moterized dish prob

[harryharris]

all of a sudden my dish wont go to 28.2 was watching it tuned to 19.2 tried to go bag & got tune failed it will go down to 13 e eveen 30w but it wont go up to 28.2 any help appreciated

[Manic01]

Make sure east limits not set 19.2e

[harryharris]

done that got 28.2e back but now got tuneing issues it does not find any transponders after 11680 but it has no trouble on transponers higher than that on 19.2

[Manic01]

Make sure lnb is set to 9750-10600 universal

[harryharris]

yep thats what its set at still no joy any thing else you think i should try am willing to giv anything a go must be something minor just cant find it

[ascouser]

what motor have you got

[ramjet]

check the lnb is set to universal and also check the 22 khz tone is ON or AUTO for the satellite you have troubles with

[mdt]

are you certain your on 28.2e? regards mdt

[harryharris]

i am on 28.2 1 get all the channels upto 11680 just tried rescaning the whole sat & it finds no more channels after 11680 it shows the trasponders but finds no channels

[ramjet]

i am on 28.2 1 get all the channels upto 11680 just tried rescaning the whole sat & it finds no more channels after 11680 it shows the trasponders but finds no channels

in which case you seem to have hit either your box`s transponder limit or its maximum channel limit

delete the rubbish and try again ;)

[harryharris]

it cant be the transponder limit i can get all of 19.2 will try knocking off some of the dross & see if that helps

[harryharris]

no thats not it knocked off a load of channels & it stops finding any after 11680h

[ramjet]

no thats not it knocked off a load of channels & it stops finding any after 11680h

what box is it ?

have you tried the other one too ?

[harryharris]

its a DM800 HD PVR the technomate picks up the transponders but not the codes for sly

[ramjet]

probably one of the dm800 files needs updating, possibly an xml file

check the dreambox forums for more info, and backup your list and try a catseye list instead using dreamboxedit or Vucc

[harryharris]

will give it a try was working thi morning

[cgscott]

Just manually search a transponder higher than the one it stops at. See what happens.

[ramjet]

check it on a direct sly feed from a fixed sly dish

if it still fails the problem lies with the dreambox or its image or its files

then maybe get this thread moved to the dm section as it doesnt seem to be a motor or sat issue but a dm problem

I would also check you dont have any wifi or dect objects like routers or dect phones nearby causing interference

I would also do what I said about a replacement sat list like catseyes