Kenworth / Peterbilt Schematic

[joelkenworth]

I would like to give out schematics as necessary. If you could post the system and year and model I should be able to help with most of your wiring schematic needs. I'll start with a couple of peterbilt diagrams.

[ricz]

Thank you very much, do you have any diagrams for the 2010 and newer Kw'a and Ptbs dash ecus, cab computers, etc.
Thanks again.

[dannyklx]

hi friend, try this link!

http://www.digital-kaos.co.uk/forums/f167/peterbilt-362-wiring-diagram-304243/

Give thanks button if it works!

Sorry for the bad English!

: T:

[joelkenworth]

Here is the 2010 mutiplex manual and the 2012 (t680) manual. It's the same manual for pete or Kenworth.

[pbateman]

looking for wiring diagram for 2012 T660 KW's thanks in advance for any help

[dannyklx]

Hi Joel Kenworth, wiring diagram will have to share Kenworth W900B Year 1995?
Thanks in advance.

[joelkenworth]

Sorry been awhile since I've been on. Could you guys tell me specifically which portion of the truck you want the diagrams for as each system is a separate diagram (Eg. Engine, ABS, HVAC all have different diagrams attached.)

[dannyklx]

Joelkenworth if possible wiring diagram of engine (Detroit s60) and ABS.

thanks in advance

[joelkenworth]

Here are your diagrams. I loaded many more Detroit S60 diagrams. There is a wabco meritor 4s/4m abs all for 1995. Make sure your abs is the same as I had to use a serial number I had on file to get the diagrams. See below. Archive worked for me, but not for others. I have put all the schematics seperately. Enjoy.

[sova]

Archive is damaged.
Please check it out.

[joelkenworth]

Okay, I'll put them on one at a time and try it.

[joelkenworth]

Here are some more.

[joelkenworth]

And more. (sorry hopefully my zip program will work better next time.

[joelkenworth]

Took me a long time to get all the diagrams together, but I think that I have all the diagrams for the 2012 T660. Hopefully my file works this time.

[joelkenworth]

Pete 379

Here are the diagrams you requested.

[Fool2cool]

Do you have any diagrams for a Peterbilt 210?

Thanks
Fool

[joelkenworth]

Here is the only diagrams I could find of the 210 model. Hopefully they help. Sorry it took so long, haven't Checked the forum to regularly.

[joelkenworth]

If you need a schematic and I don't get back to you right away please PM me as I don't get to this site every day. Thanks.

[ivan555]

diagrams for a Kenworth T2000 PLEASE PLEASE
THANKS

[sca.net]

Please Wiring diagrams for Kenworth T800 with Cummins ISX CM570 (2009) Engine.

Thanks for your contribution.

[joelkenworth]

Please Wiring diagrams for Kenworth T800 with Cummins ISX CM570 (2009) Engine.

Thanks for your contribution.


Here are the diagrams you asked for, hopefully the one you want is in here. Tried to give you anything to do with the engine and cab.

[joelkenworth]

diagrams for a Kenworth T2000 PLEASE PLEASE
THANKS


Could you be more specific please, there are alot of diagrams for the T2000 if you could specify year and what area of the truck eg. Engine, Hvac etc. Then it would be alot easier for me to help you. If you give me the last six of your vin then it is really easy. Thanks.

[ivan555]

Kenworth T2000 2009
Kenworth T2000 2004

[joelkenworth]

Okay, it will take me awhile to get all the diagrams for these years.

[joelkenworth]

Here are the diagrams you requested. I am going to emphasize again that the last six of the serial number makes it so much easier for me to find the diagrams. Kenworth changed the way you search diagrams. There are no more descriptions only diagram numbers, with the serial number then I can choose the diagrams for this particular truck. Anyways sorry about the rant, here are your diagrams, hope I got them all.

[vicente456]

friend can help me with diagrams of a Kenworth T800 serial number 706554 and 711319 thank you very much

[vicente456]

but may be too much to ask in Spanish

[joelkenworth]

but may be too much to ask in Spanish

Don't think I can get it in Spanish. I will get you the diagrams maybe Monday/Tuesday before I can get them on though.

[joelkenworth]

friend can help me with diagrams of a Kenworth T800 serial number 706554 and 711319 thank you very much


Here are the diagrams you requested. I could not find any in Spanish, sorry.

[ivan555]

friend can help me with diagrams of a Kenworth T600 And Kenworth T660

[trucks]

Hello,could you please help me out with schematics for Kenworth W900L VIN J267449 please? Thank you

[joelkenworth]

Hello,could you please help me out with schematics for Kenworth W900L VIN J267449 please? Thank you


Here should be all the diagrams you need for that Vin.

