PDA

View Full Version : piasini dont read ecu denso



jolidj
5th January, 2013, 05:48 PM
hi friend. i have piasini tools without obd connection.
i try to read some ecu,59f,me7. me7.9.10 ext and the tool work fine, read and write , all ok. but wen i try to read the denso, ore kheini ore some same ecu the tool dont work, nothing ID nothing read and nothing write this ecu.

any help for this problem , ore compontent to change?
thanks in advance.

kennfeld
6th January, 2013, 11:16 AM
ask piasini staff they are very helpfull !

jolidj
6th January, 2013, 02:19 PM
my piasini is clone. any help

sunduk112
6th January, 2013, 02:21 PM
try to look DC i think problem is in power!
try to use 12DC not in piasini but to other fiding.

jolidj
6th January, 2013, 03:17 PM
i have all dc voltage.12v and 16v.try to do dc for ecu from 12v directly-

kennfeld
6th January, 2013, 11:18 PM
you need genuine tool to do them

jolidj
10th January, 2013, 01:16 AM
some friend read and write denso ecu with clone tool.

wiseman
10th January, 2013, 02:27 AM
What clone do you own, is it the version with the piasini sticker that comes separate or the revised case that is finished much better

kennfeld
11th January, 2013, 08:19 PM
i think it's mirror problem
you could identify or not ?

Stanton
11th January, 2013, 10:18 PM
Its probably your soldering to the pads. Try soldering again.

jolidj
14th January, 2013, 11:18 PM
i don.t indentify nothing . i risolder again but have the same problem. my piasini dont have piasini sticker. is black and dont have the obd socket connection . any test sugestion?

kennfeld
14th January, 2013, 11:58 PM
mine has no sticker i don't solder anything just over the obd plug !

Stanton
15th January, 2013, 12:00 AM
Navara Denso?

jolidj
15th January, 2013, 03:03 PM
i dont have obd socket

kennfeld
16th January, 2013, 12:29 PM
i dont have obd socket


strange all piasini tools have obd !!!
it's the 9 pin db9 same connector as com1 (RS232?

jolidj
17th January, 2013, 04:54 PM
yes i now this but i dont have .

kennfeld
17th January, 2013, 05:51 PM
it's the same wiring as the one supplyed with

cmdflash
kwp2000+
etc