PDA

View Full Version : Original kessv2 and edc17 vag



swingman26
22nd December, 2012, 12:18 PM
Hi,

I have one kessv2 original. Have golf mk6 with edc17 from 05/2009.
This ecu have tunning protection or not for doing through obd2 ?

How i can check ?

drakov
22nd December, 2012, 12:48 PM
I am sure EDC17 is via BDM only

carmageddon
22nd December, 2012, 02:36 PM
Hi,

I have one kessv2 original. Have golf mk6 with edc17 from 05/2009.
This ecu have tunning protection or not for doing through obd2 ?

How i can check ?

write here your identification from ecu, all numbers you have

carmageddon
22nd December, 2012, 02:37 PM
I am sure EDC17 is via BDM only

edc17 with BDM????????????


only boot mode not bdm!

gezame
22nd December, 2012, 08:53 PM
edc17 with BDM????????????


only boot mode not bdm!

Hi friend
Or OBD, cmd can OBD.
Br

glk96000
22nd December, 2012, 09:31 PM
Hi,

I have one kessv2 original. Have golf mk6 with edc17 from 05/2009.
This ecu have tunning protection or not for doing through obd2 ?

How i can check ?

Hi

D?pend if vw do update of ecu
If no update obd
If update boot mode

jnoroeste
24th December, 2012, 12:10 AM
Hi,

I have one kessv2 original. Have golf mk6 with edc17 from 05/2009.
This ecu have tunning protection or not for doing through obd2 ?

How i can check ?


Hi M8,
No through eobd!
But you can do it on bench, but you need tricore protocols been activated and wires, the other way is ktag (BDM).

Why you do not check into kess help, or ask to alientech?

Regards.

chucky69
24th December, 2012, 12:42 PM
Kess in 90% tell you in identification if protection is enabled, so you can try it over obd...but there is little risk that you can block ecu - or make it by tricore

clio_williams
29th December, 2012, 08:05 PM
kess does not start reading if it has tp, it says "ecu not found". try directly reading and see :D

eprommazza
30th December, 2012, 09:56 AM
Hi,

I have one kessv2 original. Have golf mk6 with edc17 from 05/2009.
This ecu have tunning protection or not for doing through obd2 ?

How i can check ?

first 2010 can do in obd

best regards

k0mpresd
30th December, 2012, 09:11 PM
tprot v2. x17 can read this ecu via obd.

autobamm
30th December, 2012, 10:26 PM
also byteshooter can do it by OBD

swingman26
31st December, 2012, 08:33 AM
Finaly, i do this car through obd2 with kess v2. Car is from 09/2009 but made in 05/2009. Ecu not protected.

Thanks at all.

jnoroeste
2nd January, 2013, 06:27 PM
Finaly, i do this car through obd2 with kess v2. Car is from 09/2009 but made in 05/2009. Ecu not protected.

Thanks at all.

Hi M8,

Beware for next cars, because from same date will be t-protected if sofware was updated at dealer!

Regards.

enigmauk
2nd January, 2013, 09:00 PM
So how can we find tprot without locking the Ecu?

jnoroeste
5th January, 2013, 01:27 AM
Hi M8,

Yes but only in first models no updated by dealers!
Over OBD without genuine tools is a fake lotto!!

Make your work sure!

Regards.

atomiczen
6th January, 2013, 02:28 AM
So how can we find tprot without locking the Ecu?
Kess v2 while connect for ID, tell you if it's tprot8/10 or not