[joelkenworth]

friend can help me with diagrams of a Kenworth T600 And Kenworth T660


Last six of the VIN please.

[trucks]

Hello,could I also have for Kenworth W900 VIN J294555 please? Thank you

[joelkenworth]

Hello,could I also have for Kenworth W900 VIN J294555 please? Thank you

Here are the diagrams. The ABS diagram is not available yet, I may have the pre-release version stashed somewhere on my work computer, try to get it to you later. Here are the rest though.

[joelkenworth]

Here are the diagrams. The ABS diagram is not available yet, I may have the pre-release version stashed somewhere on my work computer, try to get it to you later. Here are the rest though.

Here is that ABS diagram, it is only a draft though.

[pbateman]

Thanks Joelkenworth for the T-660 diagram. And big shout out to all the Dk friends. It's been way to long left old job and got out of the fleet business and now qorking for detroit. So hopefully in the near furture will have lot of info to share. The company is great on they work on it all.

[Roy Suryadwiananda]

Hello joelkenworth (http://www.digital-kaos.co.uk/forums/members/300785-joelkenworth/) , please help for Kenworth C500 VIN 340636 complete with Allison GenIV. Thank you

[joelkenworth]

Hello joelkenworth (http://www.digital-kaos.co.uk/forums/members/300785-joelkenworth/) , please help for Kenworth C500 VIN 340636 complete with Allison GenIV. Thank you

Here are the diagrams you requested.

[Roy Suryadwiananda]

Here are the diagrams you requested.

Friend, thank you for your submission, whether it can be include with P94-1579 Allison 4th Gen B Cab, because the file is not included in your postings.
Once again thank you for your support.

[joelkenworth]

196656
Friend, thank you for your submission, whether it can be include with P94-1579 Allison 4th Gen B Cab, because the file is not included in your postings.
Once again thank you for your support. Sorry, I thought I had put all of them in. Here is the diagram you requested.

[Roy Suryadwiananda]

Thank friend, Good Day, :elefant::elefant::elefant::elefant:

[Roy Suryadwiananda]

Dear joelkenworth (http://www.digital-kaos.co.uk/forums/members/300785-joelkenworth/),
friend, asking for help again for Kenworth C500 and VIN 862955 complete with N14 Cummins Engine .
Thank for your concideration.

[Roy Suryadwiananda]

Dear all,
How another comrades, if it can please help us

[TDT]

DK friends, anyone know where I can get the software Electronic Service Analyst (ESA), thank you very much.

[Roy Suryadwiananda]

DK friends, anyone know where I can get the software Electronic Service Analyst (ESA), thank you very much.

Refer to : http://www.digital-kaos.co.uk/forums/f168/paccar-esa-electronic-service-analyst-kenworth-peterbilt-177455/

[GoodPuppy]

Hello, May I have diagrams for a 2007 T2000 Vin 171191. thx

[joelkenworth]

Here are your schematics 171191. 213915

[GoodPuppy]

Thank you!!! There are no references to to CECU? Do you have anything that reference wireing to and from the CECU? I have ESA and it's manual. thx, GoodPuppy

[joelkenworth]

As far as I know T2000 do not have CECU's. Attached is the T2000 electrical manual. Hope it helps.

[GoodPuppy]

THANK YOU!!! All paccar products have an icu/cecu starting in 2005.... THX, GoodPuppy

[cholmes729]

Looking for diagrams for a 07 T600 Vin number 7R630422

[joelkenworth]

Please help us with all Chassis/Cab Wiring Schematic for T800 VIN 1XKDD49X97R 169053, thanks and succes for you.

Here are the diagrams.
220345

[joelkenworth]

Looking for diagrams for a 07 T600 Vin number 7R630422

Please verify your vin comes up as 1994 W900.

[cholmes729]

Please verify your vin comes up as 1994 W900.

try this one

J205472

[Roy Suryadwiananda]

Here are the diagrams.
220345

All the required data has been was take, thank you very much for your contribution Sir.

[joelkenworth]

try this one

J205472

Here it is. 220749

[jackalfa]

Please can you help me the diagram for a peterbilt 386 BD124910 date mfg 08/2010, thanks...

[joelkenworth]

My peterbilt access is not quite as good as kw. I have attached the 2010 389, and 387 model schematics, as I couldn't find the 386.

226396226397

[Roy Suryadwiananda]

Please help someone there that has "Wiring Diagrams" for old Kenworth C500BR VIN S862955 , ESN 12008690 as follows:
R115-6336 DIAG-CUMMINS PLUS
R115-4494 DIAG-PWR DIST BOARD
R115-4490 DIAG-ENG SHUTDOWN
R115-4366 DIAG-16 WARNING LP MODULE
R115-5751 DIAG-ACC CIRCUITS
R115-4488 DIAG-CHARGE & START
R115-4435 DIAG-WARNING LAMP MODULE

Thank for your contribution.

