Toyota Sequoia 2004 IMMO (89780-34010)

[AVDIMON]

Hi all, got stuck and trying to understand how to program 4d transponder...

I've Toyota Sequoia 2004 IMMO (89780-34010) and it has 93C66 inside.

Please help me pair keys, my tries didn't work at all. Thanks!

First key:
B2 D4 B5 ED 75 16
ID1: A2C418
ID2: B158BB

Second key:
B2 D3 B8 4F 1F 16
ID1: 4B6125
ID2: B81CEB

[AVDIMON]

I tried to switch bytes like: D4 75 ED B5, but that didn't work. Any ideas? Thanks!

[koncimobil]

this immo box need id67 with page1. 32, 52, 72, 92

[AVDIMON]

I got keys from Toyota dealer by VIN. Apperently they won't work.

Here is new key, I got 4D-67. Will that key work?

32 64 1C 3E 1F 14
ID1: 676FE0
ID2: 95AC96

[elmaalouf]

did u tried it using Toyota Smart Keymaker OBD (http://ecutool.com/Toyota-Smart-Keymaker-OBD_1113.html) ?

[AVDIMON]

I order it, but didn't receive it, looks like lost by mail. Should it work? Did you try it?

So, there is no way to write 4D-67 key to IMMO?

[elmaalouf]

if u have car prog u can add it

[AVDIMON]

Alright, I am going to buy it than, what version can do that?

[leandroks]

Hi m8 it is a 4c transponder not 4d.

[ray-ray]

Wrong!
In 2002 sequoia can be reset with Tcode obd2 use 4c logic.
2003-07 immo. Box must be replace or flash to learn mode, use 4d-67 logic. Once the immo light turns off because 2 keys have been register, car will not start yet. You must marry the immo. And the ECU by grounding the obd2 (4 & 13) for 30min.
The dash will light up and blink red, green& yellow. Make sure you have jumper box on the battery for that 30min. So what you need is a learn mode file & 4d-67 key a paper clip and a stop watch. You can buy a immo. From the stealers and read and save your learn mode dump.

[leandroks]

It is possible, maybe scorpio can be wrong...

[hauwkee]

It is possible, maybe scorpio can be wrong...

Ray Ray is the Toyota Lexus Specialist he design and engineer
The Penloader and he have a lot of experience I getting There as well practice and reading
question to ray when u used penloader Do u make virgin ECU then prog key on board Because i got ecu reflash by third party solution with key ready to start car (plug n play )
i m getting some programmer and transponder reader my next flash i will order service read dump from ecu and keys save it for next time i think u need like 4 file for lexus toyota
PS Ray Ray don t get offended on me trying to understand how the penloader work .
I m trying to understand key logic from Dump IMMO i think toyota or honda because it s earlier system good for learning

[leandroks]

thats exactly what i ve meant, scorpio can be wrong..

[AVDIMON]

So, only one solution, new immo box? no way to program the key into the dump?

[shitad]

This is virgin file it works 100% every Time. Put keys into ignition without turning on one after the other for 5 seconds then bridge 4+13 for 30 minutes with key on.

[AVDIMON]

Thanks, I am going to try and let you know.

[AVDIMON]

Thanks shitad, got it up and running with 4D-60 chip! Thanks to everyone who replied.

[hauwkee]

This is virgin file it works 100% every Time. Put keys into ignition without turning on one after the other for 5 seconds then bridge 4+13 for 30 minutes with key on.

any other virgin toyota lexus dump and key logic for testing purposes tks

[shitad]

any other virgin toyota lexus dump and key logic for testing purposes tks


There is the 47010 I seek Virgin G key dumps if you have any.

[Siaka25]

thanks friend

[guillermemosz]

You need 3 keys? 2 master and one valet key?