Mercedes Vito 2006 ezs

[SDO]

hello
i have a 2006 Vito. EZS micro picture is attached, could someoneplease tell me how to read this micro.
thanks
steve

[enigmauk]

HC908... use ETL, XPROG-M

[looly]

HC908... use ETL, XPROG-M

And a SECURED 908!

[enigmauk]

Correct :)

[SDO]

can Smelecom DSP3 HC908 adapter read it onboard ?
thanks

[enigmauk]

I would have said yes to that, only your PDF for DSP3 will say for sure.

[batandball]

try this picture
i dont know if it does secure one on the board

[SDO]

I have already tried the above points, in circuit, didn't work, will desolder and try doing it onboard now, but would be reassuring if someone could confirm if dsp3 does them or no, because the mask is not available in the list

[batandball]

smelecom as got it on dsp3 machine unsecured on the board Motorola adaptor, secure off the board if you have 908 adaptor

[looly]

Another member was able to read/write to it using 1L52H maskset option, so if smelecom has this mask in their list it may be worth trying. Take a look at this link..
http://www.digital-kaos.co.uk/forums/f174/vito-2007-ezs-260651/

[SDO]

thanks guys, successfully read and edited. thanks everyone for your help. DSP3 can read and write with 908 adapter, have to desolder the micro.