PDA

View Full Version : Advice for Eeprom flash reader



roman_auto
8th December, 2012, 08:15 PM
Hi all
need you advice for a good and cheap Flash reader like 29f400 and etc..

i heard the willen(think that is the name) is good.

Thanks for all

turborabbit
8th December, 2012, 08:20 PM
True USB GQ 3X EEPROM Flash Chip Programmer Supports All Willem ZIF Adapters | eBay (http://www.ebay.com/itm/TRUE-USB-GQ-3X-EEPROM-FLASH-CHIP-PROGRAMMER-SUPPORTS-ALL-WILLEM-ZIF-ADAPTERS-/110957292723?pt=UK_Sound_Vision_Other&hash=item19d591ecb3)

and you will need this adapter for PSOP-44 if you want to read/write 400BB/800BB

http://www.ebay.com/itm/Willem-Programmer-Adapter-PSOP44-AM29F800-28F-U21-/190457929297?pt=LH_DefaultDomain_0&hash=item2c582d5e51

Stanton
8th December, 2012, 08:25 PM
Batronix is a better option IMO...good solid high quality, neither my programmer or adaptors have once failed me.

turborabbit
8th December, 2012, 08:37 PM
Batronix is a better option IMO...good solid high quality, neither my programmer or adaptors have once failed me.
====
Sure, there are tons of high quality solutions.

roman_auto
8th December, 2012, 08:41 PM
the willen programmer in no good ? gq3x is better ?

turborabbit
8th December, 2012, 08:49 PM
the willen programmer in no good ? gq3x is better ?
====
The original willem is too old. It's good but it's too old.
As you may have noticed, our chinese friends call this "gq3x" also as "willem usb programmer".
Actually I suggested it to you as at least it was tested by me on many 400BB/800BB chips and never failed (as programmer). Weak spot are PSOP adapters you must be carefull with them and always clear well desoldered chips to make good contact.

racin-snake
8th December, 2012, 08:50 PM
the GQ4X has never failed me once although i replaced zif with a gold plated type one
great wee programmer for very little money !

cagatay87
8th December, 2012, 09:00 PM
i will suggest you top 3000. really good and stable...

danfos
8th December, 2012, 10:08 PM
I would recommend Beeprog.

Universal programmers | Elnec (http://www.elnec.com/products/universal-programmers/)

cagatay87
9th December, 2012, 09:00 PM
I would recommend Beeprog.

Universal programmers | Elnec (http://www.elnec.com/products/universal-programmers/)
i have elnec beeprog also.you can not compare them.beeprog is good also but its maybe 5 times expens***351;ve than top3000. and also no more advantage than top 3000

gedas8899
11th December, 2012, 01:49 PM
I use batronix48, exelent tool.

Baddog84
11th December, 2012, 03:52 PM
I use Elnec BeeProg+ and Galep 5

daniersms
11th December, 2012, 04:30 PM
:afraid:So you see you can make your choice------