View Full Version : Toyota Corolla 2011
pe locksmiths
21st December, 2012, 11:17 AM
Hi Friends,
Can someone be so kind and write this key data read by z-bull to the dump attached.
Toyota Corolla 2011 with all keys lost.
Got original key from agents.
Thanks in advance.
Key Data: Pg1 Pg2 Pg3 Pg4
B3 D6 45/12/60/82 xx/xx/xx/xx/xx
All pages Lck
Transponder Model: DST+
Response: 3429B4 - 789E30
bram380
21st December, 2012, 11:22 AM
this immo box need transponder 80 bit with PG1=36, 56 or 96
pe locksmiths
21st December, 2012, 11:45 AM
this immo box need transponder 80 bit with PG1=36, 56 or 96
Hi Bram,
I ordered this key from agents with vin number.
How will I get right key.
Thanks again:afraid:
bram380
21st December, 2012, 12:00 PM
Transponder 80bit with stamp "G" on blade key.
pe locksmiths
21st December, 2012, 12:19 PM
this immo box need transponder 80 bit with PG1=36, 56 or 96
Can I generate these chips
bram380
21st December, 2012, 12:38 PM
Can I generate these chips
No for G-chip 80bit
Get G-chip from any source.
keygargoil
22nd December, 2012, 11:22 PM
Hi Friends,
Can someone be so kind and write this key data read by z-bull to the dump attached.
Toyota Corolla 2011 with all keys lost.
Got original key from agents.
Thanks in advance.
Key Data: Pg1 Pg2 Pg3 Pg4
B3 D6 45/12/60/82 xx/xx/xx/xx/xx
All pages Lck
Transponder Model: DST+
Response: 3429B4 - 789E30
your pages need to be 37 or 57 for page 1 its a 80 bit 4d70 with a dot instead of a g on the blade
pe locksmiths
7th January, 2013, 08:33 AM
No for G-chip 80bit
Get G-chip from any source.
Hi & Compliments to all,
Still busy with this car.
Got a key from second hand dealer. A friend wrote the key to dump using tango.
Read and Reconize 100%. Copied key to tpx 2.
Took box back pluged it in and nothing. Security light still flashes.
Do I need to bridge obd pin 4 & 13 or what could be wrong now.
Thanks:help:
rivalryan
7th January, 2013, 10:03 AM
if it is deisel yes
pe locksmiths
7th January, 2013, 10:04 AM
if it is deisel yes
Not diesel mate.
Any help
koncimobil
7th January, 2013, 11:34 AM
Hi & Compliments to all,
Still busy with this car.
Got a key from second hand dealer. A friend wrote the key to dump using tango.
Read and Reconize 100%. Copied key to tpx 2.
Took box back pluged it in and nothing. Security light still flashes.
Do I need to bridge obd pin 4 & 13 or what could be wrong now.
Thanks:help:
I'm not sure dealer key is G-key.
Impossible to copy g-key tp tpx2.
It's 80 bit.
You need g-key to start the cars.
cjawahir
7th January, 2013, 02:07 PM
I'm not sure dealer key is G-key.
Impossible to copy g-key tp tpx2.
It's 80 bit.
You need g-key to start the cars.
this is true cannot copy g key .
also as bram 380 said you need the correct g type key .
cj
pe locksmiths
7th January, 2013, 03:21 PM
this immo box need transponder 80 bit with PG1=36, 56 or 96
Okay can someone please write this key data to immo file.
Key Data:
Pg1=36
Pg2=C5
Pg3=72,E3,04,81
Pg4=xx,xx,xx,xx
All pages locked
Thanks
koncimobil
7th January, 2013, 03:55 PM
Immo part number?
try it....
Corolla.ok.100% (https://www.rapidshare.com/files/45542278/Corolla%202011%20andries.south-africa.rar)
pe locksmiths
7th January, 2013, 08:25 PM
Immo part number?
try it....
Corolla.ok.100% (https://www.rapidshare.com/files/45542278/Corolla%202011%20andries.south-africa.rar)
I'll post immo part numbber tomorrow.
Big thanks and will report back.
Do I just plug box back and start or must I do anything before try to start.
koncimobil
7th January, 2013, 08:38 PM
write above dump, plug immo box & start the cars.
pe locksmiths
8th January, 2013, 07:08 AM
Immo part number?
try it....
Corolla.ok.100% (https://www.rapidshare.com/files/45542278/Corolla%202011%20andries.south-africa.rar)
Toyota 89780 - 123000:jiggin:
pe locksmiths
8th January, 2013, 08:47 AM
write above dump, plug immo box & start the cars.
Big thanks to koncimobil.
Dump is 100%
Car started first time and idled but when I switched it off and tried again nothing and immo light is also no longer flashing.
Could it be a fuse or what must I look for.
Thanks:help:
koncimobil
8th January, 2013, 11:10 AM
First check fuse.
2nd diagnostics the cars to see what error/dtc.
It's error dct B27xx B28xx or .....
You can try to short pin 4 & 13 on obd port within 35 minutes.
pe locksmiths
8th January, 2013, 03:25 PM
First check fuse.
2nd diagnostics the cars to see what error/dtc.
It's error dct B27xx B28xx or .....
You can try to short pin 4 & 13 on obd port within 35 minutes.
Big thanks again to koncimobil for dump that worked 100%.
Car start and customer is happy.
Thanks to all that was willing to help.:jiggin:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.