as read 9s12HY64 hyundai I10 2011

[hugos31]

Hello friends, please, indicate, how to proceed, to read s9s12HY64VLL 100-pin,,, attached some recent pictures ... I get my Original UPA v1.3,,,,,,, I want to guide me on how to connect the cables to the micro, soldier dash? or, by default ''ll have to desolder the 100-pin chip board? .... "" The goal is to post the dump that has 73,491 miles "" and I want ............ 40000 km ....... Please, help and connect the pins to read on the board, the microcontroller eprom

[hugos31]

http://img823.imageshack.us/img823/622/p1020325rr.jpg

[hugos31]

http://img40.imageshack.us/img40/5894/p1020328b.jpg http://img17.imageshack.us/img17/2582/p1020330k.jpg

[digimile]

hi
this has 6 pins at the back of the pcb like ford bdm pads....connect 4 wire and d-flash it and read it save it and then u see km location at 2 places then first is km for display.....thanks

[hugos31]

http://img13.imageshack.us/img13/1508/p1020329v.jpg please. Explain the connection

[claudio35]

http://www.digital-kaos.co.uk/forums/f174/hyundai-i-10-2011-a-243655/

http://www.digital-kaos.co.uk/forums/f174/hyundai-i10-9s12hy64-259202/

[solitaire]

with original x-prog You can read 0M34S
AUTH-0024-4 MC9S12HA/HY/P (http://www.eldb.eu/index.php?route=product/product&path=35&product_id=78)

[hugos31]

with original x-prog You can read 0M34S
AUTH-0024-4 MC9S12HA/HY/P (http://www.eldb.eu/index.php?route=product/product&path=35&product_id=78)
I have only UPA original , read d-flash, i need diagram conection

[cokolo]

Why don't connect like in user manual
:wink:

[hugos31]

Why don't connect like in user manual
:wink:
excuse my ignorance. where I can get the user manual?. thanks

[cokolo]

When you start UPA sw in HELP menu you have Contents .

[hugos31]

here is the dump with 73491km. please need 40000 km. or please indicate which would be to modify the lines,,, thanks http://img853.imageshack.us/img853/6906/p1020338q.jpg http://img831.imageshack.us/img831/2563/p1020341xx.jpg

[hugos31]

fffffffffffffffffffff

[sofy]

Hello.
anyone sucsessed to read this MCU by UPA?...
connections pls and also pinout to power up.
thanks
regards

[zckariya70]

Hello.
anyone sucsessed to read this MCU by UPA?...
connections pls and also pinout to power up.
thanks
regards
yes i did many in upa it is D-Flash memory u can read and write with that u can search in Dk for power up and pinout is also posted here

[zckariya70]

here is the dump with 73491km. please need 40000 km. or please indicate which would be to modify the lines,,, thanks http://img853.imageshack.us/img853/6906/p1020338q.jpg http://img831.imageshack.us/img831/2563/p1020341xx.jpg
u can see 23 D3 is the algo chage it full to 13 8F u will get 40000

[ibratex]

hello mate can you explain the connections by colors
since the pic is not very clear please ..thanks
vss= ????
vcc= ????
reset=????
bkgd=????

[vageric]

hello mate can you explain the connections by colors
since the pic is not very clear please ..thanks
vss= ????
vcc= ????
reset=????
bkgd=????

vss= black
vcc= +5v=red
reset=bleu
bkgd=yellow
someone correct me if im wrong!

[trevormaharaj]

hi everyone can sumone please help change the mileage for me thanks in advance
its now on 43282 km i want to make it 67000 km
i read it with upa 9s12hy64

[zckariya70]

hi everyone can sumone please help change the mileage for me thanks in advance
its now on 43282 km i want to make it 67000 km
i read it with upa 9s12hy64


dump is not good mate read in "D" flash memory and post we will help u

[vageric]

dump is not good mate read in "D" flash memory and post we will help u

i think dump is ok.
OP read the whole flash looks like.
mileage from 87A till AEC

[jomberykaso]

343395
Black- Gnd
Red - 5 volt
Green- reset
Yellow-Bkgd

this picture is not mine, zckariya70 (http://www.digital-kaos.co.uk/forums/member.php/405360-zckariya70) 's pic

[zckariya70]

i think dump is ok.
OP read the whole flash looks like.
mileage from 87A till AEC
Veryfy with another dump then u see the difference . The dump is not good

[CR10]

hello if you can help me I'm trying to read a 9s12hy64 with upa usb but I do not see that model, it only appears 9s12hz64 and 9s12xd64 ... thanks

[trevormaharaj]

hi can anyone please recalibrate this mileage for me
i10
9s12hy64
old km-63043
new- 60200
thanks in advance

[zckariya70]

Here..............

[__nero__]

I ask for verifications of the reading
whether well it is read out

original course 151000 are needed 97000

[zckariya70]

I ask for verifications of the reading
whether well it is read out

original course 151000 are needed 97000



Yes here.........................ur dump Ok

[Mvt]

hyundai i10 2013

hi everyone can someone please help change the mileage for me thanks in advance
its now on 172 546km 969012 i want to make it 152000 km

thanks

[zxmiguel]

leer eeprom 24c16

[Mvt]

no eeprom only micro processor

[zckariya70]

hyundai i10 2013

hi everyone can someone please help change the mileage for me thanks in advance
its now on 172 546km 969012 i want to make it 152000 km

thanks



If u still need help? Here is the file for u ....................................

[sanchos]

Hello
i need 120100
now is 225...
Best Regards

[jomberykaso]

Hello
i need 120100
now is 225...
Best Regards


next time make your own thread

[sanchos]

Thank You .
ps. I made it but ..... no answer :)))))