PDA

View Full Version : T5 EDC16U1 DTC OFF



mislav88
9th January, 2013, 01:39 AM
I have VW T5 with 1.9TDI AXB engine, EDC16U1 ECU.

I need to turn off DTC 16622 or P0238

veloseeped
9th January, 2013, 02:21 AM
I have VW T5 with 1.9TDI AXB engine, EDC16U1 ECU.

I need to turn off DTC 16622 or P0238

What's a reason?
Switching off error "high signal of pressure sensor" will not solve overboost problem.

mislav88
9th January, 2013, 02:22 AM
got a request from mechanic who is doing that car, he changed MAP sensor and wiring to ecu, car now runs fine but throws this error and mil on dash

veloseeped
9th January, 2013, 02:52 AM
got a request from mechanic who is doing that car, he changed MAP sensor and wiring to ecu, car now runs fine but throws this error and mil on dash

New sensor is 2.5 bar original sensor or he used another sensor for lower max pressure, for example, 2.0 bar sensor ?
NP to switch off error and MIL, but better use proper sensor or at least use 3.0 bar sensor and recalibrate signal in dump.
Just for test - but it's incorrect solution :bird:
Pass in PM

mislav88
9th January, 2013, 09:14 PM
at the end car came to my garage, problem were bad pins in ECU connector, changed them and everything works fine with stock file

thanks for help about dtc off anyway