bmw dme ms43 renew [Sitemap]

View Full Version : bmw dme ms43 renew

automatemad

13th December, 2012, 10:35 AM

hi guys

need renew pliz

5wk90014

dump is attached

regards

bram380

13th December, 2012, 10:58 AM

ms43 dump:

automatemad

13th December, 2012, 06:04 PM

thanks will report back

automatemad

14th December, 2012, 04:35 PM

hi

the first ecu refuse to communicate now

i have a second ecu with 29f200 (dme 1 430 940)

are you able to renew this one

regards

automatemad

14th December, 2012, 04:43 PM

hi

sorry the first ecu was wrong for that car the second is the right one

regards

bram380

14th December, 2012, 05:30 PM

here precode dumps:
BOSCH 0261204420 26RT5134
DME 1430940
BMW #1430122 7503298

mcgywer

20th August, 2013, 01:28 PM

Hi,
need isn code for eWS and ECu to make synchro. Can i make synchro with AVDI?
In car i only get communication with DME.
Need to replace ECU old is fatal.

Thanks in advanced
Mat

mcgywer

20th August, 2013, 05:27 PM

Any help?

Can anyone change isn in ecu?

Why i don't have communication with EWS?

Regards
Mat

mcgywer

20th August, 2013, 06:09 PM

Hi,
can anyone virgin my ecu?

Vin of car:
WBAAL11040JN27529

Thanks in advanced
Mat

mcgywer

22nd August, 2013, 02:22 PM

Hi,
here is working EWS and DME.

DME DME1430940
EWS 3

DOUGLASDL

23rd August, 2013, 01:59 AM

here precode dumps:
BOSCH 0261204420 26RT5134
DME 1430940
BMW #1430122 7503298
hello friends I have a BMW 318 ti 1997 will be the year that has how to make immo off
from already thank you very much

mrchip

1st January, 2020, 03:37 PM

hello,,happy new year to all
0261204420 DME1 430 940, i need to clone this ecu,,, just swap flash( 29f200 ) enough or need more?
thanks

Lambda1

1st January, 2020, 04:10 PM

yes swap and sync with inpa

mrchip

2nd January, 2020, 12:32 AM

yes swap and sync with inpa
car is far a way from me,, just swap Flash is not enogh ? need to realy sync with inpa ? because all immo data are in flash
thanks

Lambda1

2nd January, 2020, 09:52 AM

you cant read, write flash full via obd... so desolder needen.
sync also needen, wouldnt run without. Told you customer they should sync after or workshop do.

mrchip

2nd January, 2020, 06:12 PM

you cant read, write flash full via obd... so desolder needen.
sync also needen, wouldnt run without. Told you customer they should sync after or workshop do.
I can desolder Ori 29f200 flash and solder back on Donor ECU, no problem ,,,in this case need still sync or all is OK ?
I told to customer that he send me also EWS module,, if I read EWS and ecu flash dump can you sync dumps ? then I write it in to donor ecu, customer dont have tools to sync it