PDA

View Full Version : 2011 Toyota PRIUS all smartkey lost.



sbtriny
9th January, 2013, 01:59 PM
Hello, DK members.
I have a Toyota prius 2011my all smartkey lost.
I tried smart ECU renew(93c86) by avdi.
but, it's not work.
somebody help me,please.

I attached original and renew binfiles.

immo_key
9th January, 2013, 05:27 PM
Hi mate

have u ignition on ?
please try "transponder by dump"

BR/imokey

bram380
9th January, 2013, 07:37 PM
precode smartbox prius:
smartkey prius toyota (https://www.rapidshare.com/files/874014041/new_Prius_2010_smart_93c86_original.rar)

sbtriny
9th January, 2013, 11:13 PM
Hi mate

have u ignition on ?
please try "transponder by dump"

BR/imokey

thank you for your help, immo_key
I programed smart ecu by avdi.
it can ignition on, but, transmission can't change.
only display shift P lock.
and it can't ignition off

thank you for your advice.

sbtriny
9th January, 2013, 11:17 PM
precode smartbox prius:
smartkey prius toyota (https://www.rapidshare.com/files/874014041/new_Prius_2010_smart_93c86_original.rar)

thank you for your help, bram380.
it can't regist smart key.
please, one more help me.
I attached transmission box eeprom.

thank you.

achaccha
10th January, 2013, 12:01 AM
Dear Friend.
your original file is fine, you can generate a key using TMPRO2 and TPX2.
Please if you can post images of the module Smart Key.
Good Luck

cklair
10th January, 2013, 07:31 AM
you dont need tran ecu dump if you use the same smart key.if you able to start the car scan the whole car see if you have any oter problem with tranny.

ali re
10th January, 2013, 08:42 AM
thank you for your help, immo_key
I programed smart ecu by avdi.
it can ignition on, but, transmission can't change.
only display shift P lock.
and it can't ignition off

thank you for your advice.
======================

sbtriny
11th January, 2013, 08:26 AM
Dear Friend.
your original file is fine, you can generate a key using TMPRO2 and TPX2.
Please if you can post images of the module Smart Key.
Good Luck

I don't have TMpro.
I have AVDI and Tango.

sbtriny
11th January, 2013, 08:28 AM
you dont need tran ecu dump if you use the same smart key.if you able to start the car scan the whole car see if you have any oter problem with tranny.

If I program used smart key by AVDI, it make problem?
I bought 4 smart keys at toyota service center.
two keys are used, two keys are new.

gwee
11th January, 2013, 10:29 AM
For the latest prius, there is no more immo box. You need to get the virgin data for the smartbox and transmission module.

sbtriny
11th January, 2013, 11:26 AM
For the latest prius, there is no more immo box. You need to get the virgin data for the smartbox and transmission module.

thank you for your answer.
bram380 send virgin data of smartbox.
it's success, smartkey renew.
but, can't regist smartkey.
so, I read transmission box.
it was change.
tranmision can't shift P position.
I tried write RH56, but, I can't.
so, I looking for another programmer.
attach file is transmission locked eeprom
smoeone tell me, please, what programmer can write RH56?

dekimin
11th January, 2013, 01:29 PM
Dear Friend.
your original file is fine, you can generate a key using TMPRO2 and TPX2.
Please if you can post images of the module Smart Key.
Good Luck


Hi friend

This new system, tmpro not do!
I've tried and the file does not match

Regard

marco70
11th January, 2013, 04:36 PM
smoeone tell me, please, what programmer can write RH56?

Elnec SEEprog, Wellon VP-590, 990

sbtriny
12th January, 2013, 07:52 AM
Elnec SEEprog, Wellon VP-590, 990

thank you marco70.
I'll buy vp-990, and test it next week.

thank you so much.

marco70
12th January, 2013, 10:27 AM
Choose memory ROHM BR93H56RF-W

achaccha
12th January, 2013, 01:48 PM
Hi friend

This new system, tmpro not do!
I've tried and the file does not match

Regard

How can you say TMPro 2 does the key to this case.
You can see the picture please
good luck

dekimin
13th January, 2013, 01:44 PM
How can you say TMPro 2 does the key to this case.
You can see the picture please
good luck



well
Us tpx2 into the hole tmpro and press write
you will know the answer :ciao:

Regard

ali re
13th January, 2013, 03:58 PM
HI

i have module153

i test with your dump

tmpro not woking for smart key with password 98

baboonia
13th January, 2013, 04:06 PM
For 2011 Prius can't you just use Techstream and reset using seedcode method?

koncimobil
13th January, 2013, 04:22 PM
edit smartbox ecu & change key data 98 to 34 54 94

eeddyy23
13th January, 2013, 09:24 PM
thank you for your answer.
bram380 send virgin data of smartbox.
it's success, smartkey renew.
but, can't regist smartkey.
so, I read transmission box.
it was change.
tranmision can't shift P position.
I tried write RH56, but, I can't.
so, I looking for another programmer.
attach file is transmission locked eeprom
smoeone tell me, please, what programmer can write RH56?
you need to remove it out the board in order to read write some times i have done some of this newer prius no issues just wipe it to 00s thats the virgin state

sbtriny
15th January, 2013, 04:39 AM
Choose memeory ROHM BR93H56RF-W

thank you for your advice.

sbtriny
15th January, 2013, 04:43 AM
you need to remove it out the board in order to read write some times i have done some of this newer prius no issues just wipe it to 00s thats the virgin state

thanks your advice.
but, my programmer can't erase.
so, I ordered a vp-990.
I'll test it, and report here.

thank you.

immo_key
16th January, 2013, 04:40 AM
Hi mate

Better to use orange5, often reading and writing RH56 the ecu and there is never a problem.
Did you try the "transponder by dump"? my avdi have trouble so I can not use "transponder by dump" logs I've sent and waiting for reply from Miro
Very interested in this case because now I have the same problem in 2012 camry hybrid.
In my case we have dash on after virgin smart box but can't registered even with orinal teachtrem.

Best Regard
imokey

vanos batam
16th January, 2013, 12:17 PM
Hi mate

Better to use orange5, often reading and writing RH56 the ecu and there is never a problem.
Did you try the "transponder by dump"? my avdi have trouble so I can not use "transponder by dump" logs I've sent and waiting for reply from Miro
Very interested in this case because now I have the same problem in 2012 camry hybrid.
In my case we have dash on after virgin smart box but can't registered even with orinal teachtrem.

Best Regard
imokey


no need virgin virginan bro

:champions:

immo_key
16th January, 2013, 01:03 PM
no need virgin virginan bro

:champions:

Dear pren

Are working on this car now and warehouse many others
I will copy 93c86 smart key in the car A [has 2 keys]
Then write the data 93c86 smart key in the car B [lost all smart key]
I did not find the ID box and only found steering lock that looks very difficult to open. Do I have to copy the ecu as well?
Is this true and car B will start with the key of A?

I understand "no need virginan virgin" but in my case the key can not be read with all the tools I have.
So please tell my friend how to do this :banghead:

Best Regard
imokey

devilkey
24th January, 2013, 07:21 PM
Any news /

Zohar
24th January, 2013, 11:28 PM
Besides changes in smartkeyecu and idcode box, you should modify eeprom of transmission ecu.
Abritus can't do this car, also tm-pro not works too. This car have a new algorithm and can be done only via hands. With right dumps it can be done via OBD with Techsteram or MVP Pro.

Good luck.

engmozaid
26th January, 2013, 06:12 PM
AVDI released new software for TOYOTA which help in SMART SYSTEM , be sure that your AVDI up todate because this update released 2 days ago , it is toyota lexus 4.2