PDA

View Full Version : BMW X5 2005 programming help



ajman5252
14th December, 2012, 04:02 PM
Hello DK friends

I have customer coming after 2 days who has BMW 2005 X5. I have seen the key, it is 2 track key. he needs a spare one.
I have AK90+. Does anyone know that this car can be programmed with Ak90, Does it have EWS system??
Also,
1. Which EWS does it use. Is it EWS 4or ews 3?
2. Which mask is in MCU...Secured or not??
3.where is EWS located? under dashboard or steering column??

Advance Thankssss and for helping me out

ajman5252
14th December, 2012, 09:38 PM
anyone pls??

ajman5252
15th December, 2012, 02:10 PM
anyone again pls??

JOHNCICY
15th December, 2012, 02:19 PM
Hello DK friends

I have customer coming after 2 days who has BMW 2005 X5. I have seen the key, it is 2 track key. he needs a spare one.
I have AK90+. Does anyone know that this car can be programmed with Ak90, Does it have EWS system??
Also,
1. Which EWS does it use. Is it EWS 4or ews 3?
2. Which mask is in MCU...Secured or not??
3.where is EWS located? under dashboard or steering column??

Advance Thankssss and for helping me out
POST VIN NUMBER

Fallen
15th December, 2012, 02:25 PM
Ews 4.3 located above pedals on the fire wall. Ak90 can do this but you must solder correctly or you will wipe it.

SAHAM ELECTRONIC
15th December, 2012, 02:29 PM
if EWS4 not read mcu in circuit

ajman5252
15th December, 2012, 05:28 PM
POST VIN NUMBER

vin number: WBAFA91045LD77107

ajman5252
15th December, 2012, 05:54 PM
Ews 4.3 located above pedals on the fire wall. Ak90 can do this but you must solder correctly or you will wipe it.

Thank you Fallen for the info

But i checked the the picture provided by AK90 where it says to solder cables in 6 different location with respect to colours
Acc top the picture:-
Location1 ---red colour
location 2 ----white
location 3---green
location 4 ---yellow
location 5 ---purple
location 6 ----black wire

but the funny thing is, the colour codes are different in wire set and picture. And this is same for all AK90 unit produced till now.

Foe ex: picture says solder location 2 with white, but in reality AK90 cable doesnt even have a white cable or even black wire too!!!
check attached pics!!
So does anyone know the right wiring diagram??
I wonder that has anyone noticed it yet??

Fallen
15th December, 2012, 10:27 PM
Yeah, from memory the colour coding does not match but the numbers should match up. 1 is the red cable on your ak90.

It's best to get a couple of practise ews units of different types. The place to learn is not on a customers car!

ajman5252
16th December, 2012, 08:39 AM
Yeah, from memory the colour coding does not match but the numbers should match up. 1 is the red cable on your ak90.

It's best to get a couple of practise ews units of different types. The place to learn is not on a customers car!

Thanks a lot , now i got it..
i did search for this type EWS in all scrapyard, but they dont have any .... becoz they say it too early for this kind of car to reach at scarpyard

keygargoil
22nd December, 2012, 09:23 PM
i have done a few x5 that have had ews3 in it so i would check if i were you

labusas
23rd December, 2012, 03:14 AM
yes, still EWS3+