[superc0]

hi joelkenworth you can help me with te engine wirig and cab accesories wiring of a t300 312065, thanks

[sparky21]

Hi Joelkenworth,

Do you have any wiring diagrams for a Kenworth K104 Year 2000 Vin#6F5000000YA420985
this truck has a C-15 CAT in it. THe circuits we are after are the parkbrake warning circuit and
diff oil temp circuits
Many thanks in advance

[joelkenworth]

Hello, I will try to answer all the requests for Diagrams quickly. To amateur 123 I need a model and year.

[joelkenworth]

Here are the diagrams you requested for 892955, the r115-6336 I couldn't get so I added a couple of other cummins kw diagrams.

[joelkenworth]

Hi Joelkenworth,

Do you have any wiring diagrams for a Kenworth K104 Year 2000 Vin#6F5000000YA420985
this truck has a C-15 CAT in it. THe circuits we are after are the parkbrake warning circuit and
diff oil temp circuits
Many thanks in advance

Here are all the diagrams.

[joelkenworth]

hi joelkenworth you can help me with te engine wirig and cab accesories wiring of a t300 312065, thanks

Here are your diagrams.

[joelkenworth]

Please PM me if you need a diagram and I don't respond within a couple of days. I don't make it to this site on a regular basis.

[joelkenworth]

853944 hvac schematic253691

[vicente456]

Hello, May I have diagrams for a 2015 T800 Vin 721033. thx

[joelkenworth]

Hello, May I have diagrams for a 2015 T800 Vin 721033. thx

Here are your diagrams.261899

[joelkenworth]

Please help someone there that has "Wiring Diagrams" fOR kenworth
t800 2005 FOR WIRING INFORMATION
PLEASE HELP ME WITH THIS kenworth DIAGRAM AS THIS TRUCK HAS BEEN A COLLISION

Last six of VIN pls.

[joelkenworth]

joel good night I need you to help me with a problem I have a 2013 kenworth t800 I need the wiring diagram
VIN F254736

Here are the diagrams for chassis 716882 as per pm.

[Roy Suryadwiananda]

Please help someone there that has "Wiring Diagrams" for old Kenworth C500AR VIN 1NK5L2TX2P, ESN 11657955 as follows:
R301-209, R115-2810, R115-1830, R115-1965, R115-2874, R115-1954, R115-1935, R115-2659, R115-1847, R115-2813, R115-1929, R115-2259, R115-3221, R115-3223, R115-1948, R115-1857, R115-2019, and for routing R414-99.
These diagram can help us to recondition the old my trucks, thank you for your contribution.

[mecanico]

Joel good nigth, please help with wiring . T800 2006 niv f 800808. thanks in advance

[joelkenworth]

Sorry to all I no longer have access to the diagrams for Peterbilt and kenworth.

[brasco90210]

271675 use this for vin 800808

[Roy Suryadwiananda]

Please help someone there that has "Wiring Diagrams" for old Kenworth C500AR VIN 1NK5L2TX2P, ESN 11657955 as follows:
R301-209, R115-2810, R115-1830, R115-1965, R115-2874, R115-1954, R115-1935, R115-2659, R115-1847, R115-2813, R115-1929, R115-2259, R115-3221, R115-3223, R115-1948, R115-1857, R115-2019, and for routing R414-99.
These diagram can help us to recondition the old my trucks, thank you for your contribution.


Please help comrades, thank for advance.

[Gilbe]

Please help comrades, thank for advance.
I found everything except the R301 file.

[GoodPuppy]

You have been and are so generous and selfless,

thx,

GoodPuppy

[jhon silva]

Hello, May I have diagrams for KW T800 VIN F705879 Thanks.

[Okltree04]

Is there anyway I can get a copy of these? My vin is 060830

[Okltree04]

Sorry. I need wiring diagrams for a kenworth t2000. Vin 060830. Need all cab schematics

[joelkenworth]

"Okltree04

Sorry. I need wiring diagrams for a kenworth t2000. Vin 060830. Need all cab schematics"

Here are the schematics you asked for.

[adamdragster]

thanks a lot

[kcox3973]

Hi joelkenworth, I have an engine swap coming up this week and I desperately need the diagram for a 2014 pete 388 as I'm pulling a paccar max 13 and after treatment system out and putting in a cat 15 from a 2006 Pete 387, thank you in advance!!!