PDA

View Full Version : VW Crafter EDC17C54-3.39



Anmed
21st November, 2012, 10:20 PM
Hello!
Has anyone read and write these blocks successfully? What tool works?

http://www.digital-kaos.co.uk/forums/attachments/f173/156630d1353180360t-fg-tech-galletto-2-edc17c54.jpg

FGTech sees ID, but does not read and save log errors. Official K-TAG did not even see ID, no connection at all. May be the wrong information about Boot or connect?
http://www.digital-kaos.co.uk/forums/attachments/f173/156638d1353180876t-fg-tech-galletto-2-attachment16.jpg
http://www.digital-kaos.co.uk/forums/attachments/f173/156639d1353181185t-fg-tech-galletto-2-attachment17.jpg

Miketune
22nd November, 2012, 01:37 AM
FG tech read/ write ok
have done it EDC17CP20/14

bootmote trice pass

try agian

Anmed
22nd November, 2012, 07:35 AM
FG tech read/ write ok
have done it EDC17CP20/14
Have I asked about EDC17CP20/14? At the moment I am not interested in this unit, I am interested EDC17C54-3.39 VW Crafter CKTB 2.0L.

duco
22nd November, 2012, 07:48 AM
I try last week to read this ecu, but inside there is a new antituning type. I close the ecu. The boot is ok! Bye

Anmed
22nd November, 2012, 08:00 AM
inside there is a new antituning type
Yes, I'm talking about it. But I have no right to say "Goodbye!" - I have to find a solution.

Alpinesport
22nd November, 2012, 08:02 AM
hi new Genius works fine on c54 and probably other pro tool

Anmed
22nd November, 2012, 09:51 AM
Genius regarding information 100%? Please give a link where to buy Genius. What other options? This ECU is declared in MagPro , but I have no information on how it works.

duco
23rd November, 2012, 07:48 AM
I have new genius and new trasdata, all from dimsport, but at the moment we can't work on this ecu.

evilruff
23rd November, 2012, 08:21 AM
CP54 doesn't work in Galletto2... seed keys are wrong..
From clones - K-Tag..
Official - CMD

Anmed
23rd November, 2012, 01:12 PM
From clones - K-Tag..
I tried K-TAG official. Does not work.
I can calculate the seed_key by serial number Tricor.
How can I feed seed_key ECU?

Estebanpuri
2nd March, 2023, 09:53 PM
946489946490Hi, this is for kess v2 on tricore mode. maybe helps.

Tawe
2nd March, 2023, 09:57 PM
I've read many of these even with Ktag clone :) Make sure you use correct protocol and that have good bootpin connection. If you need some help, write me PM.

adxinnixda
30th November, 2023, 08:03 AM
Hi, I pulled out this thread because of some differences writing this crafter ecu by OBD with fox. The write job was done fine, also the chk fox made, car starts after I wrote the file .... but ... I made a test - readout after the dump was written to ecu and compared it with dump i wrote to it. Not all changes made are in the test-readout , how could that be ???