Peugeot 508 BSI and odo

[tatop]

Hi friend
I search pin for read and write BSI memory 95256 on rear PCB.

Inviato dal mio GT-P1000 usando Tapatalk

[tatop]

Hi friend
I search pin for read and write BSI memory 95256 on rear PCB.

Inviato dal mio GT-P1000 usando Tapatalk

original file 39000km
pleaSE INSERT 28000

[gogalv]

original file 39000km


Not 39000, = 39965 km. I want to see pin connection to 95256, and foto dash for your calculator.:ciao:
Pass PM

[immokill]

Not 39000, = 39965 km. I want to see pin connection to 95256, and foto dash for your calculator.:ciao:
Pass PM

Hi
I would like to see that connection to.

Regards

[tatop]

Not 39000, = 39965 km. I want to see pin connection to 95256, and foto dash for your calculator.:ciao:
Pass PM

yes right km ori
after post here photo

[tatop]

Not 39000, = 39965 km. I want to see pin connection to 95256, and foto dash for your calculator.:ciao:
Pass PM

friend u dont reset history????

[PremierD]

Did you ask for the history to be reset .. no you did not ............

[tatop]

Did you ask for the history to be reset .. no you did not ............

yes, in the file only modify km ...dont erase history
can u help me for erase history??

[gogalv]

friend u dont reset history????
Histori not....
On the other side there is no pin 95256?

[tatop]

Histori not....
On the other side there is no pin 95256?

can u write line for erase history??

[cinici]

peugeout 508 28000km :goodpost: pass pm

[drpeter]

can u write line for erase history??

You asked me for help is it still needed?

[tatop]

peugeout 508 28000km :goodpost: pass pm

tanks friend
can u erase history in the bsi???

[tatop]

You asked me for help is it still needed?

tank drpeter
yes km original is correct
can u modify km and erase history
tanks

[tatop]

for all friends
TANKSSSSSS fo help me
km ok but problem
how ERASE HISTORY in the bsi ???

[gogalv]

for all friends
TANKSSSSSS fo help me
km ok but problem
how ERASE HISTORY in the bsi ???

Try rezet history LEXIA

[tatop]

Try rezet history LEXIA

i dont have lexia

[diagtech]

Has anyone got eeprom pin out for back of board on this bsi or tips on how to split boards thanks

[88diablo]

I haven't seen this board exactly but what I do in general with these layered boards from peugeot is use some sharp good quality side snips and cut all pins down one side then bend the two boards apart by bending the other side of pins to 90degrees or cut the other side too if you don't want to bend. Them remove eprom to read and you will always have good dump. Replace eprom and then bend boards back together and solder legs together. Some people say you can force the boards apart by brute firce of pulling and I'm sure you maybe can but I don't like the risk of cracking pcb. My way may sound rough but it guarantees good read.

[diagtech]

These boards have brown plastic round the pins so they are not accesable for cutting but the pins going into the smaller board are not soldered they are like old x5 and range rover screens pushed in but are very tight dont want to risk damaging bsi by forcing apart

[jr59]

for erase history try with nyo and peugeot 407 siemens bsi eeprom 95256!
maybe works!