PDA

View Full Version : 2011 Corolla immo convermation



pe locksmiths
12th December, 2012, 02:50 PM
Hi DK Friends,

Please verify if I got the correct immo box from toyota corolla 2011. Found box on right hand side under streering colum.
Attached is box found.
I've got key from agents and need someone to add key to dump if possible. What do I need to read.

Thanks

bram380
12th December, 2012, 03:19 PM
immo box part no: 89780-xxxxx
read eeprom from immo box.
read key data.
post here these dump.

ttzag
12th December, 2012, 05:49 PM
How read key data please?

bram380
12th December, 2012, 06:10 PM
Read new key from agents with key reader/programmer.

pe locksmiths
13th December, 2012, 02:48 PM
immo box part no: 89780-xxxxx
read eeprom from immo box.
read key data.
post here these dump.

attached photo's of box. Can you please tell if this is 100% the box. Number on Toyota box is 89730-12120
If it is what do I read.
Also attached is original key data.
Thanks in advance

bram380
13th December, 2012, 04:04 PM
89730-12120 is theft warning/alarm module.

find box with code 89780-xxxxx

pe locksmiths
13th December, 2012, 04:24 PM
89730-12120 theft warning/alarm module.

this cars use smartkey system.
smartbox 89990-02050

Where will i find box.
Strip almost hole dash and can't see anything.
Please help

bram380
13th December, 2012, 04:30 PM
please info cars VIN
or
which cars type?

pe locksmiths
13th December, 2012, 04:41 PM
please info cars VIN
or
which cars type?

It's a toyota corolla 2011 model.
VIN: AHTLB58E503051497

bram380
13th December, 2012, 04:47 PM
immo box code 89780-12310
eeprom 93c66
read eeprom as 16bit & 8bit

see picture below...
immo box item no.1

pe locksmiths
13th December, 2012, 05:34 PM
immo box code 89780-12310
eeprom 93c66
read eeprom as 16bit & 8bit

see picture below...
immo box item no.1

What colour is the box........

drivesure
13th December, 2012, 07:21 PM
same box as in your pic - almost ,but you have to strip the top half of the dash off and in line with the rear view mirror against the firewall sits the box. we tooled a piece of steel to lodge the box loose. right at the bottom. wont be able to add the key in if it is g chip. you will need an original g-chip most likely to code. you cannot read all the info on g-chip to post for someone to help as it is 80-bit. it might be id70 but most likely a g - chip.