PDA

View Full Version : VW Passat CC 2010 VW10 5N0959655J 20 H13 51916



Alex789
5th December, 2012, 06:11 PM
Hello. Just tried to clear crash data from this airbag module - "VW Passat CC 2010 VW10 5N0959655J 20 H13 51916" and got the fault "Defective module", but without crash data. Can anybody check what was erased erroneously?

marek_kwk
5th December, 2012, 06:24 PM
Hello!

Here you are crashed and cleared to compare.

Regards
Marek

georgegt
4th February, 2013, 02:24 PM
can you send me trhe pass
Please

Many thanks

mitch2
4th February, 2013, 04:15 PM
your clear try and report
pass on PM

Alex789
4th February, 2013, 09:02 PM
your clear try and report
pass on PM

Thanks mate. I settled this question and forgot about it already.
Your dump will not work, because it's not fully cleared. It's not enough to correct range 1E40-1E9F only.
Anyway thanks again.

mitch2
4th February, 2013, 10:51 PM
Thanks mate. I settled this question and forgot about it already.
Your dump will not work, because it's not fully cleared. It's not enough to correct range 1E40-1E9F only.
Anyway thanks again.

Sorry but i made 10 ecus And works perfectly with this clear crash data not all dtcs but for that just i use diagnostic tool
Sorry if not usefull for you

Alex789
5th February, 2013, 06:35 AM
Sorry but i made 10 ecus And works perfectly with this clear crash data not all dtcs but for that just i use diagnostic tool
Sorry if not usefull for you

If you made 10 ECUs and checked that everything is OK, excluding errors, so you are right. I corrected a few places and got dump where there was not necessity to clear faults. It's not important if you have diagnostic tools. Thank you very much again.
Good luck.

super jumbe
5th February, 2013, 06:49 AM
Couldn?t understand why have pass on a airbag clear crash dump no 1 is going to nick the car for dump file!!!! http://www.digital-kaos.co.uk/forums/images/smilies/hmmmm.gif http://www.digital-kaos.co.uk/forums/images/smilies/hmmmm.gif

georgegt
15th February, 2013, 02:12 PM
Work to correct range 1E40-1E9F only but need diagnostic tool to erase error's