View Full Version : Accord - 54plate - mileage request
neuro
10th November, 2012, 01:18 PM
Hi there
As my knowledge about mileage adjustment is limited i know for sure someone will be able to sort out one for me,
In attachment 93c56 8bit current value on clock 105052 miles
require something in range of 92-93k
Thanks in advance for any help.
nomis
10th November, 2012, 02:00 PM
Read as 16bit, your dump look's like corrupted . How you read which device, in-circuit ?
neuro
10th November, 2012, 02:38 PM
16bit reading attached. eeprom removed from dash, to read i use gq-4x programmer.
andersonmaxi
10th November, 2012, 02:51 PM
here is ur dump with 93000km
good luk
neuro
10th November, 2012, 02:56 PM
thanks andersonmaxi will give it a go later and let you know guys.
nomis
10th November, 2012, 03:30 PM
It will show you 93087km..
neuro
11th November, 2012, 10:12 PM
When i wrote back edited dump, trip shows 737615 miles and gauges stopped work, when i reversed 16bit dump back, there is no difference gauges didn't move even for a fraction of mm.
I will try to drop 8bit version and give it a go.
Any tips how to sort out that issue ?
nomis
11th November, 2012, 11:14 PM
Mate select this chip and write this dump..
Good Luck.
neuro
12th November, 2012, 12:18 PM
Mate select this chip and write this dump..
Good Luck.
I wrote your dump and needles still wont move and mileage is 635215 mls pict in attachment.
nomis
12th November, 2012, 01:16 PM
Try to swap dump then write again ..
And use again your Sony Ericsson LT15i .
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.