AUDI TT / 8N1919880C / Flash broke ?

[CARPARTS]

AUDI TT / 1998-1999
8N1919880C D60 AF1

Needles don't work, KM-LCD & DATE-LCD don't work (sometimes yes)...
+++++++++++++++++++++++++++++++++++++++++++
908 readed with ETL / MASKSET = 3H62A
eeprom is empty / flash has data.
908 has NO labels or INSCRIPTION on the micro !!

the only option to read this MCU in ETL is the 1L87J !!
(in all other device's ETL gives "wrong echo from MCU")


1/ Can anyone repair the dump or send good working flash ?
2/ Do i need to replace the micro too, or only reprogram the original with a good flash ?
3/ if i need to replace the micro....which maskset is oke ?
2J74Y ?

Attached the flash dump + eeprom dump (empty) + mcu picture

[lupu_sandu]

You need a good dump for V5.87HL
Replace MCU, reprogram and you are done.

[CARPARTS]

oke, thank youyou have a good dump for this version ?

[milkatrek]

I have that same problem hc08 + hc912. Iam rewrite hc08 and not work.

Lupu you are sure it must be change hc08 mcu + dump ?

[CARPARTS]

which SW version you have Milkatrek ?

[milkatrek]

I check and let you know

[Cdoc]

AUDI TT / 1998-1999
8N1919880C D60 AF1

Needles don't work, KM-LCD & DATE-LCD don't work (sometimes yes)...
+++++++++++++++++++++++++++++++++++++++++++
908 readed with ETL / MASKSET = 3H62A
eeprom is empty / flash has data.
908 has NO labels or INSCRIPTION on the micro !!

the only option to read this MCU in ETL is the 1L87J !!
(in all other device's ETL gives "wrong echo from MCU")


1/ Can anyone repair the dump or send good working flash ?
2/ Do i need to replace the micro too, or only reprogram the original with a good flash ?
3/ if i need to replace the micro....which maskset is oke ?
2J74Y ?

Attached the flash dump + eeprom dump (empty) + mcu picture

hi
i have the probleme with MCU mask 3H62A i can t read, i have etl original, for read you take mask 1L87J, and i can take your file for my dash ?
thanks fab

[PETAR]

hi i have the same problem
carprog sometimes fix good flash sometimes need change msu