View Full Version : Chevrolte Malibu 2005
roman_auto
2nd January, 2013, 10:36 PM
Hi
need to do this malibu i understand the km is in the bsi Only
and if so where is the bsi
Thanks
valyboy
2nd January, 2013, 10:38 PM
inside the fuse box
roman_auto
2nd January, 2013, 10:55 PM
inside the fuse box
can you tell exacly where , in the car in the engine bay,left right
thanks
paul_mike
3rd January, 2013, 02:49 AM
center console, passenger side, there is a door access to the fuse block
digimile
3rd January, 2013, 03:02 AM
hi
i think over obd2 with jprog or usaprog...
thanks
afitijuana
4th January, 2013, 06:05 PM
hi
i think over obd2 with jprog or usaprog...
thanks
Definitely both wil do it in a Flash, some times usa prog damamge the dump will show 0 on cluster, if this is the case just do the cluster and will set the new value.
You will have to drill the rivet pot on the module, they can be replaced with nut and bolt.
But if you can do it by OBD would be best and easy way , beside as some one will thell you the like to work the OLD WAY and HATE THE OBD PLATAFORM.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.