PDA

View Full Version : BDM100 key problem



gelomeloman
22nd November, 2012, 10:58 AM
Hello. Last time i have a problem with my BDM.
I have 2 BDMs and both stoped work. They only work with DIM555 software.
When i start BDM1255 i see command line and text:
"Protection Key time out or family not enabled"

Where is the problem.
Problem begins when i reinstal whole Windows system.

rabie_m
22nd November, 2012, 12:45 PM
PROGRAM PROM BDM 93C46 WHIT THIS DUMP WHIL WORCK PERFECTE

peugeot
22nd November, 2012, 08:39 PM
Hello. Last time i have a problem with my BDM.
I have 2 BDMs and both stoped work. They only work with DIM555 software.
When i start BDM1255 i see command line and text:
"Protection Key time out or family not enabled"

Where is the problem.
Problem begins when i reinstal whole Windows system.


Install file no 2 from here !
plug in usb and and open cmd soft , all should be good for
v12 clone . If not install no 1 :party:
When I used 555 I could no longer use cmd as fw was changed in bdm . This file fixed for me .Enjoy !

gelomeloman
22nd November, 2012, 11:12 PM
I will try with eeprom 93c46 with these file.
I tryed with 1 and 2 exe files with no resolt. when i run 1.exe then i turn on bdm program says that my interface reqires older soft.
Then i run 2.exe and start program, everything looks normal but in the uper left corner is buton to swich power ON in bdm and that button is INACTIV i can't swich.