pls how i read ews 3 d module bmw 61.35 4101593

[nokwueze]

pls friends who will help me on this ews 3 d module bmw 61.35 4101593
i have x progm
how do i read this chip

[bram380]

If mcu 0D46J select Immobilizers --> EWS3.
Use ews3 adapter.

If mcu 2D47J select MCU/MPU --> Motorola HC11 -->MC68HC11EA9(2D47J).
Remove mcu from ews & use PLCC52 adapter.

[abuuauto]

hi. which mcu and masket ?.but if it have yellow plug u can remove mcu and use adapter HC11E9/EA8 PLLCC52. and check masket number select and you will be able to read. thanks

[nokwueze]

If mcu 0D46J select Immobilizers --> EWS3.
Use ews3 adapter.

If mcu 2D47J select MCU/MPU --> Motorola HC11 -->MC68HC11EA9(2D47J).
Remove mcu from ews & use PLCC52 adapter.
thanks
is 0D46J can HCO5BX READ IT

[leandroks]

If u got carprog just connect the adaptor and sold the wire on the back. Job donne

[nokwueze]

If u got carprog just connect the adaptor and sold the wire on the back. Job donne
NO SIR I HAVE XPROGM CANNT IT DO IT

[yugo45]

X-prog has adapter as well.

[bearheroes]

for xprog follow bram's instructions

[bearheroes]

for xprog follow bram's instructions.

[nokwueze]

pls brams
the ews adapter is small socket where as the box is big, so i desoldered the ews chip so that i can read it the chips no way
i used HC11 TO READ THE CHIP
IS SAYING SILENT DEVICE

[bram380]

ews mcu 0D46J or 2D47J ?

[bram380]

For mcu 0D46J:
If you use on-board programming interface you must be set osciator to 5529600 Hz.

[nokwueze]

For mcu 0D46J:
If you use on-board programming interface you must be set osciator to 5529600 Hz.
worked
pls can u edit the file so that the old key can start the car

[bram380]

here clear dump:

[nokwueze]

ews3 d module

[bram380]

rolling code reset:

[brahimdiag]

terres non J'ai rover en panne PARCE Qu? le batterie d?charg?e en fain d'compt J'ai fel uu Autre batrier et les cosse etait ?zole int?r?t CE que me voila Vous secouriste Les FICHIER DE ?cu:grey: