PDA

View Full Version : Best BDM software to use with bdm100



MarkPRP
11th November, 2012, 08:41 PM
Hi Guys,

I need a good version on BDM CMD v1255 and update file to sort my BDM 100 unit out.

Dimsport software works fine with it, but I cannot read edc16+ from sprinters etc!

Many Thanks

Mark

spawns3
11th November, 2012, 08:56 PM
Hi Guys,

I need a good version on BDM CMD v1255 and update file to sort my BDM 100 unit out.

Dimsport software works fine with it, but I cannot read edc16+ from sprinters etc!

Many Thanks

Mark

Search in forum and u will find the Update to work with CMD 1255 version .

Cheers

MarkPRP
11th November, 2012, 09:03 PM
Hi Spawns3

I have tried all the software available on the forum and cannot make it work!

Thanks

pablo1971
11th November, 2012, 10:20 PM
if you have used the bdm100 with dimsport it will not be updateable with just software on dk------you will need to remove i think hc11 and a 25c eeprom and reprogram them.....

Babos
12th November, 2012, 05:57 AM
it is your soft.
pass in PM and manuals ;)

Babos
12th November, 2012, 06:00 AM
if you have used the bdm100 with dimsport it will not be updateable with just software on dk------you will need to remove i think hc11 and a 25c eeprom and reprogram them.....

yes i think he must reprogramming bdm problem not in soft but hw in bdm.

peugeot
12th November, 2012, 09:18 PM
Hi Spawns3

I have tried all the software available on the forum and cannot make it work!

Thanks
Try these Mark , run no 2 and then see if it works , Ihad same problem as you and it cured mine
Make sure bdm is powered up when doing update :proud:

tagar
13th November, 2012, 06:27 PM
Try these Mark , run no 2 and then see if it works , Ihad same problem as you and it cured mine
Make sure bdm is powered up when doing update :proud:

avast detects virus, is this safe? my bdm100 also is crazy!

pablo1971
13th November, 2012, 06:38 PM
yes,its safe....just disable antivirus first mate..

peugeot
13th November, 2012, 07:31 PM
avast detects virus, is this safe? my bdm100 also is crazy!
Yes safe ,no problem av dont like .exe and other downloaded files as above,:fisheye: turn off until you have updated .

maaxxyy
15th January, 2013, 12:58 AM
Hi guys after this update, can the original software supplied with the unit be used?

rabie_m
15th January, 2013, 01:31 AM
HH...........................

maaxxyy
15th January, 2013, 01:50 AM
??.....................................

spawns3
15th January, 2013, 02:42 AM
Hi guys after this update, can the original software supplied with the unit be used?


Use the sw u found here on DK , CMD 1255

maaxxyy
15th January, 2013, 02:43 AM
Which software is the newest? Dimsport or CMD?

darius89
15th January, 2013, 08:18 AM
I updated my with this update, now works with both softs...Dim and CMD

spawns3
16th January, 2013, 02:38 AM
Which software is the newest? Dimsport or CMD?


CMD mate .... : )

maaxxyy
17th January, 2013, 01:24 AM
Cant get this to work with my bdm!
Update
Finally got it to work, works with dimsport and cmd software, but after using the dimsport software you need to run the 2.exe file again for it to work with cmd software! Thanks