PDA

View Full Version : update mpps



b10m7
11th November, 2012, 08:50 PM
hello, anyone know if it is possible to update a clone from version mpps v10 to v12?

mishu_b
12th November, 2012, 09:23 PM
..
yes it is!

br

b10m7
12th November, 2012, 09:44 PM
thanks for the reply friend!

mishu_b
13th November, 2012, 09:45 AM
...
if you will do using sw than yur tool will work only for 128 runs, than the tool will be dead.

the easy way is to program the uC with the v12 fw counter freeze or without counter!

br

b10m7
13th November, 2012, 12:53 PM
and what is the procedure?

beltronics
13th November, 2012, 01:48 PM
...
if you will do using sw than yur tool will work only for 128 runs, than the tool will be dead.

the easy way is to program the uC with the v12 fw counter freeze or without counter!

br

how does that do?
thanks.

Artilect
13th November, 2012, 01:54 PM
If you have some good programmer to flash the MCU then I can send you a dump. But if you dont have, its the best solution to buy programmed MCU via e-bay and just desolder old one and put the new one on board to get V12 without the counter.

BR

b10m7
13th November, 2012, 03:28 PM
I own programmer, you can send the dump. thanks

johnthepilot
14th November, 2012, 02:48 PM
Hi mate i also have programmer please send dump:dito:

diag1001
17th November, 2012, 01:43 PM
MPPS V12 Chip-Tuning (http://www.ecutool.com/MPPS-V12-Chip-Tuning_9129.html#4) thanksssssssssssssssssssssssssssssssssssssssss.