PDA

View Full Version : 1999 MITSUBISHI GALANT IMMOBILIZER PROBLEM


ngakson2002
1st December, 2012, 08:13 PM
Hello Mate,

Wish to find out the solution that could be used to restore Starting on a 1999 MITSUBISHI GALANT which can not start following Battery that has been disconnected with the ignition ON
In fact car is using the 4C transponder chip which data is stored in the X24C01 fitted in the Misubishi Immobilizer box.

So far, i have tried the Battery reset procedure followed by the 35 minutes ignition On and no joy.
Please if some one experienced this problem before and find out the solution, he should kindly share with us.


Kind regards
luis12
2nd December, 2012, 04:07 AM
Check with scanner to access data and codes and post.
Zohar
2nd December, 2012, 10:29 AM
Post your dump from motor ECU (MH720x 128Kb). Reading/writing MCU is possible via Piasini or MMCFlasher.
ngakson2002
2nd December, 2012, 01:30 PM
Post your dump from motor ECU (MH720x 128Kb). Reading/writing MCU is possible via Piasini or MMCFlasher.

Thanks for your reply.Please how many pin is this MCU.and how can i identify it on the ECU printed board circuit.


kind regards