PDA

View Full Version : T5 EDC17 CP20 Tuning prot



chriskross
8th January, 2013, 11:44 AM
Hi

does someone know has VW t5 EDC17 CP20
03L907309k already tuning protection??

masterb
8th January, 2013, 01:01 PM
If you mean flashing over OBD ..
No
Have to make the job over Bootmode!

carmageddon
8th January, 2013, 01:32 PM
this ecu is TP

chriskross
8th January, 2013, 06:09 PM
i read file with g2.

plz can someone look reads it the flash correct??

filecloud
8th January, 2013, 06:28 PM
i read file with g2.

plz can someone look reads it the flash correct??
The reading is not OK!

chriskross
8th January, 2013, 06:43 PM
i readed it 3 times i always get the same content.

maybe ecu is to new for my g2?

ecu is virgin could maybe there be the problem??

is the eeprom read correct??

filecloud
8th January, 2013, 06:50 PM
What do you want to do with the ecu?

chriskross
8th January, 2013, 06:52 PM
i need the files to make a other already used ecu also virgin

filecloud
8th January, 2013, 06:57 PM
i need the files to make a other already used ecu also virgin
Checksums are fine. You can try.

kennfeld
9th January, 2013, 01:18 AM
i read file with g2.

plz can someone look reads it the flash correct??


seems the G2 only read up to 20000
then it read blank !!!

for me it just bad read even a virgin ecu must have good rom inside
virgin mean only that eeprom is without vin and without the immo keys set

mislav88
9th January, 2013, 02:31 AM
i need the files to make a other already used ecu also virgin

that wont work, g2 cant rewrite otp sectors in tricore, only optican can to it for now

filecloud
9th January, 2013, 08:56 AM
seems the G2 only read up to 20000
then it read blank !!!

for me it just bad read even a virgin ecu must have good rom inside
virgin mean only that eeprom is without vin and without the immo keys set

This could be the case, or maybe not.
I have seen many types of virgin ecus.

- Porsche GT2 virgin contains the same basic ecu content than the normal turbo. Gets reflashed to a basic running program first and then gets reflashed to a GT2 Software.

- MSS54HP BMW contains only a minimum block in both flashes almost like here. But already has a serial number which is checked online and can only be used once in the regular process. Ecu gets flashed to wake up and run and then it gets its program an calib and third it gets its VIN/IMMO data.

- Next ecu has full program, eeprom with basic instructions and needs to be aligned to the car with tester. Like a smart MEG1.1. Afterwards it is updated to the latest software.

-Other ecus are fully programmed to vin and only need to be attached to the car.

Everything is possible. :-)
To verify it would be fine if anyone could post another virgin read of any VAG EDC17 for check.
grettings,
filecloud

chriskross
9th January, 2013, 11:51 AM
today i read a used ecu from G6 CP 20 also with tricore 1796, and flash looks complete.

filecloud
9th January, 2013, 12:08 PM
today i read a used ecu from G6 CP 20 also with tricore 1796, and flash looks complete.
This file is not CP20. It is old CP14.

tech_cz
10th January, 2013, 01:31 PM
Hi can also please read the virgin EEPROM?
I think you do not need to flash ROM, OTP sectors etc.
Just virginize EEPROM.

WBR, Marek

chriskross
11th January, 2013, 08:27 PM
i found out this ecu has also virgin flash!!

normal if you buy a ecu from dealer it will be order by vin, it then contains the HW and a seperate SW number.

so my ecu as you can see has only a HW nr.
i have here a log from VCDS

Adresse 01: Motor
Steuerger?t-Teilenummer: 03L 907 309 K
Bauteil und/oder Version: H43 0050
Codierung:
Betriebsnummer:
VCID: 366776218968E1A8CBB
Erweiterte Identifikation/FAZIT
Identifikation: RB8-658
Datum: 17.06.12
Herstellernummer: 1313
Pr?fstandsnummer: 0351
Flash Status
Programmierungs Versuche(Anwendung): 0/0/0
Erfolgreiche Versuche(Anwendung): 0/0/0
Programmierungs Status: 00000000
Flash Datum: 00.00.00
Sonstiges
Hardwarenummer: 03L 907 309 K
ASAM Datensatz: EV_ECM20TDI01103L907309K
ASAM Datensatz Revision: 001003
Fahrzeug Informationen
Fahrzeug-Ident.-Nr.: XXXXXXXXXXXXXXXXX
VCDS Info:
Labeldatei: Keine
Readiness: Skript nicht verf?gbar.
ROD: EV_ECM20TDI01103L907309K.rod

so it can be flashed with different SW and i think only with vaspc

Joe019
12th January, 2013, 05:43 PM
Yes, you are right. The flash file is virgin and eeprom too.

The flash is ready for program the correct software by vaspc and eeprom too.

But i have a doubt in eeprom, im think its not good readed.

I have read same ecu for tuned and eeprom virgin has not the same structure like as pogramed one.

BR!

chriskross
14th January, 2013, 07:11 PM
Yes, you are right. The flash file is virgin and eeprom too.

The flash is ready for program the correct software by vaspc and eeprom too.

But i have a doubt in eeprom, im think its not good readed.

I have read same ecu for tuned and eeprom virgin has not the same structure like as pogramed one.

BR!

hey joe!

can you help me to flash it with vaspc? which file can i use and how?

chli1976
15th January, 2013, 12:47 PM
Yes, you are right. The flash file is virgin and eeprom too.

The flash is ready for program the correct software by vaspc and eeprom too.

But i have a doubt in eeprom, im think its not good readed.

I have read same ecu for tuned and eeprom virgin has not the same structure like as pogramed one.

BR!

Can you upload the virgin eeprom and flash

Joe019
15th January, 2013, 01:15 PM
hey joe!

can you help me to flash it with vaspc? which file can i use and how?


Hi m8!

I dont know how to use vaspc for flasing :(

You can try to flash it with a complete flash, and then adapt inmo into the car, but i think it will be difficult for do it without online autorization.

br

JOSEPH1975
13th February, 2013, 11:57 PM
that wont work, g2 cant rewrite otp sectors in tricore, only optican can to it for now

Really Optican overwrite OTP Sector in tricor?

Regards.

wiseman
14th February, 2013, 12:28 AM
Yes...can clone complete Ecu apart from mileage bytes