuning in this car Pajero 3.2 DID 2006. Not free.
sanek2xlc
10th November, 2012, 10:28 AM
Calculate please cs in this tuning.
LaraVAG
10th November, 2012, 10:56 AM
checksum is calculate in writing, when you use galleto or piassini
powertdi
10th November, 2012, 11:04 AM
Sanek what tool do you use for read this format? Winols not detection CS because its a calibration. Your right siz***1091; should be 512kb or 1mb. Anyway. CS can de changed manually.
sanek2xlc
10th November, 2012, 01:24 PM
The problem remains, who can make the tuning on this car. Not free.
powertdi
10th November, 2012, 11:38 PM
I do spme of this , but you need correct file read. For this one I dontknow.
LaraVAG
11th November, 2012, 11:05 AM
easy engine to tune, but use some good tool to read all flash.
kennfeld
11th November, 2012, 02:01 PM
checksum is calculate in writing, when you use galleto or piassini
you can also calculate it manually ;) or creat the algorithm yourself if you are under winols
sanek2xlc
12th November, 2012, 12:48 PM
Here's manual of Piasini, to read the ECU. There is no need to calculate cs.
sanek2xlc
12th November, 2012, 02:09 PM
No one has done this ECU? Today opened the ECU, is inside the CPU MITSUBISHI MH7203FA. Piasini and EcuFlash read 128kb.
LaraVAG
12th November, 2012, 05:56 PM
pass in PM ;)
drifter17a
4th January, 2022, 01:46 AM
No one has done this ECU? Today opened the ECU, is inside the CPU MITSUBISHI MH7203FA. Piasini and EcuFlash read 128kb.
Hi sanek
do you create damos files? I bought one for MEDV and description had sanek so wasn't sure if it was you
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.