Laguna 2 HC12 + Licznik 9.02

[Snh]

Hello there.
Just started to learning how to change KM's in Laguna and it is not as easy as i've think.

Got Licznik 9.02 and KKL interface. I've connected pin 1&2 on KKL (shorted) to pin 17 on dashboard, also +12V and ground from PC to KKL and to dashboard. When i try to read HC12 i got communication error.

What am i doing wrong? Or HC12 not possible via KKL?
Thanks in advance.

[markony79]

Hello there.
Just started to learning how to change KM's in Laguna and it is not as easy as i've think.

Got Licznik 9.02 and KKL interface. I've connected pin 1&2 on KKL (shorted) to pin 17 on dashboard, also +12V and ground from PC to KKL and to dashboard. When i try to read HC12 i got communication error.

What am i doing wrong? Or HC12 not possible via KKL?
Thanks in advance.

use KKL on R232, not on USB

[Snh]

use KKL on R232, not on USB
Was thinking about it, will try. Thank you.

[xtech]

for laguna is specjal adapter simply kkl have komunication problem with some cluster

[newgeniehex]

Hello there.
Just started to learning how to change KM's in Laguna and it is not as easy as i've think.

Got Licznik 9.02 and KKL interface. I've connected pin 1&2 on KKL (shorted) to pin 17 on dashboard, also +12V and ground from PC to KKL and to dashboard. When i try to read HC12 i got communication error.

What am i doing wrong? Or HC12 not possible via KKL?
Thanks in advance.
hello
you must to use micznick 4.7 for this tacho
9.2 is old software!!!

[Snh]

I dont see in 4.7 hc12 option so cant read.

[szuwarik]

in 4,7 is only laguna with hc08 to hc12 only programmer or other device for example diga... etc.

[PETAR]

this dash is very simple for any programmer
only 4 wiles
gnd
5v
reset
rx

[bodzio012]

This dash is simple but if you have any programmer or something else to hc12, write your city and maybe someody help you