Bosch ME 7.5 Engine Ecu PIN ?

[jaxone]

Hello.

I need to make an engine ECU swap on a Seat Leon 1.8T with this ECU :

Bosch Hardware Number: 0261208115
Bosch Software Number: 1037366379
Vw Software Number: 06A906032MJ 0003

Is there any IMMO on the ECU or it's not present in this one ?
If there is how can I read the IMMO PIN code from the replacement ECU ?

I can't see any 24c02 chip on this board.
On the other side of the board I can see 2x 8 Pins Chip :
3043550 RE60012
95040 3 - 9305K

Thank you in advance.

[k0mpresd]

95040 dump is what you need.

[jaxone]

The only problem I found out now is that the "new" ECU is an 06A906032DE and not an 06A906032MJ.

Is this still compatible or do I really need to get an 06A906032MJ ?

Can the 95040be read without desoldering ?

[yugo45]

The only problem I found out now is that the "new" ECU is an 06A906032DE and not an 06A906032MJ.

Is this still compatible or do I really need to get an 06A906032MJ ?

Can the 95040be read without desoldering ?
The ECU needs to be same part number.

To read chip with out desoldering it really depend of your programer.
Some programer can do it some can not.

[jaxone]

Thanks for the answer.

Looks like both 06A906032MJ and 06A906032DE come from same type of car with same type of engine code AUQ ... so software from ECM should be compatible. Even HW platform should be the same but software is newer on the 06A906032MJ ... this remains to be seen.

Also think 06A906032DE is Immo2 and should be able to code it to the car without a PIN ?