Toyota Aygo Keys

[jolor]

I have a Toyota Aygo 2008 that will not start. With Techstream gives me error B2799. In immo gives no errors, but it is certain that the car will not start. I read the keys in ZedBull and are good and with the following data:
Master key
PG1 33
PG2 42
PG3 IF3B8787

second key
PG1 53
PG2 42
PG3 02F0F013

Can anyone verify that these data are correct at the dump immo?

[keygargoil]

yes they are ok check you soldering and chip rotation and if auto press the brake

[marek_kwk]

Maybe you have to synchro immo with ECU. It's easy to do it using peugeot planet (Peugeot 107) or lexia (C1).

[jolor]

I have Lexia. How do I do that?

[marek_kwk]

Connect Aygo as a Citroen C1 or better Peugeot 107. In ECU is option matching ecu with immobox. It takes about half hour (You will see progress bar). Maybe it help.

[jolor]

Is necessary pin code?

[marek_kwk]

Don't need pin code.

I think it's the same like connecting pin4 with pin13 in OBD.

[jolor]

I've done this procedure with Lexia and failed. Any more suggestions? Is possible make this ecu virgin?

[keygargoil]

did you sort this out do you have a matching set of files immo and ecu

[z786]

i have same problem, tried 30 mins with pins 4 + 13 shorted then tried 5+13. still no go, any ideas? also the p/s light flashes randomly without anything being shorted

[rashid01]

What is error code show when dignose

[z786]

B2799 in engine management

[bram380]

B2799 is ecu have lost synchrone code to immo.

Can you post here ecu & immo dump?

[z786]

it lost code overnight, battery was good, iv shorted pin on 4+13 and 5+13 on obd, is there a way to check if ecu is ****ed?

[bram380]

If ecu is dead error B2799 won't be appear.

[gwee]

Maybe problem with steering lock.