i need ford focus 1.6tdci dpf off

[fcan]

8M51-12A650-XE 0281015242 THANKSS...

[assitutto]

your file off

[fcan]

thanks my friend but don't work

[J_amb_o]

Off by switch on this.

[flyins]

If you flash with mpps via obd be careful as can corrupt eprom, i did one last week and then needed to ids cal file

[assitutto]

Off by switch on this.

i made dpf off by switch
and this solution in 100% tested

[sepistar]

If you flash with mpps via obd be careful as can corrupt eprom, i did one last week and then needed to ids cal file

i have to do one today,as i want to write with mmps,will know what exactly is happen?you lost the injectors coding or something?
regards

[flyins]

Hi friend no didnt lose injector coding,(even though that can happen), it lost variant coding fault code "P1187 variant coding", i had wrote different remap to this car successfully three times with mpps, but a week later i wrote a file back to car and then i had engine malfunction, car still started but about every three to four starts of the car i got engine malfunction on lcd on dash with a bleep and bad acceleration. No mil light lit up though. When scanned got p1187, so then it needed to have calibration using ids. You must use genuine ids or GOOD clone to do this and the right calibration file for the ecu. Search on here for P1187 and you will see this has happened quite often. And yes i had good voltage to car battery using external voltage to battery.
Re wrote using FG galletto with dpf off file after calibration which wrote good

[skywoker]

Here your file, pass in PM. Careful writing process use gal2.

[twincam]

Try to look first at the date of previous post before posting yourself.

[jaelgti]

FAP need off
Volta and ecusafe are not good.
thanks
Greetings DK

[blazej1200]

FAP need off
Volta and ecusafe are not good.
thanks
Greetings DK

1E806D change from 01 to 00 (8bit)

[Rito]

i made dpf off by switch
and this solution in 100% tested

Switch is a software??
What you use for do fap?

[xanubysx]

One bit solution work ..on this ecu...

[jaelgti]

One bit solution work ..on this ecu...
What do you mean?
I do not understand
regards

[cavignac]

hello everyone
Here DPF off
good luck

[jaelgti]

1E806D change from 01 to 00 (8bit)

It seems that if it works,
but there is a problem:
if you step on the throttle pedal .... 3500rpm +/- the engine stops.
think you have to modify another map to eliminate this problem, ATTENTION IS VERY DANGEROUS!
The test is made ​​up 3 and up, asking the engine torque.
that more needs to be altered so that does not happen?


regards DK

[digi men]

i have seen ,someone said that is to recalibrate N75 , maybe is this a solution !

[jaelgti]

I will modify Modify overboost
give you the results.

[jaelgti]

I will modify Modify overboost
give you the results.

Well after modify this ok.

[digi men]

Hy
exelent, is it posibile that you give one solution to me ?
thanks in advance !

[jaelgti]

Hy
exelent, is it posibile that you give one solution to me ?
thanks in advance !

Hi what is your problem?
Greetings.