piasini dont read ecu denso

[jolidj]

hi friend. i have piasini tools without obd connection.
i try to read some ecu,59f,me7. me7.9.10 ext and the tool work fine, read and write , all ok. but wen i try to read the denso, ore kheini ore some same ecu the tool dont work, nothing ID nothing read and nothing write this ecu.

any help for this problem , ore compontent to change?
thanks in advance.

[kennfeld]

ask piasini staff they are very helpfull !

[jolidj]

my piasini is clone. any help

[sunduk112]

try to look DC i think problem is in power!
try to use 12DC not in piasini but to other fiding.

[jolidj]

i have all dc voltage.12v and 16v.try to do dc for ecu from 12v directly-

[kennfeld]

you need genuine tool to do them

[jolidj]

some friend read and write denso ecu with clone tool.

[wiseman]

What clone do you own, is it the version with the piasini sticker that comes separate or the revised case that is finished much better

[kennfeld]

i think it's mirror problem
you could identify or not ?

[Stanton]

Its probably your soldering to the pads. Try soldering again.

[jolidj]

i don.t indentify nothing . i risolder again but have the same problem. my piasini dont have piasini sticker. is black and dont have the obd socket connection . any test sugestion?

[kennfeld]

mine has no sticker i don't solder anything just over the obd plug !

[Stanton]

Navara Denso?

[jolidj]

i dont have obd socket

[kennfeld]

i dont have obd socket


strange all piasini tools have obd !!!
it's the 9 pin db9 same connector as com1 (RS232?

[jolidj]

yes i now this but i dont have .

[kennfeld]

it's the same wiring as the one supplyed with

cmdflash
kwp2000+
etc