PDA

View Full Version : AUDO A1 2012


dashtec
31st December, 2012, 08:51 PM
TRIED WITH DP3 NO USE, WILL READ ORIGINAL MILE BUT WHEN IT TRIES TO CHANGE, FREEZES AFTER 100%

EEPROM 24C64, ATTACHED , CURRENT MILES 3093 NEED 1750MILES

THERE IS OPTION ON DP3 KM FROM FILE NOT SURE WHAT THAT IS FOR.

CAN ANY1 CHANGE MILEAGE OR PUT IN SERVICE MODE MANY THX
Lidahus
1st January, 2013, 01:23 AM
As I know the VD1-048 instrument clusters can only be done by OBD. General code for service mode is available for 24C32 only.
smartymarti
1st January, 2013, 10:47 AM
Disconnect battery then retry , it should be done no problem
dashradio
1st January, 2013, 03:06 PM
Go on to DP3 website and find this file for you to use
http://www.diagprog.org/img/zip-icon.gif Key_24C64.bin - file for Audi A1, VW Passat with Advanced Key system (http://www.diagprog.org/common/files_download.php?fid=195) (1.79 kB)
Please unzip the file before loading onto MMC card
dashtec
1st January, 2013, 07:25 PM
the car has normal key, not keyless system, would this be ok
dashtec
1st January, 2013, 10:47 PM
tried after battery disconnection, and also with dashradio file still no use, any1 any ideas most welcome thx
dashtec
1st January, 2013, 10:58 PM
please find files enclosed taken and different interval, if any1 can adjust manually much appreciated, 1750miles required thx
diagnoza_auto2000
2nd January, 2013, 03:02 PM
Will help you put this in service mode?
dashtec
10th January, 2013, 12:55 AM
still waiting to put in service mode thx
exe123
10th January, 2013, 01:19 AM
still waiting to put in service mode thx
Service mode will not help you at all. The so called service mode will just "damage" the immo area to allow access without a valid transponder.

In your case the immo system is working and access is denied because of wrong used seed&key/loader. You have to wait for an update