ADT alarms

[cockney]

Morning guys and girls . anybody know how to delete the codes on the accord alrams . my battery went flat so changed it and now the alram is not working. Have spoken to adt they said I need the anticode but they want ?120.00 to do it . its flashing 45678 ? :call2:

[ukHooligan]

I know a subby who does a lot of work for A*T I can fish out his number and give him a call on Monday if you don't get it sorted by then m8t

[cockney]

thanks mate let me know what he says .

[ukHooligan]

I assume this is a bell only and not a monitored system you are on about?

Just some codes for you to try first
2323
6363
1122

[cockney]

cheers for your help .it was monitored but no longer . have tried your codes but no joy .

[ukHooligan]

"To default the Master User Code and the Engineer Code press the * and # keys together within five seconds of power up. Hold both keys down for approximately two seconds until two beeps are emited. The Engineer Code defaults to 9090 and the Master Code to 1234"
You can also try the 9090 code first if it as not been set by the engineer.

[cockney]

"To default the Master User Code and the Engineer Code press the * and # keys together within five seconds of power up. Hold both keys down for approximately two seconds until two beeps are emited. The Engineer Code defaults to 9090 and the Master Code to 1234"
You can also try the 9090 code first if it as not been set by the engineer.

thanks i will give it a try ?

[cockney]

Ok . code error is no longer flashing but is now flashing a spanner . engineer mode .

[ukHooligan]

If it will help i can get a copy of the engineers manual for you.

[cockney]

have got user instructions do the engineers have different manuals

[cockney]

If it will help i can get a copy of the engineers manual for you.

if you can that would be great .

[ukHooligan]

Have both here will pdf them now

[ukHooligan]

I have uploaded them to here (http://www.4shared.com/file/48204560/746491d9/Alarm_Manuals.html)

[cockney]

top man I will let you know how i get on . Thanks again

[wazzer]

If you get stuck give me a shout, cos I used to rip them out for fun when i worked for initial. :cool:

[cockney]

thanks mate got it sorted , now working again

[dutto]

I have uploaded them to here (http://www.4shared.com/file/48204560/746491d9/Alarm_Manuals.html)
Would be most grateful for these .pdf's. I'm struggling with ADT installed Galaxy, which I've had transferred to Bell Only. Hope you are able oblige, it's a while since you posted.

[JFELEC]

Guys,

I have one of these ADT Accord alarms that I have been working on for a customer of mine.
I am an electrician and apart from taking a 1 day training course in alarms, I have not really had a great deal of experience with these types of systems. They do seem fairly straightforward from a wiring point of view.
She had a low battery and I changed it, muddled my way around the comprehensive instruction book which she provided and sort of have it running.

My problem is out of the 3 different alarm setting modes, Full, Part and Night, I can not get the system to set on FULL.

Both the other modes work and I have checked each sensor on the 6 zone system by doing a walk through test.
That I am aware of, it is no longer a monitored system, or is out of contract.

Anyone experienced this issue please and I would be very grateful for some possible solutions.

Julian

[BigLid]

the engineer code in Northern Ireland is 8778