Mitsubishi L200 airbag crash data clear

[VTS_Tibi]

Hi Guys,

I have a Mitsubishi L200 here with crash data stored in the airbag ECU.

8635A 231
DPSBC
W2T64974

JX0914011

It has a 93C76 EEPROM inside. I attached the original dump.

Please help me to clear the crash data :)

Regards,

Tibi

[badenaleks]

Clear 100%

[VTS_Tibi]

The file worked perfectly! :) No DTC in airbag.


Not airbag related, but the ABS light is constantly on, showing two faults which can not be erased. All live data represent the moment of the crash.

G sensor and yaw-rate sensor show a constant value, like 29m/s^2 and 129?/s.

Is it possible that crash data is also stored in the ABS, just like in the airbag?

[badenaleks]

No pillows are not associated with remote L200 sometimes need to do a road test and only then try to erase the mistakes of ABS !!!

[VTS_Tibi]

What do you mean under road test? Simply go for a drive and then try to erase faults?

[badenaleks]

what numbers of errors?

[VTS_Tibi]

Two errors but I can't recally what are they exactly. Will test again and report back.

[badenaleks]

Pillow block near a sensor G/Y, can you install it wrong or screwed?For all! Sensor has a direction forward movement! And the sensor must be calibrated!

[VTS_Tibi]

Thanks for the pics! I only received the airbag ECU, and now carried out a test on the car. The whole other work was done by the panel beaters.

I'll ask them if they removed the sensor or not, but I could not carry out a reprogramming with Autocom.

So it may be a trip to Mitsubishi,

[badenaleks]

ABS fault need not be discussed in section AIRBAG , a topic in another section!