View Full Version : AUDI A4 3L V6 TDI CABRIOLET
newgeniehex
6th December, 2012, 08:05 PM
HELLO
i must to repair this dash because some one have change the mileage and after i cannot see the mileage on the display
i have a message L 00 _3-3 IN THE DISPLAY
the car start normaly
i have buy a licence for repair the dash for my magic dash can but it don't work
some one have a good dump or repair my dump for this tacho
look the picture
thank in adavnce
yugo45
7th December, 2012, 01:09 AM
Cluster is in service mode.
Change the miles ( like put 100 miles more) with Dash Can and it should fix your problem.
With Vag Dash Can you can change mode , I am surprise that Dash Can does not have that option.
It happens a lot when people use cheap tool for RB8 dash.
NOTE:
Do not use other dump in this dash , it will destroy dash.
d2mike
7th December, 2012, 06:33 AM
Hi mate,
try and report.
Password via private message!
Cheers,
d2mike
newgeniehex
7th December, 2012, 08:59 PM
Cluster is in service mode.
Change the miles ( like put 100 miles more) with Dash Can and it should fix your problem.
With Vag Dash Can you can change mode , I am surprise that Dash Can does not have that option.
It happens a lot when people use cheap tool for RB8 dash.
NOTE:
Do not use other dump in this dash , it will destroy dash.
hello
thank my friend i have solved my problem!!
whit magic dash can
smok have find the solution
Push button 'Read Sec Block'. After few seconds dash restart and You see on display normal KM. in this moment You must Disconect Cable OBD from CAR. That is All. (You can't wait for finish all procedure - You must inetrrupt it in moment when on display You see normal KM)
B.R
Smok
work perfect
yugo45
8th December, 2012, 01:54 AM
I think if you let scan all the way it will correct as well.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.