View Full Version : Hitachi 59 disc tray will not open
RouseyUK
21st November, 2012, 11:57 AM
I tried flashing a Hitachi 59 last night. JF said the flash was successful, but the drive will not eject. I open the drive manually and power the drive up and the tray closes, but when I press eject on JF or my CK3i it will not open. I also tried the drive in the Xbox and the drive will still not eject. There is no movement from the drive when I press eject, any ideas
cunny
21st November, 2012, 12:17 PM
can you still see it in jf?
RouseyUK
21st November, 2012, 12:30 PM
Yes JF still sees it, tried flashing back to stock and the drive still won't eject
cunny
21st November, 2012, 03:02 PM
Have any of the ribbons come out? also try pressing eject 2 or 3 times on the console.
Or does it respond to eject in jf or on the dashboard of the console
RouseyUK
21st November, 2012, 04:14 PM
I tried pressing eject several times on the xbox and also on JF and the CK3i. It does eject when i eject it through the drive showing on the laptop.
rupert murdoch
22nd November, 2012, 02:42 PM
I tried pressing eject several times on the xbox and also on JF and the CK3i. It does eject when i eject it through the drive showing on the laptop.
I had one that did that manually open the drive tray and look for the rubber band on the big and little runner wheels. Take the band off now this is gonna sound mad but boil the kettle put the rubber band into a mug wait for the kettle to boil then pour the boiling water into the mug leave it for ten seconds then put cold water into the mug this will cause the band to shrink
Dry the band and put it back where it should be and see if that works
cunny
22nd November, 2012, 02:45 PM
Its sounds more like its still in mode B for some reason, if its trying to eject and not doing then above could work as ive done this with quite a few liteons
rupert murdoch
22nd November, 2012, 04:31 PM
Its sounds more like its still in mode B for some reason, if its trying to eject and not doing then above could work as ive done this with quite a few liteons
Its worth a try like but if it was working fine before flashing he may have inadvertently shorted something.
As long as he's got his drive key he will be ok the worst scenario is a new drive.
TheMegaSnedz1888
22nd November, 2012, 04:45 PM
stuck in b mode by the sounds of it reflash drive unplug power for ck3 plug cables back in and turn it on in the xbox also maybe tray sticks had one like that would eject if disk was in drive but if not it would stick had to press drive tray in the way when pushing eject
TheMegaSnedz1888
22nd November, 2012, 04:46 PM
also hitachi are crap at reading backups would get a better drive i use a liteon instead of my hitachi 47 iv no been banned yet 4 years and counting tic tock lol
RouseyUK
22nd November, 2012, 05:09 PM
I have my drive key so if I do need a new drive that will not be a problem. I thought it might be stuck in mode b but I thought as soon as you turned the power of the drive reset. I will have another go at flashing back to stock and reflashing. It this fails I think I will buy a new drive.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.