View Full Version : Renault Clio immo problem
rocket ron
9th December, 2012, 12:33 AM
Please can anyone help. ??
Have a 2002 Renault Clio 1.2 12v engine code D4F 712 with MM ECU IAW-5NR2C5. I think it maybe corrupt. I have read the dump from the BSI and run it through the Zedbull. Gives me the 12 digit pin and allows me to make a chip. But it wont start the car. Does anybody have a working matching pair of files for the ECU and BSI that i can use to check the operation ??
Many Thanks in Advance
Rocket Ron
KILL_THE_IMMO
9th December, 2012, 12:11 PM
use a diag tool to see problem
klonone
9th December, 2012, 12:34 PM
rocket use tms374 decoder and remove immo
regards
rocket ron
9th December, 2012, 01:31 PM
Kolnone.
The MM IAW-5NR2C5 ECU is not in the list for the TMS374 decoder (or in my list - maybe incorrect) Have you ever done on this ECU before?
R-R,
leandroks
9th December, 2012, 02:09 PM
Virginise the bsi and program again with the same pin. Job donne
diga1
9th December, 2012, 02:35 PM
this ecu cant be done immo off. your problem is the key usualy the coil in the key gets faulty. can you read the key vith zed bul?
ahmed ful
9th December, 2012, 08:32 PM
yes tu peu le decoder
desouder le eepom 95160 DE ECU ET DEMARE SAN EEPROM
100 POUR 100 OK
aantara3000
9th December, 2012, 08:52 PM
desouder le eepom 95160 DE ECU ET DEMARE SAN EEPROM
100 POUR 100 OK
ninja123
9th December, 2012, 09:36 PM
what chip are you trying to program with zedbull? do you have ori or clone zed?
clone cant make pcf 7936 to work on this clio, take your pin code and program a remote key with pcf7946, use mvp t300 sbb etc to program and your done.
ninja
albertros
10th December, 2012, 10:07 PM
Hi,
isn't IAW-5NR2C5 a 1.2 16v? and shouldn't it be a C2 on that year?
So has this car ever run with this ecu? What was the immo led on the dash doing, if you have a fault replacing the dump(s) won't help.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.