DM800HD PVR Clone DreamboxUK Image #69

[Danian]

I am new to the dreambox and general used the image that came with the Dreambox when i bought it. However i have just been give a DM800HD PVR and need to update a very very old image that is on it. I have look at the chip in the box and it has printed on it:

DM800 11491
SIM210

and when i hold the power button in on booting the box it stats that is a #69, which i presume is the bootloader?

However i need to put a new image on this device, all my other DM800 seem to be running DreamboxUk images, but i can not seem to find an image for a clone 210 #69. Is this because its really old?

Any suggestions welcome, as i know very little about the flash images.

Thanks,
D

[reaper101]

read this post and update the bootloader

http://www.digital-kaos.co.uk/forums/f207/new-sim2-ssl-84-dm800-sim201-sim210-cards-235582/

hope it helps

[Danian]

read this post and update the bootloader

http://www.digital-kaos.co.uk/forums/f207/new-sim2-ssl-84-dm800-sim201-sim210-cards-235582/

hope it helps

Thanks,

I have read through the attached link but still not sure what to do.

I have a SIM210 with #69 that i need to update on a clone DM800HD PVR.

Do i just browse to the box using the Internet Explorer and Flash the box with the .ipk,.bin or the .nfi image? is it that simple?

I then want to update the image on the the DreamBox to DeamboxUK image DreamboxUK_v2.1.1_SIM2_84A_DM800.nfi

[reaper101]

you will have to update the bootloader first
connect the box to your router and type the ip of the box in your pc browser this will take you to an update page where you can update the bootloader

Digital Kaos - Downloads - sim201 84a & 84b bootloader (http://www.digital-kaos.co.uk/forums/downloads/images/2/sim201-84a-84b-bootloader-2291/)

i have never done one as old as a #69 oldest one i did was a #75 so maybe update to this bootloader first restart box each time then use the ones above
once you have updated the bootloader you can now put on the image you want

sim201_ss84b:
new dm800 sim2 ssl 84b
sim2 just released the new secondstage loader ssl-84b
with this new ssl the user will be able to use original drivers 9-11-2011 without modification or adding old files
the new ssl is used only with drivers 9-11-2011 and is incompatible with old drivers

[mukono]

Did you fix it ? I have an old loader too, but no image work on it.

[mukono]

Any way, How to know if my Dm is a sim or Esta: Inside it's writen Hig 003 rev j.

[Jed1Kn1ght]

I have also old loader and cannot get other image on it, anyone fixed this?