PDA

View Full Version : NISSAN MARCH PIN CODE


datapage
8th December, 2012, 01:32 PM
programmer asks for password, need help
nissan 2008
Alex321
8th December, 2012, 03:55 PM
Not sure 7550
guillermemosz
8th December, 2012, 08:31 PM
I think this BCM uses a eprom RL66 (93C66)
datapage
10th December, 2012, 11:25 AM
I think this BCM uses a eprom RL66 (93C66)


bcm in 25c01
Mr_Fix
10th December, 2012, 05:51 PM
I think this BCM uses a eprom RL66 (93C66)

Yes. (at SL383454.JPG)
It is a pity that photos have disgusting quality...
datapage
12th December, 2012, 11:36 AM
I put the numbers of parts
keygargoil
13th December, 2012, 01:37 AM
the march has a 93c66 you cant miss it i have done loads
datapage
15th December, 2012, 03:04 PM
Today I found really opened bsm rl66.
I did several readings, C66, c56, c46.
can be password 5555.
guillermemosz
15th December, 2012, 07:25 PM
Thats is! RL66 is 93c66 but any of your readings are working, you need to desolder and read alone
keygargoil
16th December, 2012, 02:44 AM
login 2c2c
keygargoil
16th December, 2012, 02:45 AM
but you have read it in 8 bit rather than 16 bit so you file is a bad read
datapage
17th December, 2012, 02:53 PM
Read now 8b...
9685
guillermemosz
17th December, 2012, 06:50 PM
something is wrong with your reading
datapage
17th December, 2012, 07:45 PM
I have ELNEC BeeProg +
Mr_Fix
17th December, 2012, 10:26 PM
Besides it is necessary to have knowledge! ! !
guillermemosz
17th December, 2012, 10:39 PM
If you have another 93c66 eprom is possible to try with other dump i have some of them, i think the information of your eprom is corrupted
datapage
18th December, 2012, 11:10 AM
Besides it is necessary to have knowledge! ! !
Your comment does not help.
help or get out.
I do have a lot of knowledge, see my posts.
I'm helping a friend do'm not with the car, not with the parts. My friend is reading.
guillermemosz
18th December, 2012, 07:16 PM
The engine ECU is Siemens?
keygargoil
19th December, 2012, 03:05 AM
Read now 8b...
9685

try another reader or try in 8 and 16 bit
datapage
21st January, 2013, 11:33 AM
received new readings SOIC 8.
guillermemosz
21st January, 2013, 09:19 PM
Ok, your code is 1658, try it and post
datapage
31st January, 2013, 11:18 AM
password is correct, 1658.
Thank you all.

Special thanks to guillermemosz guillermemosz (http://www.digital-kaos.co.uk/forums/members/103177-guillermemosz/)
guillermemosz
31st January, 2013, 08:29 PM
congratulations!

B.R.
gwee
23rd February, 2013, 04:13 PM
For the 2010 March K13, read BCM from T300 and calculate pin for new code but code is wrong.

I think for the newer model, maybe only consult 3 can read the real BCM. Not sure, I will get consult 3 , check and report.
gwee
27th February, 2013, 09:27 PM
For the 2010 March K13, read BCM from T300 and calculate pin for new code but code is wrong.

I think for the newer model, maybe only consult 3 can read the real BCM. Not sure, I will get consult 3 , check and report.

Even the consult 3 could not program the key, I think I over estimated the NATS system, T300 can do the job, the problem is I used the wrong Smart key. For Nissan all smart key look the same.
leandroks
16th December, 2013, 07:50 PM
235250 8BIT
235247 16BIT

235266




Hi there, could any1 get me the pin code for nissan march 2013 with no smart key.
Thanks in advance


Leo
leandroks
17th December, 2013, 12:25 PM
Anyone????

Inside has a Barcodes *BZ6B8C1 DD14A*
castin
30th July, 2018, 01:34 PM
Tango sey FFFF. I think is wrong algo.