View Full Version : GALLETTO 2 MASTER + IAW 59F.M3 ???????
ChipDoctor
19th December, 2012, 09:14 PM
Hello guys
I want to know if i can read and write with galletto 2 master ecu 59F from punto 1.2
Works with both cylinders and I want to write the file virgin to repair the problem i think !!!
Encountered a problem and want to know how i can write virgin file on this ecu 59F
Thanks!!!
gezame
20th December, 2012, 03:48 AM
Hi
This is typical problem in this ecu, but write virgin file do not solve this problem.
You need ecu open and fix solder.
Br.
ChipDoctor
20th December, 2012, 11:09 AM
Hi
This is typical problem in this ecu, but write virgin file do not solve this problem.
You need ecu open and fix solder.
Br.
Hello
I have open ecu 59F but i don't know where is the problem
Apart from the virgin file
You have photo or any information where is the problem in the PCB???
Thanks
gezame
21st December, 2012, 03:18 AM
Hi
Yes, no problem:
http://www.digital-kaos.co.uk/forums/f175/magneti-marelli-iaw59f-repair-310278/#post1809131
Regards.
ChipDoctor
21st December, 2012, 10:15 PM
Thank you my friend
If you have more information about of the repair of the board 59F and you can send me please
I know very few things and I want to deal with the repair of this ecu 59F
Best Regards!!!!
gezame
22nd December, 2012, 08:39 PM
Hi
usually, always a problem with welds-soldering.
Br.
ChipDoctor
22nd December, 2012, 09:10 PM
Hi
usually, always a problem with welds-soldering.
Br.
Thanks my friend for the help
javilette
23rd December, 2012, 04:50 PM
galletto original works whith this ecu read and wirte by k line (only flash ) but code and decode dont works tested
ChipDoctor
23rd December, 2012, 05:52 PM
galletto original works whith this ecu read and wirte by k line (only flash ) but code and decode dont works testedOriginal galletto very expensive
tatop
23rd December, 2012, 06:17 PM
galletto 1250 work very well with this ecu
only 15$
ChipDoctor
23rd December, 2012, 06:20 PM
galletto 1250 work very well with this ecu
only 15$
and galletto master can not work
It is funny
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.