PDA

View Full Version : VW Navi MFD


appostol
8th January, 2013, 07:45 PM
Hi, I have a VW navi MFD 3B0 035 191 D.

How I can read eeprom in that FIS?

I know how to read it from clasik eeprom or MCU,
but how to read from FIS?
What is FIS?
What hardware is required to work with FIS?

Thanks.
olmar
8th January, 2013, 08:21 PM
Hi, I have a VW navi MFD 3B0 035 191 D.

How I can read eeprom in that FIS?

I know how to read it from clasik eeprom or MCU,
but how to read from FIS?
What is FIS?
What hardware is required to work with FIS?

Thanks.
http://www.digital-kaos.co.uk/forums/f176/vw-code-295024/
http://www.digital-kaos.co.uk/forums/f179/navi-mfd-where-sda-scl-90382/
appostol
8th January, 2013, 09:09 PM
Olmar my board is not like that on the picture.
Where I put power suply? Or just conect SDA and SCL and power from radio?

Thanks.
olmar
8th January, 2013, 09:27 PM
Olmar my board is not like that on the picture.
Where I put power suply? Or just conect SDA and SCL and power from radio?

Thanks.
a picture of the board
appostol
8th January, 2013, 10:25 PM
Here is dump from my VW navi MFD
3B0 035 191 D

Please send me code.

Thanks.
olmar
8th January, 2013, 10:38 PM
Here is dump from my VW navi MFD
3B0 035 191 D

Please send me code.

Thanks.
Try this....
volavka
8th January, 2013, 11:06 PM
Here is dump from my VW navi MFD
3B0 035 191 D

Please send me code.

Thanks.
try 0209.....
prusony
8th January, 2013, 11:19 PM
try 0209.....
If not 0209 , try enter -= 0290 =- :)
appostol
8th January, 2013, 11:52 PM
Olmar.

Is this new dump that i shoud write?
Or it is mine but with find code?
olmar
9th January, 2013, 09:20 AM
Olmar.

Is this new dump that i shoud write?
Or it is mine but with find code?
It's yours with code written
appostol
9th January, 2013, 09:54 AM
It is not 1191, but now i have problem because radio is loced. :( Someone has try to enter code before i did it.

Now what should i do?
appostol
9th January, 2013, 11:21 AM
I made it to unblock but stil no code, none of given 0209 or 0290 or 1191 is not valid.

Here is dump, i read it again.

HELP PLEASE thanks in advance.
prusony
9th January, 2013, 11:59 AM
Line 20 & 40 in dump is OK.
Line 60 is NO OK !!!!
Do line 60 same with lines 20 and 40,
then enter code -= 0290 =- .
olmar
9th January, 2013, 01:15 PM
Olmar.

Is this new dump that i shoud write?
Or it is mine but with find code?
Leave one hour power
Code is not supported (safe) not conect
SAFE conect to +
i tested
counter is reseted
appostol
17th January, 2013, 10:16 PM
I solved the problem, radio is working.

BIG THANKS FOR EVERYONE.:champions: